Amerihome ABSWING4 User manual

ABSWING4
4 Ft Amish Bench
Assembly Instructions
Max Weight Capacity 500 Lb
!
!
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.amerihomebrand.com or call Customer Service at 1-888-287-6981, Monday-Friday,
8 AM - 4 PM Central Time, or email : [email protected]. A copy of the sales receipt is required.
KEEP MANUAL, SALES RECEIPT & WARRANTY FOR FUTURE REFERENCE!

HARDWARE
!
!
!
(A) 3 1/2" Carriage Bolts 2 pieces
(C) Locking Nuts 8 pieces
(E) Washers 12 pieces
TOOLS YOU WILL NEED
• Hammer • 1/2" Ratchet • 1/2" Wrench
PARTS LIST
Bench Seat
Right Arm
Rest
Bench Back
(B) 3" Carriage Bolts 2 pieces
Right Rear
Leg
Chain Kit
Left Arm
Rest
(D) Eye Bolts 4 pieces

ASSEMBLY
1. Wedge!bench!back!between!the!two!extensions!in!the!back!of!the!bench!seat!and!align!holes.!
a. Place!a!3!½”!carriage!bolt!(from!outside!to!inside)!in!through!the!bench!seat!and!allow!bolt!to!come!out!
on!the!inside!of!the!bench!back!pre@drilled!hole.!(DO!NOT!SECURE!WITH!LOCKING!NUT!YET)!
!
2. Take!left!arm!rest!and!place!an!eye!bolt!and!washer!in!through!the!lower!hole!on!the!front!leg,!a!3”!bolt!on!the!
upper!hole!on!the!front!leg!and!finally!an!eye!bolt!and!washer!through!the!back!of!the!arm!rest.!
!
3. Align!the!arm!rest!and!pre@placed!bolts!with!the!holes!on!the!left!side!of!the!bench!seat!and!bench!back.!!See!
photo!below.!!
!!
!
4. You!may!now!secure!the!bolts!that!have!been!inserted!in!steps!1!and!2.!Be!sure!to!place!a!washer!in!on!the!back!
side!of!the!bolt!and!follow!with!a!locking!nut.!For!the!carriage!bolts,!it!is!recommended!you!set!the!bolts!by!
tapping!in!place!with!a!hammer.!You!will!now!use!the!½”!long!socket!and!½”!wrench!to!tighten!the!locking!nuts!
and!secure!the!bolts.!!!
!
5. Repeat!steps!2@4!on!the!right!side!of!the!swing!with!the!right!arm!rest.!
3”!Carriage!Bolt!
Washer!&!Eye!Bolt!
on!Outside!
Washer!&!Locking!Nut!
on!Inside!

!
6. Next,!add!the!chain!kit!to!eye!bolts!on!each!side.!!
!
!
Eye!Bolt!&!Chain!Kit!