American Standard Colony Right Height Elongated 12" Rough-In Toilet... User manual

K90
© 2008 AS America Inc.
COLONY™ RIGHT HEIGHT™
ELONGATED 12" ROUGH-IN TOILET
VITREOUS CHINA
COLONY™ RIGHT HEIGHT™ ELONGATED
12" ROUGH-IN TOILET
❑ 2359.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 16-1/2" rim height for accessible applications
• Elongated siphon action jetted bowl
• AquaForce ushing technology
• Fully glazed 2" trapway
• American Standard Aquameter™ Water Control
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory ush tested
❑ 3370.016 Bowl
❑ 4392.016 Tank
Nominal Dimensions:
756 x 508 x 781mm
(29-3/4" x 20" x 30-3/4")
Fixture only, seat and supply by others
Alternate Tank Congurations Available:
❑ 4392.500 Tank complete with Aquaguard Liner
❑ 4392.800 Tank complete with trip lever located
on right side
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
305mm
(12)
756mm
(29-3/4)
C/L OF OUTLET
76mm
(3-1/4)
FINISHED WALL
229mm
(9)
19mm ± 6mm
(3/4 ± 1/4)
419mm
(16-1/2)
470mm
(18-1/2)
C/L
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
311mm
(12-1/4)
178mm
(7)
16mm
(5/8)
FINISHED
FLOOR
781mm
(30-3/4)
235mm
(9-1/4)
152mm
(6)
508mm
(20)
203mm
(8)
SUPPLY
AS
REQ'D
375mm
(14-3/4)
*
To Be Specied:
❏ Color: ❏ White
❏ Seat: American Standard #5324.019 “Rise and
Shine” solid plastic closed front seat with cover.
❏ Seat: American Standard #5311.012 “Laurel”
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
Revised 2/08