American DJ PDP-900 User manual

American DJ® LOS ANGELES, CA. 90058
Model: PDP-900™
SPECIFICATIONS:
Protection: 20A breaker
Power: 110V/60Hz
Weight: 7 lbs.
Size: 19” x 6.75” x 1.75”
19 in. single space rack mount.
Thank you for purchasing this
American DJ® product. For your
convenience this products ready to
be used, there is no assembly
required. Please read the following
instructions before installing or
using your new unit.
Operating Instructions:
The American DJ® PDP-900™ protects your
equipment from voltage serges! A power surge &
spike protector, with A/C filter for unwanted RFI
noise. With special feature: digital voltage
meter. The PDP-900™ also features 7 protected
switched A/C grounded outlets on rear of unit, & 1
A/C unswitched outlet on rear of unit, 1 A/C outlet
switched on front of panel, 15 amps per outlet/20A
protection breaker button on front panel, master
on/off switch, and dual pop-out lights with dim
control knob; great for lighting up DJ control
booths. The PDP-900™ eliminates wires in
mobile racks, control booths, or studios. For night
club, studios, and mobile DJ’s where power
distribution is a concern. Single space19 inch rack
mount.
NOTICE: When pop-up lights are not in use
make sure dim control knob is all the way off.
For service, contact your American DJ® dealer.
Caution! Always disconnect from main
power before replacing lamps or servicing unit.
Remember to always replace with same lamps
and fuses.
American DJ ®
User
Instructions
PDP-900™