American Standard Roxalyn 00194.225 User manual

M15
© 2008 AS America Inc.
ROXALYN™
WALL-HUNG LAVATORY
VITREOUS CHINA
0194.225 EXPOSED BRACKET SUPPORT VARIATION
FINISHED
WALL 222mm
(8-3/4)
FINISHED
FLOOR
457mm
(18)
222mm
(8-3/4)
406mm
(16)
29mm
(1-1/8)
508mm
(20)
13mm x 51mm BRACKET
(1/2 x 2) SLOTS
51mm (2)
SUGGESTED
787mm
(31)
C/L
121mm
(4-3/4)
86mm
(3-3/8)
35mm (1-3/8)
DIA. PUNCHING
0194.092 CONCEALED ARMS SUPPORT VARIATION
FINISHED
WALL 222mm
(8-3/4)
102mm
(4)
FINISHED
FLOOR
1-1/4 O.D.
TAILPIECE
1-1/4 O.D.
WASTE
203mm
(8)
178mm
(7)
273mm
(10-3/4)
SUPPLIES
AS REQ'D.
457mm
(18)
222mm
(8-3/4)
51mm(2)
419mm
(16-1/2)
51mm (2)
SUGGESTED
86mm
(3-3/8)
419mm
(16-1/2)
*
*
787mm
(31)
C/L
121mm
(4-3/4)
(6) 25mm (1) DIA.
ACCESS HOLES
35mm (1-3/8)
DIA. PUNCHING
178mm
(7)
178mm
(7)
44mm(1-3/4)
54mm(2-1/8) DIA.HOLES
FOR CONCEALED ARMS
508mm
(20)
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP
ARE SUGGESTED.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
CONCEALED ARMS SUPPORT & EXPOSED BRACKET SUPPORT TO BE
FURNISHED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
Revised 8/05