American Standard Connoisseur 4600.100 User manual

SINGLE CONTROL KITCHEN COMBI FAUCET
MODEL NUMBER:
4600.100 Kitchen Combi Faucet
Combi body with spray and hose. Escutcheon plate (use is
optional).
PRODUCT FEATURES:
Brass and Copper Waterway: Highest quality materials for
durability & long life.
Memory Postion Valving: Allows user to turn valve on and
off at preferred temperature setting without readjusting handle
position each time.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Ceramic Disc Valve Cartridge: Assures smooth, precise
valve control and a lifetime of drip-free, maintenance-free
performance.
Integral Check Valves: Prevents back flow.
Pull-out Spray Spout: Switches water flow from a stream to a
spray. Simplifies even the most difficult cleaning tasks.
Choice of Finishes: Wide range of durable finishes.
SUGGESTED SPECIFICATION:
Single control kitchen combi faucet shall feature a cast brass body with pull-out spray spout with two check valves. Shall also
feature washerless ceramic disc valve cartridge. Fitting shall be American Standard Model # 4600.100.____
GENERAL DESCRIPTION:
Cast brass body with stamped brass escutcheon. Pull-out
swing spray spout. Hose is 4'10" long. Washerless 47mm
ceramic disc valve cartridge. 3/8" O.D. copper supplies.
Complete with two integral check valves. 2.2 gpm/8.3L/min.
maximum flow rate. Fitting can be mounted with or without
supplied escutcheon plate (escutcheon size 10-7/8"L x 2-
1/2"W).
4600.100 Shown.
203mm
(8)
127mm
(5)
276mm
(10-7/8)
35 to 38mm
(1-3/8 to 1-1/2)
DIA. MOUNTING
HOLE
51mm
(2) MAX.
235mm
(9-1/4)
127mm
(5)
178mm
(7)

SINGLE CONTROL KITCHEN COMBI FAUCET
4600.100 Combi body with spray and hose.
3/8" copper inlets.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B125
Product
Number Description
Finish Options
Polished
Chrome
002 099
PVD
Polished
Brass
072
PVD
Black
Nickel
295
PVD
Satin
208
White
Heat
299
Chrome
Body/
Brass
Spray
Bone
021
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020