Amart Furniture FORTEO 67632 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
FORTEO CORNER CHAISE
ITEM CODE 67632
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
PAGE 1 OF 967632

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose aclean, level, spacious assembly area.Avoid hard surfaces that may
damage the product
2. Take care when lifting.Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
PAGE 2 OF 967632

PARTS LIST
PART Ⅱ
PART Ⅰ
67632
PAGE 3 OF 9
PLEASE TAKE NOTE:
YOUR SOFAS FEET AND BOLTS\SCREWS ARE LOCATED AT THE END OF
THE RED STRING, UNDENEATH THE ZIP IN YOUR DUST COVER.
PIECES REQUIRE FOR ASSEMBLY ARE LOCATED INSIDE THE DUST COVER
UNDERNEATH SOFA.

Step 1
Step 2 PART ⅠASSEMBLY COMPLETED
PART Ⅰ
67632
PAGE 4 OF 9
DETAILS (1) -Align base plate of each foot (A) with the pre-threaded holes in the undersides
of the sofa as shown in the below diagram. Insert Bolt (B) and tighten by turning clockwise
using Allen key (C)
DETAILS (2) -Align base plate of each foot (D&E) with the pre-threaded holes in the
undersides of the sofa as shown in the below diagram..
C
B
A
D
IMPORTANT:
PLEASE ENSURE FEET ARE TIGHTENED SECURELY BEFORE USE!
E

PART Ⅱ
Step 3
Step 4 PART ⅡASSEMBLY COMPLETED
67632
PAGE 5 OF 9
C
B
A
D
DETAILS (1) -Align base plate of each foot (A) with the pre-threaded holes in the undersides
of the sofa as shown in the below diagram. Insert Bolt (B) and tighten by turning clockwise
using Allen key (C)
DETAILS (2) -Align base plate of each foot (D) with the pre-threaded holes in the undersides
of the sofa as shown in the below diagram..

Step 5 ASSEMBLY COMPLETED
PART Ⅱ
PART Ⅰ
PART Ⅱ
PART Ⅰ
67632
PAGE 6 OF 9
IMPORTANT:
PLEASE ENSURE FEET ARE TIGHTENED SECURELY BEFORE USE!

Step 6 PLUG TRANSFORMER AT BACK OF SOFA
Safety Note:
Transformer is not to be
placed under or within the
recliner structure.
67632
PAGE 7 OF 9

67632
PAGE 8 OF 9
READ THESE INSTRUCTIONS THOROUGHLY BEFORE
USE:
DANGER: TO REDUCE THE RISK OF ELECTRIC SHOCK:
Always unplug from electric outlet before cleaning.
WARNING: RISK OF INJURY
Keep children away from extended footrest and any moving parts.
CAUTION: Do not allow children to play on this electric recliner or
operate the powered mechanism. The leg rest folds when closing and
could possibly cause injury to a child. Always leave the recliner in an
upright and closed position when not in use. Keep hands and feet
clear of mechanism. Only the occupant should operate it.
POWER CORD SAFETY
WARNING: unplug and remove power cord from wall when not in
use and store out of reach of children.
Take care when moving recliner that wall and transformer cords are
not under the base or they may get damaged.
-NEVER OPERATE ELETRIC RECLINER IF IT HAS A DAMAGED CORD
OR PLUG.
WARNING: TO REDUCE RISK OF BURNS, FIRE, ELECTRIC SHOCK OR
PERSONAL INJURY TO PERSONS:
• Use only for its intended purpose
• Never press or activate control switch if you are not seated in
recliner
• Only the occupant should activate the control switch
• Never operate with more than one person occupying seat
• Never sit or stand on the footrest

CARE LABEL
67632
PAGE 9 OF 9