American Standard Huron 4' Recess Bath 0131.012 User manual

H164
© 2008 AS America Inc.
NOTES:
0133.017 LEFT HAND OUTLET (SHOWN).
0131.012 RIGHT HAND OUTLET (REVERSE DIMENSIONS).
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH FOR
ADDITIONAL INFORMATION.
SHOWN WITH POP-UP C.D. & O.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
CONCEALED PIPING NOT INCLUDED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4. These measurements
are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaet.
To Be Specied:
❏ Color:
❏ Bath Faucet*:
❏ Faucet Finish:
❏ Drain:
* See faucet section for additional models available
HURON™ 4'
RECESS BATH
ENAMELED STEEL
HURON™ 4' RECESS BATH
❏ 0131.012 Right hand outlet
❏ 0133.017 Left hand outlet
Product Features:
• Acid resisting, enameled steel construction
• One-piece recess bath
• Integral apron
• End drain outlet
• Full slip-resistant surface
• Straight tiling ange
Nominal Dimensions:
1181 x 686 x 394mm
(46-1/2" x 27" x 15-1/2")
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.4 for Enameled Steel Plumbing
Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
Revised 2/08
OPTIONAL TO FINISHED FLOOR
(USUALLY BETWEEN 1651mm (65)
& 1981mm (78)
FINISHED
WALL
C/L OF
VALVE
305mm
(12)
67 mm
(2-5/8)
C/L OF
SPOUT
102mm
(4)
25mm
(1)
394mm
(15-1/2)
ROUGH
FLOOR
1181mm
(46-1/2)
19mm
(3/4)
19mm
(3/4)
SEE FITTING SPECS.
FOR DIMENSION
191mm
(7-1/2)
229mmx305mm
(9x12) FLOOR
CUTOUT FOR
DRAIN
C/L OF
SUPPLIES
22mm
(7/8)
C/L OF DRAIN OUTLET
104mm
(4-1/16)
51mm
(2)
327mm
(12-7/8)
686mm
(27)
19mm
(3/4)
PLUMBER NOTE –
PROVIDE SUITABLE SUPPORT AT THIS POINT
C/L OF
SHOWER ARM
FINISHED
WALL
38mm
(1-1/2)
1-1/2 O.D.
TAILPIECE
1-1/2 N.P.T.
THREADS
76mm
(3)