Amart Furniture BROOKHAVEN 73086 User manual

173086
ASSEMBLY INSTRUCTION
BROOKHAVEN - KING BED
ITEM CODE - 73086
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
for any assistance to assembly or for missing parts please phone
Amart Furniture, Customer Service Freecall 1800 351 084
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
for any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Freecall 1800 351 084
1910mm
1350mm
2365mm

2
BEFORE YOU START :
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product
2. Take care when lifting. Product should be assembled as near as possible to the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
PRE-ASSEMBLY PREPARATION
ALLOW 30 MINUTES 2 PEOPLE REQUIRED
ADDITIONAL TOOLS REQUIRED
We recommend using screw
driver to put this item together.
However if you choose to use a
power drill it must be used on
LOW SPEED (LOW TORQUE)
as too much pressure could
damage the product.
73086

PARTS LIST
D
C
BOLTS
M8x30: 12pcs
SPRING WASHER
M8x1.2x13: 12pcs
373086
6
5
4
3
2
1HEADBOARD
FOOTBOARD
SIDE RAILS
SLATS
CENTRE RAIL
SUPPORT LEGS
1PC
2PCS
1PC
14PCS
2PC
4PCS
SCREW
Ø4X30: 28pcs
BWASHER
M8x2x19: 12pcs
E
GF ALLEN KEY
M4X59: 1pc
BOLTS
M6X50: 4pcs
1
2
4
5
6
3
DOWEL
Ø8X30: 8pc
BOLTS
M5x20: 4pcs
H

473086
Step 1: Attach the side rail (3) with the headboard (1) and footboard (2)
using bolts (A), washer (B), spring washer (C), and using allen key (G)
GALLEN KEY
M4X59: 1pc
C
BOLTS
M8x30: 12pcs
SPRING WASHER
M8x1.2x13: 12pcs
BWASHER
M8x2x19: 12pcs
3
2
1
G
A
B
C

573086
Step 2:
Fasten the center rail (5) with the Support legs(6)
using bolts (D), dowel (F), allen key (G)
GALLEN KEY
M4X59: 1pc
FDOWEL
Ø8X30: 8pcs
BOLTS
M6X50: 4pcs
5
6
G
D
D
F

SCREW
Ø4X30: 28pcs
673086
E
Step 3:Attach the slats (4) to the side rails (3) with screws (E)
Not provide
E
4
3

773086
Step 4: Removed 4 bolts (H) with a screwdriver to take out handles
which attached inside the front of drawers.
BOLTS
M5x20: 4pcs
H
H

873086
Step 5: Tight 4 bolts (H) with a screwdriver again to install handles
outside the front of drawers.
BOLTS
M5x20: 4pcs
H
H

ASSEMBLY COMPLETE
73086
9
CAUTION:
ALWAYS LIFT YOUR BED WHEN MOVING/RELOCATING - DO NOT DRAG.
DRAGGING CAN CAUSE THE CENTRE SUPPORT LEGS TO BEND/BREAK.

10 73086