AMC Lario Smart Control Panel User manual

Smart Control Panel
Installation manual(pag. 1)
Manuale di installazione(pag. 34)
www.lariohub.com

1www.lariohub.com LARIO - Installation manual v1.2 EN
Index
GENERAL INFORMATION
1. IMPORTANT NOTES 2
2. PACK CONTENTS 2
3. CONFORMITY 2
4. STANDARDS 2
5. MANUFACTURER 3
6. FEATURES 3
7. WARRANTY 3
8. DESCRIPTION 4
9. ASSEMBLY 5
10. CONTROL PANEL POSITIONING 6
11. 4G MODULE CONNECTION (L 4W) 6
12. LED OPERATION 7
13. PROCEDURES THAT CAN BE ACTIVATED VIA
THE KEYS (RESET AND WI-FI) ON THE BOARD 8
14. SWITCHING OFF THE CONTROL PANEL 8
PROGRAMMING VIA APP
1. CREATING AN INSTALLER ACCOUNT 9
2. INTRODUCTION 10
3. TRANSFER OF CONTROL PANEL TO ANOTHER
ACCOUNT 10
4. CONNECTION TO THE CLOUD 11
4.1. CONNECTION TO THE CLOUD VIA WI-FI
(first connection) 11
4.2. CONNECTION TO THE CLOUD VIA 4G
(first connection) 12
4.3. CONNECTION TO THE CLOUD VIA WI-FI
(control panel already connected via 4G) 14
4.4. CONNECTION TO THE CLOUD VIA 4G
(control panel already connected via Wi-Fi) 14
5. CONTROL PANEL PROGRAMMING 15
5.1. HUB MENU 16
5.2. DEVICES MENU 18
REMOTE CONTROL (TR800) 19
INFRARED DETECTORS
(IF800 - IF800/P - IF800/T) 20
CONTACTS (CM800mini - CM800 - CU800) /
SEISMIC (SS800) / GLASS BREAKAGE (GS800) 21
INFRARED DETECTOR WITH CAMERA
(IFV800) 22
2 RELAYS OUTPUTS EXPANSION (OUT800) 23
WIRELESS REPEATER (RP800) 24
SMOKE DETECTOR (SF800) 25
SIRENS (SRL800 - PZ800) 26
5.3. USERS MENU 27
5.4. SCENERY MENU 28
AUTO ARM/DISARM 28
RELAYS 29
5.5. NOTIFICATIONS MENU 31
5.6. LOG EVENTS MENU 31
5.7. CMS MENU 32
5.8. UPDATE MENU 33
English

2www.lariohub.com LARIO - Installation manual v1.2 EN
1. IMPORTANT NOTES
All the products mentioned in this manual comply with the rules relating to the EN 50131 standard.
IMQ certification - Grade 2 - Class 2 security systems
To ensure compliance with these standards, the control panels must be programmed as indicated in the specific
tables in the installation manual.
The cardboard box contains:
• ABS cabinet
• LARIO control panel electronic board
• LITHIUM buffer backup battery model 18650
• anti-opening and removal tamper kit (mandatory for EN standards)
• screws to assemble the parts and to close the cabinet
• adhesive label with product data
The cardboard box does not contain:
• fisher for wall fixing
• standard 12Vdc @ 1A power supply unit (we suggest the AMC model L-AL power supply)
• 2G - 4G module
The LARIO programming APP can be downloaded from the APPLE and GOOGLE markets.
The installation manual can be downloaded from www.lariohub.com
• The information contained in this manual is for informational purposes only and is the property of
AMC Elettronica.
• All the information contained in this manual is subject to change without notice.
• Each part of this manual must be interpreted and used only for the purposes for which it has
been drawn up. Any use other than that prescribed must be authorised by AMC Elettronica, otherwise
the warranty lapses.
• All trademarks, symbols and examples contained in this manual belong to their respective owners.
AMC Elettronica declares that the LARIO intrusion alarm control panels comply with the requirements and
provisions established by directive 1999/5/CE.
3. CONFORMITY
4. STANDARDS
2. PACK CONTENTS
GENERAL INFORMATION

3www.lariohub.com LARIO - Installation manual v1.2 EN
AMC Elettronica guarantees a product free from manufacturing defects.
As the product is not installed by the manufacturer and can be used together with other products not made by
AMC Elettronica, the manufacturer does not guarantee and is not responsible for damage and/or theft or other
types of problems deriving from incorrect installation and/or system configuration.
The guarantee therefore does not cover:
• improper use of the equipment
• programming errors or negligence on the part of the installer
• manipulation and vandalism
• wear of the product
• lightning, floods, fire
AMC Elettronica reserves the right to repair or replace the defective product within the established limit of 24
months. Any use other than that indicated in this manual will invalidate the warranty.
The installation must be performed to a professional standard by specialist personnel.
7. WARRANTY
6. FEATURES
5. MANUFACTURER
AMC ELETTRONICA
Via Pascoli, 359 - Loc. Mirovano - 22040 Alzate Brianza (CO) Italy
[email protected] - www.amcelettronica.com
• Power supply 12 Vdc
• Nominal consumption 100 mA
• Maximum consumption 400 mA
• Battery 18650 Lithium 3.7 Vdc 2Ah
• Wireless 868 full duplex in diversity of frequency
• Wi-Fi on board
• 4G optional module
• 3 areas
• 3 programs for each area
• 64 users
• 64 zones
• 32 generic devices (detectors, etc.)
• 20 remote control
• 4 wireless repeater
• 4 keypads
• 4 sirens
• 8 outputs expansions
• 100 programmable sceneries
• 6 indication LEDs:
- Power supply
- Battery
- Radio signal
- SIM
- Wi-Fi
- Cloud activity
• Grade 2, Class II

4www.lariohub.com LARIO - Installation manual v1.2 EN
8. DESCRIPTION
Lario is a fully wireless alarm control panel with Internet connectivity via an integrated Wi-Fi module
directly in the board, with the possibility of communicating also with mobile data in 4G technology (L 4W
optional module).
The control panel is programmed with a dedicated APP available for both Android and iOS.
It is equipped with a 18650 lithium backup battery that guarantees over 24 hours of autonomy without mains
power.
18650 battery compartment
status LED
terminal tamper
power supply connector
reset key
Wi-Fi key
connector for 4G module
Wi-Fi module
indoor use

5www.lariohub.com LARIO - Installation manual v1.2 EN
Insertion of the board in the ABS cabinet using the
supplied screws.
fig. 1
9. ASSEMBLY
Connecting the tamper kit.
Connection of the 12Vdc @ 1A power supply (it is
advisable to use the AMC L-AL power supply unit)
Housing of the 4G module model L 4W
4G module antenna connection
antenna
connector
antenna
sticker
fig. 2
fig. 3 fig. 4
fig. 5

6www.lariohub.com LARIO - Installation manual v1.2 EN
The Lario control panel is a wireless system, therefore during the installation phase we recommend that you
carefully choose its positioning with respect to the system to be created.
An incorrect installation position could be the cause of subsequent problems of various kinds (range,
disconnection from the Cloud, poor 4G signal, etc.).
It is advisable to carry out the following checks before fixing the control panel:
• good Wi-Fi signal
• stable 4G signal
• good radio reception of all equipment that must be associated with the hub
Avoid installing in the presence of the following environmental conditions:
• near metal or metal-containing walls (plasterboard)
• in damp environments
• in environments with stone walls
For installation of the accessories, avoid attaching them to metal structures as the radio signal could be reduced.
The Lario control panel can be connected to the Cloud via the 4G module
which can be used as a backup of the Wi-Fi carrier, or as the main carrier.
To connect the module:
1. Disconnect the power supply from the motherboard
2. Press the Wi-Fi and RESET keys simultaneously for 3 seconds
(all LEDs off)
3. Connect the module
4. Insert the SIM card in the appropriate slot
5. Restore the power supply
10. CONTROL PANEL POSITIONING
11. 4G MODULE CONNECTION (L 4W)
SIM card slot
4G signal level indicator

7www.lariohub.com LARIO - Installation manual v1.2 EN
12. LED OPERATION
On the front of the cover there is a two-colour LED to indicate the regular operating status of the control panel
(BLUE) or of anomaly (RED).
In the event of an anomaly, it is necessary to open the front of the cover and check the problem in detail.
Each individual LED has a precise meaning:
Status ok Anomaly in progress
BLUE LED - power supply OK
RED LED - no power supply
BLUE LED - battery OK
RED LED - faulty battery
BLUE LED - correct radio transmissions
RED LED - presence of errors in radio transmissions
BLUE LED - SIM working
RED LED - SIM not working
LED OFF - module not present
BLUE LED - Wi-Fi OK / BLUE LED flashing - Wi-Fi searching
RED LED - no Wi-Fi signal from the router
LED OFF - Wi-Fi disabled
BLUE LED - CLOUD online
RED LED - CLOUD offline
Alternating BLUE and RED flashes indicate that the control panel is undergoing maintenance.

8www.lariohub.com LARIO - Installation manual v1.2 EN
To turn off the control panel, disconnect the power supply and press the RESET and WI-FI keys at the same
time for approximately 3 seconds.
TOTAL RESET (factory setting)
The control panel will be reset to factory data; all programming data will be lost.
Keep the RESET key pressed and follow the sequence of the RED LEDs, they will all turn on one at a time and
then all will turn off one at a time. Release the key and check that all the LEDs flash BLUE.
RESTARTING THE CONTROL PANEL WITHOUT LOSS OF PROGRAMMING
To restart the control panel, without losing any programming, briefly press the RESET key.
All PURPLE LEDs will light up. The control panel is restarting.
RESETTING THE INSTALLER PASSWORD
If it is necessary to change the installer password, it is possible to perform a partial reset without losing the
programming data. Hold down the RESET key and wait for the RED LED sequence. When they are all on, release
the RESET key. All the LEDs will flash BLUE and the control panel will reconnect to the CLOUD.
Once the App has reconnected to the control panel, it will request insertion of the new password.
RECONFIGURATION OF THE WI-FI NETWORK
To change the Wi-Fi network and/or its password (without losing programming data), keep the Wi-Fi key pressed.
All the RED LEDs will light up. Wait for all the BLUE LEDs to flash and then release the key.
The control panel will start with the private Wi-Fi network active (LARIO-WEB1234XXXX).
Use the LARIO App, click on the “+” button and follow the procedure highlighted by the App to set up the new
Wi-Fi network and reactivate the connection to the CLOUD.
SIM RECONFIGURATION
To replace the SIM card (without losing programming data), keep the Wi-Fi key pressed. All the RED LEDs will
light up. Wait for all the BLUE LEDs to flash and then release the key.
The control panel will start with the private Wi-Fi network active (LARIO-WEB1234XXXX).
Use the LARIO App, click on the “+” button and follow the procedure highlighted by the App to set up the new
SIM and reactivate the connection to the CLOUD.
RESET POSSIBLE FROM APP (Hub menu - Advanced settings)
13. PROCEDURES THAT CAN BE ACTIVATED VIA THE KEYS (RESET & WI-FI) ON THE BOARD
Delete all the users and their passwords
(the installer password is not deleted)
Restarting the control panel without
loss of programming
Fully reset the control
panel (even on the Cloud)
14. SWITCHING OFF THE CONTROL PANEL

9www.lariohub.com LARIO - Installation manual v1.2 EN
PROGRAMMING VIA APP
1. CREATING AN INSTALLER ACCOUNT
When opening the App, click on the “Start” key, choose the procedure and follow the instructions, filling in the
required fields. Save and send the verification e-mail by tapping the green key. Open your e-mail box and confirm
with the appropriate link.
Through this menu it is possible to view,
modify your data and log out.
There is an automatic (security) logout
every hour of inactivity of the App.
Enter the account name.
Attention, the name entered
will subsequently not be
editable.

10www.lariohub.com LARIO - Installation manual v1.2 EN
Once logged in, the Panel List will appear (fig. 2.1). From the Panel List
in addition to viewing the list of control panels in alphabetical order, it
is possible to add new ones and transfer existing ones from one account
to another.
To change the name it is necessary to access the control panel and to
enter the “Hub” menu.
The firmware version of the control panel is indicated under the name.
Reset the installer password with the
appropriate procedure (page 8).
In the Panel List, tap the “Transfer
control panel” key.
A screen will appear with the possibility
of entering the ID code of the control
panel manually or automatically by
framing the QR code present inside the
control panel (fig. 3.2).
You will then be prompted to create a
new installer password.
Use the new password to access control
panel settings.
Add
control panel
Transfer
control panel
fig. 2.1
3. TRANSFER OF CONTROL PANEL TO ANOTHER ACCOUNT
2. INTRODUCTION
fig. 3.2fig. 3.1
It is possible to remove the control panel from the list.
Attention - the control panel is not deleted from the Cloud.
To delete it from the Cloud, it is necessary to perform a
hardware RESET (see page 8).
It is possible to add a short description under the
name of the control panel by tapping this key.

11www.lariohub.com LARIO - Installation manual v1.2 EN
4.1. CONNECTION TO THE CLOUD VIA WI-FI (FIRST CONNECTION)
4. CONNECTION TO THE CLOUD
Power up the control panel and make sure that
the Wi-Fi LED flashes BLUE.
Open the App and tap the “+” key in the Panel
List. A screen describing the procedure will
appear.
Using the phone’s Wi-Fi menu connect to the
Wi-Fi network generated by the Lario control
panel (fig. 4.1.1).
Enter the password (lario123) and connect.
Go back to the App, click on “Wi-Fi set” (fig.
4.1.2) and wait for the available networks to
appear (fig. 4.1.3).
fig. 4.1.1 fig. 4.1.2
fig. 4.1.3
Choose the network to which to connect the control panel, enter the password and confirm with the appropriate
key. If the list does not appear, click on the icon.
Wait for the connection confirmation (fig. 4.1.4). Click on “Setup complete” to connect the control panel to the
Cloud (fig. 4.1.5). Wait for the “Go to cloud” key to appear (fig. 4.1.6) and click it.
fig. 4.1.4 fig. 4.1.5 fig. 4.1.6

12www.lariohub.com LARIO - Installation manual v1.2 EN
fig. 4.1.7 fig. 4.1.8 fig. 4.1.9 fig. 4.1.10
4.2. CONNECTION TO THE CLOUD VIA 4G (FIRST CONNECTION)
Power up the control panel and make sure that
the Wi-Fi LED flashes BLUE.
Open the App and tap the “+” key in the Panel
List. A screen describing the procedure will
appear.
Using the phone’s Wi-Fi menu connect to the
Wi-Fi network generated by the Lario control
panel (fig. 4.2.1).
Enter the password (lario123) and connect.
Go back to the App, click on “Mobile set”
(fig.4.2.2), the screen (fig.4.2.3) will appear
with the name of the mobile operator and the
signal level. If the operator does not appear
automatically select “Manual edit” and enter
the data required for the APN. fig. 4.2.1 fig. 4.2.2
Attention - the control panel contains the main APNs of all countries in the world, however, in
the event that it is not present, it is possible to enter the data manually.
After tapping the “Go to cloud” key, the page with the UID of the control panel is displayed (fig. 4.1.7). Confirm
to continue. A prompt will appear to create the installer password for this control panel (fig. 4.1.8). Immediately
after, the password just created is requested (fig. 4.1.9) to access the programming of the control panel.

13www.lariohub.com LARIO - Installation manual v1.2 EN
fig. 3.5
APN
operator
Select “Priority” to connect to the Cloud via
mobile in priority over the Wi-Fi connection.
fig. 4.2.3 fig. 4.2.4 fig. 4.2.5
fig. 4.2.6
Confirm with the appropriate key and wait for the connection confirmation (fig. 4.2.4).Click on“Setup complete”
to connect the control panel to the Cloud (fig. 4.2.5). Wait for the “Go to cloud” key to appear (fig. 4.2.6) and
click it.
After tapping the “Go to cloud” key, the page with the UID of the control panel is displayed (fig. 4.2.7). Confirm
to continue.There will be a prompt to create the installer password for this control panel (fig. 4.2.8). Immediately
after, the password just created is requested (fig. 4.2.9) to access the programming of the control panel.
fig. 4.2.7 fig. 4.2.8 fig. 4.2.9 fig. 4.2.10

14www.lariohub.com LARIO - Installation manual v1.2 EN
4.3. CONNECTION TO THE CLOUD VIA WI-FI (CONTROL PANEL ALREADY CONNECTED VIA 4G)
fig. 4.3.1
fig. 4.4.1
4.4. CONNECTION TO THE CLOUD VIA 4G (CONTROL PANEL ALREADY CONNECTED VIA WI-FI)
In the event that the control panel is already connected to the Cloud through the
4G carrier, to add the Wi-Fi connection, simply open the advanced "Hub" menu
and enter the data manually (fig. 4.3.1).
It is possible to carry out this operation remotely but it requires careful attention
as if the connection commands were to be changed inadvertently, the control
panel would disconnect from the Cloud and presence on the system would be
required for the new connection.
Restart the control panel to use the new settings.
Once the L 4W module is connected to the LARIO board and the SIM card is
inserted, the control panel automatically programs the connection via mobile in
case of Wi-Fi failure.
If it does not connect automatically, enter the advanced "Hub" menu and
enter the data manually (fig. 4.4.1).
Attention - the 4G module always works as a second carrier with
respect to Wi-Fi unless the "Priority" parameter is set.
It is possible to carry out this operation remotely but it requires careful attention
as if the connection commands were to be changed inadvertently, the control
panel would disconnect from the Cloud and presence on the system would be
required for the new connection.
Restart the control panel to use the new settings.

15www.lariohub.com LARIO - Installation manual v1.2 EN
Clicking on the control panel in the Panel List provides access to the programming home page (fig. 5.2).
Programming is divided into macro menus represented by 8 icons. We recommend that you follow the
programming order in the order indicated. It is important to know that any changes made within the
menus must be confirmed using the appropriate key otherwise it is not sent to the control
panel. LARIO is a dynamic App so many menus
will appear or disappear depending on the previous settings.
5. CONTROL PANEL PROGRAMMING
Hub
Using this menu, it is possible to size
the system in terms of areas, any
partitions, device operation timers
and manage other general system
parameters.
Devices
Through this menu it is possible to
program the devices and test them.
Users
Through this menu it is possible to
create users and associate them to
the various areas.
Scenery
Through this menu it is possible to
program the automatic activations
and deactivations and to associate
the relays of the OUT800 to perform
automations.
Notifications
Through this menu it is possible
to set the PUSH to be sent to the
user App and the SMS relating to
anomalies.
Log Events
Through this menu it is possible to
view the list of events.
CMS
Through this menu it is possible to
set the parameters for sending of the
protocols to the monitoring stations.
Update
Through this menu it is possible
to update, if necessary, the control
panel to the latest firmware version
available.
The Panel List contains the list of control panels associated with the account. To change the name it is necessary
to access the control panel and to enter the “Hub” menu. The firmware version of the control panel is indicated
under the name.
Remove the control panel from the list. Attention - the
control panel is not deleted from the Cloud. To delete it from
It is possible to add a short
description under the name
of the control panel by
tapping this key.
Logout from the control
panel is performed
automatically after
one hour of inactivity
or manually using the
appropriate key in the
figure.
It is possible to move
within the App through the
navigation menu at the top.
the Cloud, it is necessary to
perform a hardware RESET
(see page 8).
fig. 5.1 fig. 5.2

16www.lariohub.com LARIO - Installation manual v1.2 EN
5.1. HUB MENU
Fig. 5.1.1
fig. 5.1.2
Create the name
of the control panel Control panel ID
(uneditable)
Control panel
firmware version
Timezone - the time is
learned automatically from
the App location upon
installation. If the position
of the control panel is
in another Timezone, it
is possible to modify it
manually through the
drop-down menu.
Area name
Insertion of entry
times (max 4 min)
Insertion of exit
times (max 4 min)
Parameter activation
(see fig. 5.1.3)
By activating this
option, all the
detectors associated
with the Stay program
are activated as
instantaneous.
Activation of programs
relating to Area 1
Program name
The manual procedure
is activated to enter the
data of any SIM that
is not automatically
recognised by the
control panel.
Fields in which to enter
data relating to the
unrecognised SIM
N.B. not all operators
require data to be
entered in the 3 fields
Access the advanced
settings (fig. 5.1.2)
Attention - The control panel allows the programming
of 3 completely independent Areas with 3 activation
programs for each Area. The activation programs can be
started one at a time. By default, only the first Area with
the total is activated. It is possible to activate the other
parameters by activating the corresponding flag.
Attention - For eachArea there are entry times and exit times (maximum
4 min). Once the time has been set, for it to work, remember to set
the detector as Delayed Alarm in the Alarm type menu in the Devices
menu (Page 20). The entry time corresponds to the time that elapses
between the violation of the detector with the system activated and
the alarm. The exit time corresponds to the time that elapses between
activation of the system and the time in which the detector is actually
activated.

17www.lariohub.com LARIO - Installation manual v1.2 EN
Enable maintenance
This option activates the control panel maintenance: the sirens, pushes,
SMS and signals to the monitoring station are disabled.
Enable tamper protection
This option activates the hub tamper
Enable wireless saturation
This option turns on the radio saturation. The system generates
an alarm if the radio frequency is saturated for a total time of 30
seconds (even if not continuous) in a one minute window.
Enable EN 50131 rules
This option activates the parameters relating to the standard:
- Entry time and Exit time fixed at 35 seconds
- In the event of an anomaly, the system does not allow activation
of the system until the same is resolved
- It is not possible to exclude the detectors
Enable Wi-Fi
This option activates the Wi-Fi of the control panel.
The Wi-Fi is activated automatically every time the Wi-Fi
reset or the control panel reset is performed.
Enable 3G/4G
This option activates the
4G module (L 4W).
fig. 5.1.5
fig. 5.1.4
fig. 5.1.3
Fields for entering Username and
Password for access to the Cloud from
the User App.
These parameters must correspond to
those that will be entered in the user
App (fig. 5.1.5).
Leaving the fields empty, the factory
parameters will be confirmed:
Username: administrator
Password: admin
Delete all the users and their
passwords (the installer password
is not deleted)
Fully reset the control
panel (even on the Cloud)
Restarting the control panel
without loss of programming

18www.lariohub.com LARIO - Installation manual v1.2 EN
5.2. DEVICES MENU
fig. 5.2.2
fig. 5.2.1
fig. 5.2.3 fig. 5.2.4
device ID
QR code
device ID
code
In this menu it is possible to add devices by selecting the key .
A screen will appear (fig. 5.2.1) in which to enter the device ID in the following 3 ways:
QR code: tapping the QR code will open the phone camera with which to frame the code
present inside the device.
* in the case of CM800mini devices, due
to the small size, there is no “Learn” key.
To proceed with programming in Self Learning,
activate the App in the Self Learning procedure
and then power up the device (the learning code is
sent upon each first power up).
In the case of the CM800 and SS800 devices
there is no “Learn” key. To proceed with
programming in Self Learning, activate the App in
the Self Learning procedure and then power up
the device, close the jumper, wait for the saving
and reopen the jumper.
Attention - do not keep the jumper closed
during use.
In the case of the TR800 there is no “Learn”
key. To proceed with programming in Self
Learning, press the top and bottom on the left
keys or top and bottom on the right keys at the
same time.
Manual entry of the ID code: on the label inside the device to be programmed is the ID code to be entered
in the appropriate area. Confirm after entering.
Self Learning*: tapping the Self Learning key (fig. 5.2.1) the application goes into a device standby
state (fig. 5.2.2). Tap the “Learn” key on the electronic board of each device to be programmed (except for the
CM800mini, CM800, SS800, TR800). In fig. 5.2.3, by tapping “Test zones” it will be possible to activate a test
of all the programmed devices. To activate the test press on “Start”.
Attention - once the device has been learned, it is advisable
to proceed with its test (especially in the case of manual
insertion of the ID code) and only then begin its programming.

19www.lariohub.com LARIO - Installation manual v1.2 EN
REMOTE CONTROL (TR800)
Radio signal level
Battery level
Activation key
device single Test
Possibility to change
the device name
Attention - a user must always be
associated with the remote control
Assigning of the device to the Areas
programmed in the control panel
Panic activation from remote control. Holding down the two green keys at
the same time will activate the sirens (noisy panic).
Holding down the two grey keys at the same time, a PUSH will be sent to
the user App or an SMS (silent panic). To send the silent panic, the PUSH or
SMS Alarms must be activated.
Device name
Device ID
fig. 5.2.5
fig. 5.2.6
Access the advanced
settings
Advanced settings (fig. 5.2.6)
Each key on the remote control can be assigned a different function.
By default:
Key 1 - activation of Program 1
Key 2 - deactivation of Program 1
Confirm the changes made
Delete the device
Open the remote control via the dedicated screw on the back. Remove the protective plastic in the battery
compartment. Once the learning procedure and relative test have been completed, it is now possible to program
the device through the App (fig. 5.2.5). A remote control can be associated with a single Area.
Attention -Whenever programming is changed via theApp, the remote control must be transmitted
(press any key) at least once to learn the changes.
Test
By tapping the key on the remote
control, the light becomes green if
the test is successful