American Legend KIRKWOOD AL1010W/F User manual

© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
1
All Rights Reserved.
1-888-996-2729
FAX: [phone]
We strive to ensure that our products are of the highest quality
and free of manufacturing defects or missing parts. However, if
you have any problems with your new product,
DO NOT RETURN IT TO THE STORE,
please contact us toll free @:
Or write to:
Escalade Sports
Customer Service Department
P.O. Box 889
Evansville IN 47706
Your Model Number ____________________
have your model number when inquiring about parts.
[email protected]
Please
Date Code ___________________________
2 - AL1010W- - SY
When contacting Escalade Sports please provide your model number, date
code (if applicable) and part number if requesting a replacement part. These
numbers are located on the product, packaging, and this owners manual.
Purchase Date ________________________
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
AL1010W/F

Make sure you understand the following tips before you begin to assemble your hockey table.
1. Start all bolts by hand before tightening.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
TWO ADULTS ARE REQUIRED TO ASSEMBLE
Assembly Tips
Tools Required:
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO ASSEMBLE THIS TABLE.
Socket Head Wrench (Included)
Furniture Polish and Cloth
ATTENTION:
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
2
All Rights Reserved.
THIS 84'' KIRKWOOD AIR HOCKEY TABLE
Small Phillips Screw Driver to Install Batteries In the Battery Box
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.

P1 - Main Cabinet
(1 pc)
H1 - 8mm x 130mm Hex Head Bolt
(8 pcs)
H2 - 8mm x 40mm
Hex Head Bolt
(20 pcs)
H3 - M8 Flat Washer
(28 pcs)
H4 - M8 Lock Washer
(28 pcs)
P2 - Leg Base
(2 pcs)
P3 - Middle Leg
(2 pcs)
P4 - Upper Leg
(2 pcs)
P5 - Bottom Leg
(2 pcs)
（Not to Scale)
PARTS IDENTIFIER
(Not to Scale)
HARDWARE IDENTIFIER
(To Scale)
T1 - Socket Head Wrench
(1 pc)
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
3
All Rights Reserved.

ACCESSORIES IDENTIFIER
(Not to Scale)
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
4
All Rights Reserved.
Assembly Note:
In the following Steps 1 , 2 , & 3 , please exercise patience when starting all H1 & H2
bolts . Be sure to align bolts straight with their respective holes . Be careful not to
cross thread .
Do not push on the bolts while trying to get the bolts to start as you could accidently
push the inner T-Nut out of it fixed position .
A1 - Striker
(2 pcs)
A2 - Puck
(2 pcs)
A3 - Felt Pad
(2 pcs)
NOTE: A3 Felt Pads may already
be attached to A1 Strikers
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation."
"CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment."

PARTS REQUIRED
12pcs - H2 Hex Head Bolt
12pcs - H4 Lock Washer
12pcs - H3 Flat Washer2pcs - P3 Middle Leg
2pcs - P4 Upper Leg
1pc - P1 Main Cabinet
PARTS REQUIRED
8pcs - H1 Hex Head Bolt 8pcs - H4 Lock Washer
8pcs - H3 Flat Washer
2pcs - P5 Bottom Leg
STEP 1
Attach the P4 Upper Leg, P3 Middle Leg onto the P1 Main Cabinet
using the H2 Hex Head Bolts,H3 Flat Washers and H4 Lock
Washers as shown in FIGURE 1.
Attach the P5 Bottom Leg onto the P3
Middle Leg using the H1 Hex Head
Bolts,H3 Flat Washers and H4 Lock
Washers as shown in FIGURE 2.
STEP 2
Attach the P4 Upper Leg with P3 Middle Leg using the H1 Hex
Head Bolts,H3 Flat Washers and H4 Lock Washers as shown in
FIGURE 2.
FIGURE 1
FIGURE 2
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
5
All Rights Reserved.
H2
H4
H3
P3
P4
P3
H2 H3
H3
H4
H2 H3
H4
H2
H4
P1
P4
H1
H4
H3
H3
P5
P3
H1
H4
All edges must be
assembled “FLUSH”
with each other.
All edges must be
assembled “FLUSH”
with each other.
Do not tighten H2 bolts at this time. Tighten
when K-leg assembly is completed.
Do not tighten H3 bolts at this
time. Tighten when K-leg
assembly is completed.

PARTS REQUIRED
8pcs - H2 Hex Head Bolt 8pcs - H4 Lock Washer
8pcs - H3 Flat Washer2pcs - P2 Leg Base
Attach the P2 Leg Base onto the P3 Middle Leg and P5 Bottom
Leg using the H2 Hex Head Bolts,H3 Flat Washers and H4 Lock
Washers as shown in FIGURE 3.
FIGURE 3
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
THIS STEP REQUIRES FOUR OR MORE ADULTS.
WHILE FLIPPING THE TABLE OVER, DO NOT ALLOW TABLE
TO REST ON THE SIDE OF LEGS AS THIS COULD DAMAGE THEM.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
HOLD TABLE
CABINET DO NOT
HOLD THE
LEGS
DO NOT LEAN THE
TABLE ON ITS LEGS!
STEP 3
P5
P5
P2
H2
H4
H3
H2
H4
H3
H2
H2
H4
H4
H3
H3
P3
P2
Tighten all leg bolts now using the T1
Socket Head Wrench-tight.

© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
7
All Rights Reserved.
C3
C4
C5
C1
C2
ELECTRONIC CONNECTIONS
C5. Scorer
C6. Blower with A/C Cord
C3. Control Box
C4. Battery Box
C1. Sensor with
Short Wire
C2.Sensor with
Long Wire
NOTE:
ON/OFF switch is attached to the air
fan motor cord. Be sure to always turn
fan motor off when play is completed.
IMPORTANT:
Plug into wall outlet.
Do not allow cord to be a trip hazard.

© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
8
All Rights Reserved.
LED SCORING OPERATING

© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
9
All Rights Reserved.
ELBATRUOYFOESUDNAERAC
eraCehtetonesaelP.elbatruoydelbmessawonevahuoY!snoitalutargnoC
and Use instructions below to insure many years of trouble free use of your game
.elbat
Description Qty.
H1
H2
H3
H4
T1
P1
P2
P3
P4
P5
Key # Part #
PRODUCT PARTS LIST FOR MODEL # AL1010W/F
8mm x 130mm Hex Head Bolt
8 mm x 40 mm Hex Head Bolt
M8 Flat Washer
M8 Lock Washer
Socket Head Wrench
Main Cabinet
Leg Baseplate
Middle Leg
Upper Leg
Bottom Leg
8
20
28
28
1
1
2
2
2
2
AL1010STXH1
AL1010STXH2
AL1010STXH3
AL1010STXH4
AL1010STXT1
AL1010STXP1
AL1010STXP2
AL1010STXP3
AL1010STXP4
AL1010STXP5
A1
A2
A3
AL1010STXA1
AL1010STXA2
AL1010STXA3
Striker
Puck
Felt Pad (may be attached )
K1
M1
AL1010STXK1
AL1010STXM1
Hardware Kit
Owner's Manual
2
2
2
C1 AL1010STXC1 Sensor with Short Wire 1
C2 AL1010STXC2 Sensor with Long Wire 1
C3 AL1010STXC3 Control Box 1
C4 AL1010STXC4 Battery Box 1
C5 AL1010STXC5 Scorer 1
C6 AL1010STXC6 Blower with A/C Cord 1
C7 AL1010STXC7 Corner Cap 1
1
1
1. Use spray furniture polish to clean all exterior surfaces of your table and on the
2.
3. This product is intended for INDOOR use only.
4. DO NOT sit, climb or lean on the table.
5. DO NOT drag the table when moving it. This will damage the legs.
6. DO NOT set drinks on the table.
7. The purchase of a table cover will both protect and help keep clean the entire
top of the table.
Use only a suitable 120v AC household outlet, and insure the cord is not a trip hazard.
playfield with the air motor running.

This customer warranty extends to the original owner, on the purchase of any ESCALADE SPORTS
Product (hereinafter referred as the "Product").
This Product is warranted to the original owner, for a period of 90 days from the
original purchase.
ESCALADE SPORTS warrants to the original owner, this product to be free
from defects in material and workmanship when used for the intended purpose under normal use and
conditions. THIS WARRANTY IS VOID IF THE PRODUCT HAS BEEN DAMAGED BY ACCIDENT,
UNREASONABLE USE, NEGLIGENCE, IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS
PROVIDED WITH THE PRODUCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL
AND WORKMANSHIP.
During the above 90 day warranty period, ESCALADE SPORTS shall
provide replacement components or replace with a comparable product at our choosing. If product is
defective under normal use and proper care, please contact our Customer Service Dept.
Other than shipping requirements no charge will be made for such replacement of in-warranty Products.
Some states do not allow the exclusion or limitation of implied warranties or consequential or incidental
damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which
may vary from state to state.
WARRANTY DURATION:
WARRANTY COVERAGE:
WARRANTY REPLACEMENT:
LEGAL REMEDIES:
1-888-996-2729 / Customer Service Dept.
Or Write us at:
Escalade® Sports, Inc. - P.O. Box 889, Evansville, IN 47706
Attn: Customer Service Dept.
Or E-mail us at:
[email protected]
ANY IMPLIED WARRANTIES ARISING OUT OF THIS SALE,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE
ABOVE 90 DAY PERIOD. ESCALADE SPORTS SHALL NOT BE LIABLE FOR LOSS OF
USE OF THE PRODUCT OR OTHER CONSEQUENTIAL OR INCIDENTAL COSTS,
EXPENSES OR DAMAGES INCURRED BY THE CONSUMER OF ANY OTHER USE.
WARRANTY DISCLAIMERS:
90 DAY LIMITED WARRANTY
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
10
All Rights Reserved.