American muscle CH3215 User manual

Step 1:
Using a trim panel removal tool, carefully pry between the
front sidemarker light and the bumper to release the clip.
Slide the sidemarker light out to remove from the bumper.
Step 3:
Connect the factory sidemarker connector into the new
light, and push in the red tab to secure.
Installation Instructions for 2015-2018 Challenger Front LED Sidemarker Lights
Step 2:
Unlock the red retaining clip, press and release the factory
wiring connector from the factory light.
Step 4:
Insert the locating tab into the bumper, and then carefully
press the light until it clicks into place securing it to the
bumper.
CH3215
CH3216

Installation Instructions for 2015-2018 Challenger Rear LED Sidemarker Lights
Step 1:
Using a trim panel removal tool, carefully pry between the
rear sidemarker light and the bumper to release the clip.
Slide the sidemarker light out to remove from the bumper.
Step 3:
Connect the factory sidemarker connector into the new
light, and push in the red tab to secure.
Step 2:
Unlock the red retaining clip, press and release the factory
wiring connector from the factory light.
Step 4:
Insert the locating tab into the bumper, and then carefully
press the light until it clicks into place securing it to the
bumper.
Towards Front of
Vehicle
Towards Rear of
Vehicle