Amart Furniture 55075 User manual

Item Code: 55075
750mm
1600mm
900mm
1-7
ZIA DINING TABLE
ITEM CODE - 55075
ASSEMBLY INSTRUCTION
Imported by Amart Furniture Pty Ltd,Qld, Brisbane Australia
For any assistance ith assembly or for missing parts, please phone
Amart Furniture, Customer Service Freecall 1800 351 084.
Imported by Amart Furniture Pty Ltd,Qld, Brisbane Australia
For any assistance ith assembly or for missing parts, please phone
Amart Furniture, Customer Service Freecall 1800 351 084.

1600mm
900mm
Item Code: 55075
2-7
12
6
3
9
Approximate Assembly
Time:20mins 2 persons needed
BEFO E YOU STA T
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
2. Take care when lifting. Product should be assembled as near as possible to the point of use.
3. Ensure that you have all required contents for complete assembly.
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the the threads.
P E-ASSEMBLY P EPA ATION

EXPLODED EXAMPLE
F2
F3
F1
Item Code: 55075 3-7

CHECKLIST
Rods 730mm x 4
A B C
PA T NUMBE QTY DIMENSION
F1
F3
F2
1
4
Hex Nut x 8
1600mm x 900mm x 10mm
75mm x 720mm
Chrome Feet
Spanner x 1
4
Nut Tightener x 1
D
Washer x 4
E
Item Code: 55075 4-7

1
EQUI ED FO STEP 1
Rods 730mm x 4
AB
Hex Nut x 4
D
Spanner x 1
B
A
2
1a
1b
1
a: S rew the Hex Nuts to the Rods
b: S rew the Rods to the aluminium plate on Glass
: Tighten the Hex Nuts to the aluminium plate
on Glass
B
A
A
AF1
F1
B
Pla e the Stainless Steel Legs to the aluminium plate on Glass as shown.
F2 F1
F1
F1
F2
Item Code: 55075 5-7

Tighten all nuts, being careful not to over tighten. Now you can turn
the assembled product upside down.
3
EQUI ED FO STEP 4
Washer x 4
B
Hex Nut x 4
C E
Nut Tightener x 1
B
C
F3
Se ure the Chromed Feet to the Rods using Hex Nuts and Washers
F3 A B C
Item Code: 55075 6-7

If the glass is chipped or broken, stop using the product and consult the place of
purchase.
Do not drop, drag or strike glass.
Do not sit or stand upon the glass surfaces.
Do not place very hot or cold items on the glass unless adequately thick table mats are
used to prevent such items coming in contact with the glass. Do not place heavy objects
on glass.
Avoid scratching the glass or using as a chopping surface.
Do not strike the glass with hard or pointed items.
When cleaning the glass panels, use a damp cloth with washing up liquid or soft soap
if necessary.
Do not use washing powders or any other substances containing abrasives that may
potentially scratch the glass.
CA E AND MAINTENANCE
ASSEMBLY IS COMPLETE
Item Code: 55075 7-7