Amerihome BSSS1 User manual

BSSS1
Bar Stool Assembly Instructions
Max Weight Capacity 330 Lb 201402
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.amerihomebrand.com or call Customer Service at 1-888-287-6981, Monday-Friday,
8 AM - 4 PM Central Time. A copy of the sales receipt is required.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.
Base
Support Cylinder
Seat
Foot Rest
Remove Black Cap
Discard Before Assembly
ATTENTION! DETERMINE IF
BLACK CAP IS INSTALLED
ON SUPPORT CYLINDER
Hydraulic Cylinder

ASSEMBLY INSTRUCTION
For proper assembly, follow these instructions.
You may find a Black Cap which is installed to protect the hydraulic mechanism on the Support
Cylinder during shipment. If the cap is installed, you must remove it before assembly. The hydraulic
button will become visible. (Figures 1 & 2)
3 Hex Bolts are attached to the bottom of the Hydraulic
Cylinder. Remove the Hex Bolts. (Figure 3)
Locate the Base (Figure 4)
Position the Base and the Hydraulic Cylinder so that the
3 Hex Bolts holes are aligned, then attach with 3 Hex Bolts.
(Figure 5)
.
Use the 4 Hex Bolts to attach the Support Cylinder
with Seat. (Figure 6)
Position the Support Cylinder on top of Hydraulic
Cylinder. (Figure 7) Press down firmly.
To separate the Support Cylinder and Hydraulic
Cylinder when moving, use a rubber mallet and hit
the center bracket
firmly.
Remove Black Cap
Discard Before Assembly
ATTENTION! DETERMINE IF
BLACK CAP IS INSTALLED
ON SUPPORT CYLINDER
Includes
1Hex Key and
4 Individual
Hex Bolts
Figure 3
Figure 1
Figure 2
Figure 4
Figure 5
Figure 6
Figure 7