4
EN
IMPORTANT SAFEGUARDS
Read these instructions carefully and retain them for future use.
If this product is passed to a third party, then these instructions
must be included.
When using the product, basic safety precautions should always be
followed to reduce the risk of injury including the following:
• Make sure, that the mounting surface can support the weight of the
product. Plasterboards are not a suitable mounting surface. If you
need to install the product on a plasterboard, make sure to drill into
the studs behind the plasterboard.
• This product requires 3 people for safe installation.
• Use only with non-permanent markers.
• When drilling holes, make sure that you do not damage any cables or
tubes behind the wall.
Before First Use
• Check for transport damages.
DANGER Risk of suffocation! Keep any packaging materials
away from children – these materials are a potential source of danger,
e.g.suffocation.
Cleaning and Maintenance
Cleaning
• To dry-erase the board, use the provided eraser (G)only.
• Clean only when erased.
• To clean, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers,
metal or sharp utensils to clean the product.
Maintenance
• Store in a cool and dry place away from children and pets, ideally in
original packaging.
• Avoid any vibrations and shocks.
