American Dryer GX1-M User manual

HEAVY DUTY ONE-PIECE COVER OPTIONS
Flame retardant white ABS
Steel with white epoxy finish (M)
Steel with black graphite epoxy finish (BG)
Steel with satin chrome finish (C)
TAMPER RESISTANT – Tamper resistant screws
secure cover to base. Air intake vents are shielded
for additional safety.
MOTOR – Permanently lubricated,
maintenance-free, brushless induction motor with
automatic resetting thermal protector. 1/12HP,
3100 RPM.
AUTOMATIC SENSOR – RoHS compliant lead-free
design. Microprocessor controlled infrared sensor
turns dryer on when hands are under the outlet for
up to 80 seconds.
HEATING ELEMENT – Constructed of NiChrome
resistance wire with automatic resetting
thermostat. Heating element operates in the
black range for maximum life.
construction features:
THE GX SERIES AUTOMATIC HAND DRYERS PROVIDE A
QUIET AND COMPACT DESIGN TO FIT ANY BUDGET.
OVERVIEW:
AIR VELOCITY
AIR TEMP
DIMENSIONS SURFACE
MOUNTING HEIGHTS
130˚F at 72˚F Ambient
10-1/8” W x 9-3/8” H x 5 -5/8” D
SOUND LEVEL 63 dB (Quietest in its class)
specifications GX
WARRANTY:
5-year limited warranty GX-M/C. 3 -year limited warranty GX.
Includes same day factory repair or part replacement.
See owner’s manual for details.
(From floor to bottom
of hand dryer)
Men 44”
Women 42”
Children 32”- 42”
Handicapped 36”
AIR FLOW 130 CFM (Cubic Feet per Min.)
4500 LFM (Linear Feet per Min.)
MODEL ELECTRICAL RATINGS
model reference chart
Recessed Mounting is available by designating (R)
after model no. or order kit separately. See accessories chart
ABS
White
GX1
GX3
GX1-C
GX3-C
Steel
Chrome
GX1-M
GX3-M
Steel
White
110-120
208-240
Volts Amps Watts Hertz
12
6
50 /60
50 /60
1500
1500
GX1-BG
GX3-BG
Black
Graphite
A RECESS KIT is available to
reduce the depth of the dryer
to less than 4” from the surface
of the wallon all models. GX-MR
Recessed Mount
LESS
THAN
4”
FROM
WALL
OVERVIEW:
GX model reference chart
GLOBAL®GX
Maintenance free
Quiet,
dependable
operation
Vandal resistant
Exceptional
value & reliability
Up to 5 year
limited warranty
www.americandryer.com
Series SPECIFICATIONS
GX Series White GX-C Series Chrome
GX-BG Series Black Graphite
AP
SG
Universal adapter plate for all surface models. Stainless.
Stainless steel splash guard for all models. 14”H x 16”W.
Cover Material and Finish
Flame retardant white ABS
Steel with white epoxy finish
GXT Series
10-12 sec
800-1500 W
GXT9
GXT9-M
Steel with satin chrome finish
Stainless steel with brushed finish
EXT Series
12-15 sec
300-540 W
GXT9-C
GXT9-SS
EXT7
EXT7-M
EXT7-C
EXT7-SS
All models: 100-240 V, 50/60 Hz
Recessed Mounting is available by designating (R)after model no.
or order kit separately -see pn ADA-W or ADA-SS on accesories chart.
ADA-SS Stainless steel recess kit for (BG), (C), (SS) models
ADA-W White recess kit for all white models
AccessoriesP/N

DRYER PLACEMENT :
Dryers should be placed at least 2 feet apart and at least 12” from
washbasin. Do not install dryer over washbasin. Automatic dryers should
be at least 18” above any projection which may interfere with the
operation of the automatic sensor.
DRYER INSTALLATION:
Hand dryers require a dedicated circuit (max. 20 amp) and must be
properly grounded. One side of dryer should be mounted to a stud.
All surface mount dryers are provided with conduit entrances for both
between wall and surface wiring.
QUANTITY ESTIMATE, HAND DRYER:
Average traffic washroom..............1 dryer per 2 washbasins
Heavy traffic washroom..................1 dryer per washbasin
54” wash fountain...........................4 dryers per sink
Represented by:
American Dryer, Inc.
33067 Industrial Road ILivonia, MI 48150 IU.S.A.
Toll Free 800.485.7003 U.S. IPh: 734.421.2400 IFax 734.421.5580
Web: www.americandryer.com
Email: [e-mail]
© American Dryer, Inc. All Rights Reserved
Revised November 2011
GENERAL INFORMATION
8-15/16
(227mm)
7/16
(11mm)
5-5/8
(143mm)
8-7/16
(214mm)
7/16
(11mm)
9-13/16
(249mm)
8-3/16
(208mm)
7/8 (22mm) DIA. IN-WALL
& SURFACE CONDUIT
ENTRANCES
9 1/16
(230mm)
1-7/8 (48mm)
MOUNTING HOLES FOR
1/4 (M6) DIA. SCREWS
Figure 1 - GXSeries Surface Mount
FRAME INSIDE
ROUGH OPENING ROUGH WALL
OPENING
1 (25mm)
CONDUIT
ENT.
9-7/8
(251mm)
12-3/16
(310mm)
FINISHED WALL
2 (51mm) DEPTH OF BOX
TRIM PIECE
12-3/4 W X 11-7/8 H
(324mm X 302mm)
9-5/8 (245mm)
2-5/16 (58mm)
4
(102mm)
Figure 2 - GX-MR Series Recessed Mount
“Our school saved over $21,000
last year with American Dryer!”
SAVE 95% VERSUS PAPER TOWELS
GX Series Hand dryers achieve up to a 95% cost savings over
paper towels. These savings are realized by eliminating the
maintenance and operating expenses associated with paper or
linen towels.
GX SERIES MOUNTING DIAGRAMS
Printed on Recycled Paper
®
USC MADE IN U.S.A.
SHIPPING WEIGHT: GX 8 lbs, GX-M/BG/C 10 lbs
COST ANALYSIS FOR A PUBLIC SCHOOL
Paper Towel Usage 800 CASES
11 MONTHS
Total Paper Costs $24,000
Hand Dryer Operating Costs $2,453
Payback Time
ANNUAL SAVINGS $21,547
COST ANALYSIS FOR A RESTAURANT
Paper Towel Usage 90 CASES
12 MONTHS
Total Paper Costs $2,025
Hand Dryer Operating Costs $96
Payback Time
ANNUAL SAVINGS $1,929