Amart Furniture LE FRANSCHHOEK 52195 User manual

152195
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
LE FRANSCHHOEK- QUEEN BED
ITEM CODE 52195
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084

252195
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product
2. Take care when lifting. Product should be assembled as near as possible to the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads

352195
PARTS LIST
1
HEADBOARD
2
FOOTBOARD
3
SIDERAIL
4
CENTRE RAIL
5
SUPPORT LEGS
6
SLATS
a. Bolt M6x10
8pcs
b. Bolt M8x60
2pcs
c. Allen key M5
1pc
d. Allen key M4
1pc
e. Screw M4x30
16pcs
f. Screw M4x40
2pcs
g. Flat Washer
2pcs
h. Lock Washer
2pcs

452195
ITEMS REQUIRED
a. Bolt M6x10
8pcs
c. Allen key M5
1pc
Attach side rail ( 3 ) to headboard (1) and footboard (2) using
bolts (a).
Tighten with Allen Key (c).
c
aX8
2

552195
ITEMS REQUIRED
b. Bolt M8x60
2pcs
d. Allen key M4
1pc
g. Flat Washer
2pcs
h. Lock Washer
2pcs
Attach Support legs (5) to Centre rail (4) with bolts (b) and Flat
Washers (g)&(h).
Tighten with Allen Key (d).

652195
ITEMS REQUIRED
f. Screw M4x40
2pcs
Attach centre rail (4) to Headboard (1) and Footboard (2) using
Screw (f).
Use Screwdriver or Power Drill on Low Speed.
1
f

752195
ITEMS REQUIRED
e. Screw M4x30
16pcs
Attach Slats (6) to Siderail (3) using Screw (e).
Use Screwdriver or Power Drill on Low Speed.
Please only screw down every 2nd slat.
First and last slats need two screws each.

852195
ASSEMBLY IS COMPLETE
CAUTION
Always Lift Your Bed When Moving/Relocating – Do Not Drag.
Dragging Can Cause The Centre Support Legs To Bend/Break

Care and maintenance
•A multi-step finish is applied to all our furniture, but all wood comes from
nature. Because of this, there will be natural variations in surface texture
and grain like knots, mineral streaks and sap runs that may affect the finish.
These differences in character are not defects, but distinctions that make
each piece of furniture unique.
•Our furniture is built to last. Following these steps for basic care should
protect your investment for years to come.
•Dust frequently with a clean damp lint-free cloth. This will help remove
abrasive build up which can damage a finish over time.
•Do not place hot objects on any furniture surface. Always use a hot plate or
placemat. Laminate and lacquer finishes on table tops provide added
scratch and heat resistance to our furniture, but they can still be damaged
without proper care.
•Avoid exposing your furniture to strong sunlight, heat outlet, open windows
or dampness. Prolonged exposure to direct sunlight
can fade the finish of your furniture, while extreme temperature and
humidity changes can cause cracking or splitting.
•Do not expose your furniture to any liquids. Never allow water to sit on your
furniture. Alcohol, nail polish and perfume are also dangerous as they will
dissolve the lacquer finish on contact and may require professional repairs.
•Do not allow plastic to come in direct contact with your furniture. Chemicals
in the plastic of placemats etc may soften and mark
the finish if left in contact with the furniture for a period of time.