American muscle 94365 User manual

Center Console Arm Rest Pad Titanium Gray (87-93 All)
Install Time: Approximately 5 min
Tools Required: Phillips Screwdriver
Removal Procedure:
Step 1: Start by opening the center console arm
rest.

Step 2: Next taking the Phillips screwdriver unscrew the screws holding the
armrest pad onto the trim and Armrest bracket, There should be 4 total.
Step 3: Once removed the arm rest pad and trim should be free to pull off the
bracket.
Installation Procedure:
Step 1: Take your new arm rest pad and align
it with the trim.
Step 2: Once aligned Screw in the two top
screws about half way so the pad can move
around on the trim.
Step 3: Take the pad and trim and align it with
the console bracket, The bracket should slide
between the Arm rest pad and the trim.

Step 4: After bottom holes are lined up take the
two remaining screws and screw them in, Not to
tight remember it is plastic, and finish
tightening the two top screws.
Step 5: Enjoy your new Arm rest pad
Installation Instructions written by AmericanMuscle Customer Vance Clark 8.17.2014