Amber AC2600 User manual

Amber Setup Guide for:
AC2600 Router
Amber OS

Physical Set up - Cable Setup
Connect WAN Cable
Standalone Modem
1. Connect modem WAN port to Amber's WAN port (Blue).
2. Please reset your Modem. To reset modem, you can either unplug power
cable for 10-20 seconds and plug back in or by pressing reset button on the
back for the device for 10 seconds.

Modem with built-in-router
1. If you use a modem with built-in router, connect Amber LAN port to the
router's network (LAN) port.
2. Please reset your modem with built-in-router. To reset modem with built-in-
router, you can either unplug power cable for 10-20 seconds and plug back
in or by pressing reset button on the back for the device for 10 seconds.

Computer Set Up:
Connect PC LAN to Amber LAN port
Power up your Amber:
Insert power cable then press power button.

Amber Wi-Fi Router Setup
Now that we have completed the physical set up, we will continue with the AC2660 set up, so
please follow instructions.
1. Open your browser and go to the http://latticerouter.local/.
You can as well access router gateway from Https://192.168.01.
2. Select “Detect Connection Type” if you do not know the settings provided by yout ISP.
Note: Manual set up is recommend for experienced users.

3. You will be promoted to use DHCP, please select and continue.
4. We have completed the Internet connection. Now we will continue with storage set up, so please
click on “Setup My Storage”

Amber Storage Setup
Now that we have completed the Wi-Fi Router set up, we will continue with the Amber Storage
set up.
1. You will be re-directed from the Wi-Fi Router set up, but if this is not the case then you can
always set up storage from https://latticenode.local/ (If you are redirect from the router
setting, you won’t see this page)

2. If you are redirect from the router setting, you won’t see the login page. If you reboot the device
before setting the storage, you need to log in to Amber using the following credentials:
Account: admin / Password: admin1234
3. You will be re-directed to Amber settings. Here you will be able to change Amber name and
encrypt this storage. Once you have completed please click “Apply”
Note: If you encrypt storage you will have to unencrypt after every restart of the device. Please do
not lose your encryption key as you will not be able to unencrypt storage.

4. Here you will be able to manage the administrator settings for your Amber. This includes changing
the admin password and signing up for your free LatticeNest account. Once you have completed
this click on “Next”
5. Here you will create new Amber users so thy have access to your storage device. Once you have
completed this click on “Next”

6. This will complete set up wizard.
7. You can now use your Amber storage.