Amart Furniture 67368 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351084
ASSEMBLY INSTRUCTION
TANGIER DINING CHAIR
ITEM CODE 67368
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture , Customer Service Free call 1800 351 084
PAGE 1 OF 5 67368
1050MM
435MM
645MM

PRE-ASSEMBLY PREPARATION
PAGE 2 OF 5 67368
BEFORE YOU START…
1. CHOOSE A CLEAN, LEVEL, SPACIOUS ASSEMBLY AREA. AVOID HARD SURFACES THAT MAY
DAMAGE THE PRODUCT.
2. CHECK AND ENSURE THAT YOU HAVE ALL THE REQUIRED CONTENTS FOR COMPLETE
ASSEMBLY.
3. ALWAYS READ THE ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE BEGINNING ASSEMBLY.
4.
IMPORTANT NOTE – BEFORE FINALLY TIGHTENING THE BOLTS, PLACE THE ASSEMBLED CHAIR
UPRIGHT ON A LEVEL SURFACE AND SIT CAREFULLY ON THE CHAIR TO ENSURE THE CHAIR
LEGS ARE ALIGNED AND LEVEL. THEN TIGHTEN ALL BOLTS AND YOUR CHAIR IS READY FOR
USE.
KEEP ALL HARDWARE PARTS AND PACKAGING OUT OF REACH OF SMALL CHILDREN.

PAGE 3 OF 5 67368

PAGE 4 OF 5 67368
IMPORTANT NOTE – BEFORE FINALLY TIGHTENING THE BOLTS, PLACE THE
ASSEMBLED CHAIR UPRIGHT ON A LEVEL SURFACE AND SIT CAREFULLY ON
THE CHAIR TO ENSURE THE CHAIR LEGS ARE ALIGNED AND LEVEL. THEN
TIGHTEN ALL BOLTS AND YOUR CHAIR IS READY FOR USE.

PAGE 5 OF 5
CARE AND MAINTENANCE
•PROTECT FROM DIRECT SUNLIGHT
•REGULARLY DUST WITH A CLEAN DRY DUSTER. WIPE
OCCASIONALLY WITH CLEAN DAMP CLOTH
•DO NOT REMOVE CUSHION COVERS FOR SEPARATE
CLEANING
•DO NOT DRY CLEAN
•DO NOT USE SHAMPOO
•DO NOT USE DISHWASHING OR LAUNDRY
DETERGENTS
•DRY IN SHADE AWAY FROM DIRECT HEAT
•DO NOT WET FILLING
•WIPE WITH A CLEAN DRY CLOTH
•DO NOT RUB
•DO NOT SPOT CLEAN WITH ANY SOLVENT
•DO NOT USE CHAIR/STOOL AS A LADDER
•DO NOT CLIMB ON THE CHAIR/STOOL
•DO NOT STAND ON THE FOOT-REST OF THE CHAIR,
AS THIS COULD LEAD TO THE STOOL BECOMING
UNBALANCED AND OVERTURNING
67368