American Telecom 6001S User manual

User’s Manual
for
American Telecom 6001S
for use with
Service by SunRocket
6001S
Compatible only with SunRocket Service
Expandable, Digital Cordless
Internet Telephone
To enjoy all the benefits of this product, please review
the information contained in this manual.

2
TABLE OF CONTENTS
Important Safety Instructions ...........................................................................................3
Safety Instructions for Handset Battery Pack....................................................................3
FCC Statement.................................................................................................................4
Package Includes (Parts List) ...........................................................................................4
Handset and Base Layouts ...............................................................................................5
LCD Display....................................................................................................................6
Getting Started.................................................................................................................7
Basic Operation ...............................................................................................................9
Answering Calls.......................................................................................................9
Making Calls.......................................................................................................... 11
Call Waiting / Call Waiting ID .......................................................................................12
Conference Calls............................................................................................................12
Redial ............................................................................................................................12
Muting the Handset Microphone....................................................................................13
Page...............................................................................................................................13
Using the ‘Hands-Free’ Handset Speakerphone..............................................................13
Special Service Keys......................................................................................................13
Voice Mail .....................................................................................................................13
Intercom ........................................................................................................................14
Handset Menu and Programming ...................................................................................14
Caller ID Call Log .........................................................................................................15
Phone Book ...................................................................................................................16
Volume ..........................................................................................................................19
Ring Volume..................................................................................................................19
Ring Pattern...................................................................................................................20
Auto Answer..................................................................................................................20
Key Click.......................................................................................................................20
Key Lock.......................................................................................................................21
Handset Naming ............................................................................................................21
Language .......................................................................................................................22
Message Waiting............................................................................................................22
VOIP Settings ................................................................................................................23
Base Unit Status Indication............................................................................................23
Handset Status Indication...............................................................................................23
Display Messages ..........................................................................................................23
LED Indication – Handset Antenna................................................................................25
Audible Alerts................................................................................................................25
Auto Registration of Expansion Handset with the Base..................................................25
Troubleshooting.............................................................................................................25
Consumer Information ...................................................................................................26
Limited Warranty...........................................................................................................26

3
Important Safety Instructions
BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK AND INJURY TO PERSON, INCLUDING THE FOLLOWING
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
3. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
4. Do not place this product on an unstable cart, stand, or table. The product may fall, causing
serious damage to the product.
5. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
protect it from overheating, these openings must not be blocked or covered. The openings should
never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This
product should never be placed near or over a radiator or heat register. This product should not
be placed in a built-in installation unless proper ventilation is provided.
6. This product should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your dealer or local
power company.
7. Do not allow anything to rest on the power cord. Do not locate this product where the cord will
be damaged by persons walking on it.
8. Do not overload wall outlet extension cords, as this can result in the risk of fire or electric shock.
9. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
Never spill liquid of any kind on this product.
10. To reduce the risk of electric shock, do not disassemble this product. Instead, when some repair
work is required, take the unit to a qualified technician. Opening or removing covers may
expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
11. Unplug this product from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions because improper adjustment of
other controls may result in damage and will often require extensive work by a qualified
technician to restore the product to normal operation.
e. If the product has been dropped or cabinet has be damaged.
f. If the product exhibits a distinct change in performance.
12. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a
remote risk of electrical shock from lightning.
13. Do not use the telephone to report a gas leak in the vicinity of the leak.
14. This power unit is intended to be correctly oriented in a vertical or floor mount position.
SAVE THESE INSTRUCTIONS
Safety Instructions for Handset Battery Pack
CAUTION:
There is a danger of explosion if the battery is incorrectly replaced. Use only an approved battery pack in
the handset of your 6001S Cordless Telephone. To reduce the risk of fire or injury, always do the following
when replacing, discarding, or charging battery, when handling the batteries, be careful not to short the
battery with conducting materials such as rings, bracelets, and keys. The Battery or conducting material
may overheat and cause burns. Use only the following type and size of battery pack:

4
FOR HANDSET UNIT:
GP60AAAH3BMX 3.6V 600mAh GPI INTERNATIONAL LIMITED
CONTAINS NICKEL-METAL HYDRIDE BATTERY. BATTERY
MUST BE RECYCLED OR DISPOSED OF PROPERLY
1. Do not dispose of the battery in a fire. The cell may explode. Check with
local codes for possible special disposal instructions.
2. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to
the eyes or skin. It may be toxic if swallowed.
3. Exercise care in handling batteries in order not to short the battery with conducting materials
such as rings, bracelets and keys. The battery or conductor may overheat and cause burns.
4. Charge the batteries provided with or identified for use with this product only in accordance
with the instructions and limitations specified in this manual.
5. Observe proper polarity orientation between the battery(ies) and battery charger.
6. Do not mix old and new batteries in this product.
7. Do not mix batteries of different sizes or from different manufacturers in this product.
SAVE THESE INSTRUCTIONS
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Package Includes (Parts List)
•Master Base
•Handset
•Ethernet cable
•2 colored accent plates (in addition to 1 accent plate fastened to the handset)
•Wall Mount
•Belt Clip
•Battery pack
•Power adapter
•Desk-stand bracket
•Insert Card
•Small Insert Card
•User Manual
•Quick Start Information Sheet
•Warranty Form
•Privacy Disclaimer
•How to activate SunRocket Long Distance service

5
Handset and Base Layouts
1
2
5
3
4
6
7
8
11
12
9
13
14
15
10
16
1 Key pad (0-9; *; #) 9 Message Waiting Indicator (LED)
2 Start/End Calls 10 Cancel
3 Clear/Delete 11 Volume _/ Scroll _
4 Flash/Speakerphone 12 Intercom
5 Voice Mail 13 Redial/Pause
6 Program 14 Repeat Dial
7 Volume _ / Scroll _ 15 Directory Info.
8 Display (LCD) 16 Last Call Return

6
17 Message Waiting/In Use Indicator 19 Page Handset
18 Charge Indicator
LCD Display

7
1. Caller ID Time
2. Caller ID Date
3. Ringer OFF icon (displayed when user turns the ringer off)
4. Low battery icon (displayed only if battery voltage is low)
5. Key lock icon (displayed when user locks the keypad)
6. In Service icon (displayed when handset is ‘in range’ of the base)
7. Off Hook icon (displayed when handset is on an external or intercom call)
8. NEW icon (displayed when new Caller ID records have been received)
Getting Started
Install and Charge the Battery Pack
1Open the battery compartment by sliding the cover down.
2Plug the Battery Pack connector into the handset socket then place the battery pack and wires in the
compartment.
3Slide the battery cover back into place.
4(Optional) Attach the belt clip and change color face plate, if desired.

8
5Snap the bracket into place on the back of the base.
6Connect the power supply to a live outlet. Make sure the outlet is not controlled by a switch.
7Plug the adaptor into a power outlet near your equipment that is easily accessible.
8Place the handset in the base cradle. The handset and base communicate with each other
automatically. This is the Registration process, and it may take up to 60 seconds.
9Allow the handset to charge for 24 hours the first time. The CHARGE indicator on the base will
glow while the handset is charging.

9
10 Connect the Ethernet cable from the base to your router to begin using the phone (see Basic
Operation, below). Your router MUST be configured for DHCP operation for the 6001S to operate
correctly. Depending on your router model, you may also need to open a port to allow incoming
phone calls. Please see the Troubleshooting section for more information.
Basic Operation
When you plug the Ethernet cable into your router for the first time the 6001S will contact SunRocket over
your internet connection. The start of service may be delayed for up to 3 minutes as the internal firmware in
the device is upgraded. DO NOT UNPLUG THE BASE UNIT DURING THIS TIME.
While the unit is starting the 6001S handsets will display:
VOIP Resetting..
OR
HANDSET 1
NO LINE
After the voice server has been successfully contacted, with the handset idle (on hook) and the battery pack
having at least a minimum charge, it will display:
HANDSET 1
If for some reason the SunRocket network cannot be contacted, the handset will display “No Line”. Please
see the Troubleshooting section for more information.
When you name your Handset (see Handset Naming), the new name will replace ‘HANDSET 1’,
Answering Calls
If auto answer is disabled, press TALK, or any numerical key (0 to 9), or * or # .
If auto answer is enabled, the incoming call is answered by removing the handset from the charger. If the
handset is not cradled, simply press TALK, 0 – 9, * or #.
You can end your call by pressing TALK, or by placing the handset in the charger.
Display presentation for incoming calls:
An incoming call without Caller ID shows:
EXTERNAL CALL
When Caller ID information is provided, it will show in the display instead of ‘external call’. The Caller ID
either shows the calling number alone:
987-654-3210
or, in addition to that, it shows the caller’s name and time/date information.
The name, which will be shown in the second line, may either come from the service provider of the person
who is calling or from the Phone Book that is built into the phone. If the Caller ID information sent by the
service provider contains name information, this name will be shown. However, if the calling number
matches a number you have programmed in the Phone Book, the name associated with this number is
shown instead; the Phone Book name takes precedence.

10
The time/date information shown is generated by SunRocket. The time/date information is shown in the
first line.
10:20AM 6/01
SOMEBODY
987-654-3210
The caller ID information may be blocked by the caller. The handset will display calls with blocked
name/numbers as indicated below:
Private number:
SMITH
PRIVATE NUMBER
Out of area number:
SMITH
UNKNOWN NUMBER
Private name:
PRIVATE NAME
98-765-4321
Out of area name:
UNKNOWN NAME
98-765-4321
If both name and number are blocked:
Private name & number:
PRIVATE NAME
PRIVATE NUBMER
Out of area name & number:
UNKNOWN NAME
UNKNOWN NUMBER
Display presentation during an ongoing call:
When you answer a call, the display changes depending on the type of call. The different presentations are:
Call without caller ID:
TALK 1:32:56
EXTERNAL CALL
Call with caller ID (number only):
TALK 1:32:56
987-654-3210
If the caller ID number is blocked (and no name), the incoming call is shows as:
TALK 1:32:56
PRIVATE NUMBER
or
TALK 1:32:56
UNKNOWN NUMBER
Call with caller ID (number and name or an associated number in the Phone book):
TALK 1:32:56

11
SOMEBODY
Calls with blocked name in caller ID is shown as:
TALK 1:32:56
PRIVATE NAME
or
TALK 1:32:56
UNKNOWN NAME
The number ‘1:32:56’ represents the elapsed time of your call in hours, minutes and seconds.
Key entries during a call will replace the number/name in the second line, and the digits are left-truncated in
case the entered number exceeds 16 digits.
Display presentation after call is terminated
When the call is terminated, the current screen is maintained for 5 seconds before the phone returns to an
idle display. This current display is interrupted in the event of a key press or an incoming call.
Making Calls
Making Calls – Pre-Dialing
You can enter the phone number before pressing TALK to get a dial tone:
1. Enter the number. It will be displayed on the second line. In case the number exceeds 16 digits, it
continues in the third line. You may enter a 3-second pause in the sequence by pressing REDIAL. It
is indicated by the character "P". The number can be a maximum of 24 digits, including pauses.
1234567890123P96
322300
2. Check if the number is correct. You can backspace by pressing CLEAR. The entire number is cleared
by holding down CLEAR.
3. Press TALK to dial the displayed number.
TALK 0:00:01
7890123P96322300
Making Calls – Post-Dialing
1. Press TALK and listen for a dial tone. The Call Timer starts running and ‘EXTERNAL CALL’ is
shown in the display:
TALK 0:00:01
EXTERNAL CALL
2. Enter the phone number. This will replace ‘EXTERNAL CALL’ in the display:
TALK 0:00:02
9876543210
The display shows the number as they are entered. The first digit is entered in the left-hand side of the
second line.
Ending your outgoing call
Your outgoing call is terminated by either pressing END, or by placing the handset in the charger.
After terminating your call, the Call Timer stops running, and ‘ENDED’ is shown in the first line of the
display. The handset returns to the idle screen after 5 seconds. If the handset is put in the cradle, it returns to
the idle screen immediately.
ENDED 0:01:15
9876543210
NOTE:
If the handset connection is lost, (e.g. the handset is out of range from the base for at least 5 seconds), the
base unit automatically goes on-hook (terminates the call), and the handset will emit an out of range tone

12
as well as display ‘OUT OF SERVICE’.
Call Waiting / Call Waiting ID
Call Waiting
When you receive a Call Waiting alert tone in the earpiece (or Handset Speakerphone), the ‘waiting’ call
can be answered by pressing the FLASH key. Pressing FLASH clears the second line in the display. If the
‘waiting’ call is not answered, the display will return to normal ongoing call presentation after 15 seconds.
Call Waiting Deluxe
When the handset is in conversation, and you receive caller ID information, a special Call Waiting Deluxe
menu becomes available by pressing PROG. From this menu you have several options, which will change
depending on the state of the current call.
When and incoming call is received and after Caller ID is displayed, pressing PROG will display:
_ FORWARD- The incoming call is forwarded to your voice mail service if available.
_ ANNOUNCMENT- The incoming call is forwarded to your voice mail service if available.
_ DROP CALL - The incoming call is connected and the current call is dropped.
_ ANSWER CALL- The incoming call is connected and the current call is placed on hold.
_ PUT ON HOLD- The incoming call is put on hold and the current call remains connected.
_ CONFERNCE- Create a conference call between the incoming call and the current call.
After using PUT ON HOLD or ANSWER, pressing PROG will display
_ RETURN- Connects to incoming call and puts the current call on hold.
_ DROP CALL- The current call is dropped and the held call is connected.
_ CONFERENCE 3-way conference with both callers.
After starting a Conference Call pressing PROG will display:
_ DROP FIRST CALL- Drop the connection to the original call.
_ DROP LAST CALL- Drop the connection to the Call Waiting calls.
Here is an example of the display after pressing PROG during a Call Waiting ID event:
FORWARD CALL
ANNOUNCEMENT
Use the _ and _ scroll keys to highlight the desired action.
Confirm the action by pressing PROG.
The handset then returns to the normal call display.
The Call Waiting options menu can be aborted by pressing CANCEL.
Conference Calls
Two external phone numbers can be joined on a single call using the external conference feature. This
feature is accessed using the FLASH button.
To establish a conference:
1. Make the first call to an outside party.
2. Push the FLASH button to receive a second dial tone (you may also go back to original call by
pushing FLASH a 2nd time before the 2nd call has been dialed).
3. Dial the number of the 2nd party and wait for them to answer. If there is no answer, push the
FLASH button to return to the original call.
4. Push FLASH again to join the two calls in a conference.
The last caller may be dropped during a conference by pressing flash. When you hang up the external
conference is disconnected.
Redial
The last 5called numbers are stored in redial memory.
With the handset idle (on hook), press REDIAL to find the desired phone number. An error tone is emitted

13
in the event redial memory is empty. Press TALK to dial the displayed number. -OR-
Press TALK and listen for dial tone. Now, press REDIAL to scroll through the list of recently dialed
numbers. Dial the displayed number by pressing PROG.
Muting the Handset Microphone
It is possible to mute the microphone during a conversation by pressing the CLEAR/DEL key. With the
microphone muted, you can hear the other party, but they can’t hear you. Return to the two-way
conversation by pressing CLEAR/DEL again.
The Mute function is automatically cancelled when you hang up (go on hook).
Periodic beeps in the earpiece and a text message in the display indicate that the microphone is muted:
TALK 1:35:06
MIC MUTE
Page
The page call function is used as an aid to locate the handset.
Press PAGE on the base unit to page the handset.
Using the ‘Hands-Free’ Handset Speakerphone
The hands-free operation can be switched on and off while in conversation. Using the Handset
Speakerphone, you can place the handset on a table and talk hands-free.
With the handset either idle or active, enter hands-free operation by holding FLASH down for 2 seconds.
While in conversation, the hands-free function can be enabled or disabled by holding FLASH down for 2
seconds.
The hands-free mode is automatically deactivated when you terminate your call.
NOTE: The speakerphone is not accessible while the handset is in the charger.
Special Service Keys
There are 3 Special Service keys, located on the bottom row of the handset. SunRocket may charge a fee
for these services if they are not included in the service plan that you are subscribed to.
The 3 Special Service keys are:
a) Last Call Return- this will dial back the last party that called the phone.
b) Repeat Dial- this will automatically attempt to connect to the last number that was dialed. The phone
will ring when the call is completed. Answer the ringing phone to complete the call.
c) Information- this will connect the phone to information services (411). NOTE: There may be a per
call charge for any calls made to 411 by pushing this button.
To use any of these Special Service features:
1) Press the desired Special Service access key.
2) The phone automatically goes off-hook and the number is dialed.
-OR-
1) Press TALK.
2) Press the desired Special Service access key
Voice Mail
Voice Mail access from the Handset
To dial the voicemail access number:
1) Press the V. Mail access key.
2) The phone automatically goes off-hook and the number is dialed.

14
Intercom
To place an intercom call to another handset:
1. Press Int button
SELECT INTERNAL
HANDSET #2
2. Use the UP _ / DOWN _ keys to scroll through the available handsets and select the desired one, or select
CALL ALL to call all handsets.
3. Press Talk. The selected handset will ring; answer the call by pressing Talk
Handset Menu and Programming
1. Press PROG key to enter the menu.
2. Use the UP _ / DOWN _ keys to scroll through the menu items. By pressing _ at the last menu item,
you will scroll to the first menu item; and by pressing _ at the first menu item, you will scroll to the
last menu item.
3. Press CANCEL to step back one level in the menu.
4. Press PROG to choose the menu item shown in the first line of the display.
5. Enter setting/level number. A key click is heard when you enter a valid setting/level number.
6. Confirm setting/level by pressing the PROG key. The handset automatically returns to the previous
menu level.
In case the handset is in the menu mode when a call arrives, the phone automatically aborts the menu and
receives the incoming call. The menu is not accessible during an ongoing call.
If there are no key presses for 30 seconds while in the menu mode, the handset automatically returns to an
idle state.
The menu is accessed by pressing the PROG key. An overview of the menu structure is shown in Figure
1.1.
Idle
Call log
Recall
Phone book
Store
Handset Volume
Ring Volume
External
Ring pattern
Internal
Auto Answer
Key click
Key lock
Handset name
Language
Clear msg wait
View Settings
VoIP Settings
Program
Reset
Figure 1.1 Menu structure.

15
Caller ID Call Log
All incoming calls with a valid Caller ID provided phone number are stored in the phone’s call log. Please
note, this call log is separate from the call log provided within your SunRocket account. Name and
time/date information are also stored in the phone’s call log if the service provider sends it.
The number of entries stored in the call log is indicated when the handset is in idle mode:
HANDSET 1
1 CALL
The number of unanswered calls (NEW), if any, is indicated:
HANDSET 1
2 CALLS/1 NEW
The new call indication is removed when the call log has been reviewed.
The call log is entered via the menu, as described below or by pressing _ in idle mode, whereby the handset
jumps directly to the call log.
The call log is reviewed as follows:
1. PROG to enter the menu.
>CALL LOG
PHONE BOOK
2. PROG to enter the call log sub-menu.
3. The caller’s name is shown in the second line of the display and the number in the third line. If time and
date information is contained in the CID and there are three lines in the display, it is shown in the top line.
7:48PM 4/07 NEW
SOMEBODY
987-654-3210 3
The name contained in the received CID is replaced by the name in the Phone Book, if the Phone Book
contains a matching number; i.e. the Phone Book name takes precedence.
4. Scroll through the call log entries using the _ and _ keys.
11:02AM 11/27
ANOTHERPERSON
012-345-6789 14
The following actions are possible from the call log:
_ Dialing the caller displayed by pressing the TALK key.
_ Deleting the caller displayed by pressing the CLEAR key.
If you press the DELETE key, you will be asked ‘DELETE?’; you can either accept deletion by pressing
PROG (=yes) or cancel it by pressing CANCEL (=no).
CALL LOG
DELETE?
The phone returns to call log review.
_ You can delete all entries in the call log by pressing and holding CLEAR. You will then be asked
‘DELETE ALL?’ Accept the deletion by pressing PROG (= yes) or cancel it by pressing CANCEL (=
no).
CALL LOG
DELETE ALL?
Note: ‘DELETE ALL’ will only function when there are no NEW (unreviewed) records.

16
By selecting PROG, the phone displays “CALL LOG EMPTY” for 5 seconds and returns to main menu
after deleting. By selecting CANCEL, the phone returns to the call log.
_ Storing the Caller ID information displayed into the Phone Book by pressing the PROG key. Before the
name and number is transferred to the Phone Book, you can edit the number and name. The phone returns
to call log review.
Note: Caller ID information without a valid phone number cannot be transferred to Phone Book memory.
_ Exit the call log review by pressing the CANCEL key.
Two information messages are displayed together with the Caller ID data:
_ ‘NEW’ icon on the right hand side of the top line indicates that the call has not previously been reviewed.
The ‘NEW’ icon is cleared when scrolling to the next entry or when leaving the call log. The maximum
length of the name shown in the second line is 16 characters. If the name is longer, it is right truncated.
_ A number in the right hand side of the third line shows the call log number - 1 is the first (oldest) received
call. The maximum length of the number shown in the third line is 16 characters. If the number is longer, it
is left truncated.
The incoming calls are sorted by the order of arrival; the newest is shown first. A number is only displayed
once in the list. A new call from a caller that is already contained in the log removes the old entry and
inserts the new call. All calls with a blocked number are stored as individual calls. Your handset stores 20
records.
If the call log is full the oldest entry is deleted to make room for the new call. If the call log is empty when
the user tries to enter call log review, a message ‘CALL LOG EMPTY’ is displayed and the phone returns
to the main menu after 5 sec.
CALL LOG EMPTY
It is possible to change the number format in the call log before storing the name/number in the Phone book
or dialing the caller. Pressing the REDIAL key toggles the number format. The available number formats
depend on the received number. The table below shows the possible selections and the order as a function of
the incoming number format. The number format is changed by truncating or by adding the digits as
described in the table 1.1.
Incoming format
Dialable/storable formats and selection sequence
11
1xxx-yyy-yyyy xxx-yyy-yyyy 1-yyy-yyyy yyy-yyyy
10
xxx-yyy-yyyy 1-yyy-yyyy yyy-yyyy 1xxx-yyy-yyyy
8
1-yyy-yyyy yyy-yyyy
7
yyy-yyyy 1-yyy-yyyy
Table 1.1 Number format selection.
yyy-yyyy: basic number
xxx: area code
Phone Book
_ You can store up to 50 Phone book entries, which includes names and phone numbers.
_ The Phone book entries are sorted and presented in alphabetical order.
_ It is possible to abort an initiated Phone book operation by double-clicking the TALK key.
Characters

17
Names are entered using the numerical keys. Characters are generated by multiple key presses (see the table
below). The cursor moves to the next position if another numerical key is pressed or by pressing the _ key.
The last entered character is deleted by pressing CLEAR or _. The entire name is cleared with a long
CLEAR key press.
Key
Character versus key press numbers
1
2
3
4
5
6
7
8
9
1
space
1
2
A
B
C
2
a
b
c
3
D
E
F
3
d
e
f
4
G
H
I
4
g
h
i
5
J
K
L
5
j
k
l
6
M
N
O
6
m
n
o
7
P
Q
R
S
7
p
q
R
s
8
T
U
V
8
t
u
v
9
W
X
Y
Z
9
w
x
Y
Z
0
0
*
*
?
!
/
(
)
#
#
'
,
-
.
&
Table 1.2 Character guide.
Phone Book Operation
The Phone Book is entered via the menu, as described below.
The Phone book is accessed as follows:
1) PROG to enter the menu.
>CALL LOG
PHONE BOOK
2) DOWN (_)
>PHONE BOOK
HANDSET VOLUME
3) PROG to enter the Phone Book sub-menu.
>RECALL
STORE
HINT: With the handset idle (on-hook), press _ to go directly to Phone Book mode.
From the Phone Book RECALL menu it is possible to:
_ Search for an entry and dial the number. If no records match the search criteria the closest alphabetic
match is displayed.
_ Edit an entry.
_ Delete an entry.
From the Phone Book STORE menu it is possible to:
_ Enter a new entry in the Phone Book.
When attempting to search, edit or delete entries in an empty Phone Book, the handset will display:
PHONEBOOK EMPTY
How to use your Phone Book:
Searching for and dialing from the Phone Book:
1) Press PROG to enter the menu; press _ to put PHONE BOOK on the top line of the display; press
PROG again; with "RECALL" in the first line, press PROG again.
ALICE
2278238989
2) Scroll through the Phone book entries using _ or _; OR enter the first character of the desired name and

18
continue searching using the UP/DOWN keys.
R
ROBERT
9898327822
1) Press TALK to dial the number.
TALK 0:00:01
9898327822
Editing a Phone Book entry:
1) Press PROG to enter the menu; press _ to put PHONE BOOK on the top line of the display; press
PROG again; with "RECALL" in the first line, press PROG again.
ALICE
2278238989
2) Scroll through the Phone book entries using _ or _; OR enter the first character of the desired name and
continue searching using the UP/DOWN keys.
R
ROBERT
9898327822
3) Press PROG to enter number edit mode and enter correct number. Press CLEAR or _ to erase a digit. A
long CLEAR key press erases the whole number.
STORE NUMBER
9898327777
4) Press PROG to confirm number and enter name edit mode.
STORE NAME
ROBT
5) Press CLEAR or _ to erase right most character. A long CLEAR key press erases the whole name.
STORE NAME
ROBERT
6) Press PROG to confirm change. The phone returns to Phone Book recall mode, and displays the entry
that was edited.
ROBERT
9898327777
Deleting a Phone Book entry:
1) Press PROG to enter the menu; press _ to put PHONE BOOK on the top line of the display; press
PROG again; with "RECALL" in the first line, press PROG again.
ALICE
2278238989
2) Scroll through the Phone book entries using _ or _; OR enter the first character of the desired name and
continue searching using the UP/DOWN keys.
R
ROBERT
9898327777
3) Press CLEAR; you will then be asked to confirm your decision.
ROBERT
DELETE?
4) Press PROG to accept; the Phone Book displays the next entry –OR- Press CANCEL to abort.
ALICE
2278238989
Entering new names and numbers into the Phone Book:
1) Press PROG to enter the menu; press _ to put PHONE BOOK on the top line of the display; press
PROG again; press _ to put "STORE" in the first line; then press PROG again.
STORE NUMBER
2) Enter the number (up to 24 digits). In case the number exceeds 16 digits, the number is left truncated and
the last entered 16 digits are shown.
STORE NUMBER

19
9876543210
3) Press PROG
STORE NAME
4) Enter the desired name. A name has to be entered otherwise an audible alert is given and the phone
returns to the ‘STORE NAME’ display.
STORE NAME
SOMEBODY
5) Press PROG. Your new entry has been stored. The screen returns to:
>STORE
RECALL
Press CANCEL twice to return to the idle screen.
If the Phone Book is full when the user tries to store a new number in it, a message ‘PHONEBOOK
FULL’ is displayed and the phone returns to the Phone Book menu (Store/Recall) after 5 seconds.
PHONEBOOK FULL
Volume
Handset volume is adjusted by the following key sequence:
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press _ two times.
>HANDSET VOLUME
RING VOLUME
3) Press PROG to enter the volume sub-menu.
HANDSET VOLUME
nnn
4) Enter 0 (quietest) to 7(loudest); or adjust using _/_ keys.
HANDSET VOLUME
nn
5) Press PROG to confirm the setting. The display returns to:
>HANDSET VOLUME
RING VOLUME
NOTE: During your conversation, the volume can be adjusted with the _/_ keys. The level will be
represented by the number of bars displayed on the screen. If you try to adjust the volume beyond the lower
or upper limits, the handset will emit an error tone. The display returns to normal in-call presentation after 4
seconds. The default audio volume is 2.
Ring Volume
The ring volume is adjusted by the following key sequence:
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press _ three times.
>RING VOLUME
RING PATTERN
3) Press PROG to enter the ring volume sub-menu.
RING VOLUME
nnn
4) Enter 0 (ringer OFF) to 6(loudest); -OR- adjust using _/_ keys. The current ring tone selected is played
once at the new volume.
RING VOLUME
nn
5) Press PROG to confirm the setting. The display returns to:
>RING VOLUME

20
RING PATTERN
Ringing is switched off by adjusting the ring volume to zero. A "Ringer OFF" icon is shown in the display
during idle mode. The default ring volume is 3.
Ring Pattern
The ring pattern of an incoming call is changed by the following key sequence:
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press the _ key four times.
>RING PATTERN
AUTO ANSWER
3) Press PROG to enter the ring pattern sub-menu.
>EXTERNAL
INTERNAL
4) Press the PROG key to choose external ring pattern setting.
EXT RING PATTERN
0
5) Enter 0to 9 , or adjust using _/_ keys. The selected ring pattern is played for you.
EXT RING PATTERN
4
6) Press PROG to confirm the setting. The display will return to:
>EXTERNAL
INTERNAL
The default external ring pattern is 0.
Auto Answer
With Auto Answer ON, you can answer a call by simply removing the handset from the base unit.
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press the _ key five times.
>AUTO ANSWER
KEY CLICK
3) Press PROG to enter the auto answer sub-menu.
AUTO ANSWER
OFF
4) Enable auto answer by pressing 1or _, or disable auto answer by pressing 0 or _.
AUTO ANSWER
ON
5) Press PROG to confirm the setting. The display will return to:
>AUTO ANSWER
KEY CLICK
Auto answer is disabled by default.
Key Click
When the key click option is enabled, any key press generates a click sound, except when the keypad is
locked. To access the Key Click option:
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press the _ key six times.
>KEY CLICK
KEY LOCK
3) Press PROG to enter the key click sub-menu.