Amerihome HCDTSET36 User manual

1) 2)
3) 4)
HARDWARE & COMPONENTS
#A)
#D)
TOP 1 PIECE
#C) TABLE LEGS
HEX SCREWS
4 PIECES
4 PIECES
Call Customer Service 636-532-9888 if parts are missing. Do not exceed maximum weight capacity
HCDTSET36
TABLE
ASSEMBLY
PAGE 1 OF 2
(ITEM # SWT36 / ITEM # STBB80)
Attach X-support (B) using 1 piece small screws ( E ). When all pieces are attached, tighten each screw securely.
Attach X-Support (B) to each Table Leg (C) using 4 screws (D) .
Identify and locate all hardware & components listed.
X-SUPPORT
#B)
#E)
#H)
HEX BOLT 1 PIECE
1 PIECE
#G) HEX KEY 4 PIECES
8 PIECES
HEX KEY
#F)
Place table top (ITEM # SWT36) on smooth at surface.
Protect the top from scratches. Attach each Table Leg (C)
to Table Top (A) using 8 pieces screws ( H ).
WEIGHT CAPACITY
TABLE : 330 LBS

Call Customer Service 636-532-9888 if parts are missing. Do not exceed maximum weight capacity PAGE 2 OF 2
1)
3) 4)
COMPONENTS FOR EACH CHAIR
#1) CHAIR
WOOD SEAT
SCREWS
1 PIECE
1 PIECE
14 PIECES
#3)
HCDTSET36
CHAIR
ASSEMBLY
WEIGHT CAPACITY
CHAIR : 330 LBS
Identify all components before assembly.
(ITEM # DCBNT4 / ITEM # SWTCS2)
CHAIR SEAT SCREWS
Locate chair, seat and pack of 14 screws. You will need a
Phillips screwdriver or a drill with a Phillips drill bit.
Turn chair upside down and position wood seat.
Repeat assembly for remaining chairs.
2)
Loosely attach all screws. When all 14 screws have been
attached and seat is secure, tighten all remaining screws.