Amerihome SWTB36 User manual

BARCODE TWO BOLTS “
E
D
G
E
A
CORNER
STICKER
3 1/8"
Drill Here
Drill Here
Drill Here
EDGE
1) Place template in Corner A of table
2) Line up frame with template
3) Use a pencil to mark all holes
4) Remove template and drill holes
DRILLING INSTRUCTIONS
A
BARCODE
ITEM # SWTB36
Assembly Instructions
Max Weight Capacity 300 Lb
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation &
maintenance. Every effort has been made to ensure the accuracy of this
manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change
this product at any time without prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING
SAFE OR UNSAFE, DO NOT USE THIS PRODUCT!
Questions? Problems? CALL CUSTOMER SERVICE
FOR SERVICE, PARTS & TECHNICAL
SUPPORT. If you experience a problem, have questions
or need parts for this product, visit our website
http://www.amerihomebrand.com or call Customer
Service at 1-636-532-9888, Monday-Friday,
8 AM - 4 PM Central Time, or email :
[email protected]. A copy of the
sales receipt is required.
KEEP MANUAL, SALES RECEIPT
& WARRANTY FOR FUTURE
REFERENCE
8 SCREWS “ I”
Frame

F
B
HARDWARE
A
BARCODE
Identify and locate all hardware components listed below.
15 PCS *
( * 2 pieces
are extra)
12 PCS
8 PCS
5. When all pieces are attached,
tighten each screw securely.
4. Attach X-‐support (B) using 1 piece
screw (F) and nut (K).
1. Attach each Table Frame (C) to Table Top (A)
using 8 pieces medium screws (I).
3. Attach each Table Leg (D) to Table Top
Frame (C) using 8 pieces bolts (F).
2. Attach 1 piece X-‐support (B)
using 4 pieces bolts (F).
I
I