Vivo DESK V000C User manual

1
Sit and Stand Desktop
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model: DESK V000C
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
-https://vivo us.com/products/ -desk v000c
Tools Required:
phillips screwdriver, scissors
ackage Contents
A (x1)
B (x1)
C (x1)
Warning!
DO NOT place hands on or near support bars. Pinch points are created during
lifting and lowering the work surface. Failure to follow these instructions may
result in serious personal injury.
I (x1)
4mm J (x1) K (x2) L (x4)
D (x2) E (x1) F (x16) G (x6) H (x6)

2
Assembly Steps
Carefully remove desk frame and contents from packaging.
Cut ties from frame (A).
Step 1:
Step 2:
Place desktop (B) upside down on table. Place frame (A) upside
down on desktop, and secure with x12 screws (F).
A
Step 3:
Mount front feet with pads (E) to frame (A) using 6 screws (H),
and apply rubber feet (L) to bottom of frame. Mount brackets
(D) to keyboard shelf with 6 screws (G).
Step 4:
Hang assembled keyboard tray on pre-installed screws.
Tighten screws.
E
E
L
H
I
D
G
C

3
Step 5:
Squeeze both handles to raise or lower desktop.
Step 6:
Arrange items on desktop as desired.
WARNING: Keep monitor and laptop base fully on the
desktop surface. Allowing any part of base or stand to
hang off the edge may result in property damage and or
personal injury.
Step 7:
Attach cable clip (I) where desired.
Step 8:
Manage cables.

4
If you do not understand these directions, or if you have
any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are
no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual.
We cannot be liable for damage or injury caused by
incorrect assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please
contact us. We are happy to replace parts to ensure you
have a fully functional product.
Safety Warning
Contact us at
Last updated: 430/2018
Online Version
Warnings!
Leave enough slack in cable
to allow for full range of
vertical motion (1 ” / 38 cm).
Failure to heed this warning
may result in property
damage and or personal
injury.
To avoid the potential to
pinch cables it is important
to follow the cable routing
instructions in this manual.
Failure to follow these
instructions may result in
equipment damage or
personal injury.
Scan the QR code with your mobile device or
follow the link to helpful videos and
specifications related to this product.
-https://vivo us.com/products/ -desk v000c