American International TOYK9714 User manual

CU TOMER HELP LINE
U A 800-323-4329
TOYK9714 Mounting Kit
Toyota
2016 TACOMA
VEHICLE APPLICATION
©2016 AMERICAN INTERNATIONAL IND STRIES, INC. TECH Ver. 02/16 PRINT Ver. 02/16
iTOYK9714
WWW.AIU .NET
2500 Eas Francis S ree On ario, CA 91761, U.S.A.
USA Sales [phone]

1. sing a soft tool unsnap and remove the panel surrounding the radio,
including the air vents..
2. From the OEM radio brackets remove (4) 10mm bolts. Remove Radio.
nplug all harnesses and antenna connections.
DA H DI A EMBLY IN TRUCTION DOUBLE DIN IN TALLATION IN TRUCTION
2 3
Fig B
Fig A
Remove shaded tabs
on left and right sides
of the brackets
(Right side not shown)
KIT A EMBLY IN TRUCTION
1. Insert pocket into lower section of the brackets and snap into rear pocket
support tabs.
2. Install brackets to rear of main frame using the (6) screws provided.
3. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
4. sing the main frame of the as a guide, slide radio forward or backward
for desired look and then tighten screws to the radio.
NOTE: Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio. Suggested.
ingle I O Mount Applications
Double DIN Mount Applications
ee Fig B for bracket tab removal.
1. Install brackets to rear of main frame using the (6) screws provided.
2. Insert ISO mountable radio between ISO mount brackets and loosely attach to
sides of radio using screws provided with radio when possible,
or screws supplied with kit.
3. sing the main frame of the as a guide, slide radio forward or backward
for desired look and then tighten screws to the radio.
NOTE: Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio. Suggested.
You will only use one main frame.
For models with the 7" screen use
the TOYK974 for models with the
6" screen use the TOYK971.
You will only use one main frame.
For models with the 7" screen use
the TOYK974 for models with the
6" screen use the TOYK971.