Amart Furniture 62666 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
SETTLER MK2 DISPLAY CABINET
ITEM CODE 62666
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
162666

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
262666

362666
SAFETY BRACKETS INSTRUCTIONS
NOTE- This This product must be fixed to a wall. It is important to ensure the correct wall
fixings are used. Failure to do so may result in personal injury or property damage caused by
the item toppling over. As wall materials vary greatly, the fastener required to fix this
product to a wall is not included. If unsure, consult your local hardware store for advise on
wall fixings suitable for your situation.

462666
CARE AND MAINTENANCE
Timber
As our timber is supplied from sustainable forests there will be natural variations in surface
texture and grain like knots, mineral streaks
and sap runs that may affect the finish. These differences in character are not defects, but
distinctions that make each piece of
furniture unique
Our furniture is built to last. Following these steps for basic care should protect your
investment for years to come
•Dust frequently with a clean damp lint-free cloth. This will help remove abrasive build up
which can damage a finish over time
•Do not place hot objects on any furniture surface. Always use a hot plate or placemat.
Laminate and lacquer finishes on table tops
•provide added scratch and heat resistance to our furniture, but they can still be damaged
without proper care
•Avoid exposing your furniture to strong sunlight, heat outlet, open windows or dampness.
Prolonged exposure to direct sunlight can
•fade the finish of your furniture, while extreme temperature and humidity changes can
cause cracking or splitting
•Do not expose your furniture to any liquids. Never allow water to sit on your furniture.
Alcohol, nail polish and perfume are also
•dangerous as they will dissolve the lacquer finish on contact and may require professional
repairs
•Do not allow plastic to come in direct contact with your furniture. Chemicals in the plastic
of placemats etc. may soften and mark the finish if left in contact with the furniture for a
period of time
GLASS
•If the glass is chipped or broken, stop using the product and consult the place of
purchase
•Do not drop, drag or strike glass
•Do not sit or stand upon the glass surfaces
•Do not place very hot or cold items on the glass unless adequately thick table mats are
used to prevent such items coming in contact with the glass
•Do not place heavy objects on glass
•Avoid scratching the glass or using as a chopping surface
•Do not strike the glass with hard or pointed items
•When cleaning the glass panels, use a damp cloth with washing up liquid or soft soap if
necessary. Do not use washing powders or any other substances containing abrasives
that may potentially scratch the glass