Ametek iPac User manual

iPac®Pachymeter
User’s Guide

©2017 AMETEK, Inc.
iPac, Reichert and Reichert Technologies are registered trademarks of Reichert, Inc.
The Bluetooth word mark, figure mark, and combination mark are registered trademarks owned
by Bluetooth SIG.
AMETEK is a registered trademark of AMETEK, Inc.
The information contained in this document was accurate at time of publication.
Reichert, Inc. reserves the right to make changes in the product described in this manual without
notice and without incorporating those changes in any products already sold.
ISO 9001/13485 Certified – Reichert products are designed and manufactured under quality
processes meeting ISO 9001/13485 requirements.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, recording, or otherwise, without the prior written
permission of Reichert, Inc.
Caution: Federal law restricts this device to sale by or on the order of a
licensed physician. Rx Only.

16040-101 Rev. J 3
Table of Contents
Warnings and Cautions ........................................................... 4
Symbol Information.................................................................. 7
Introduction.............................................................................. 8
Instrument Setup .....................................................................10
Unpacking Instructions ........................................................10
Parts Identication...............................................................11
Accessories .........................................................................11
Optional Accessories...........................................................11
Icon Description...................................................................12
Charging the iPac Pachymeter............................................13
Power Up Mode...................................................................14
Measurement Mode ............................................................14
Sleep Mode .........................................................................14
iPac Setup Menu .................................................................15
iPac Menu Options .............................................................17
Bluetooth ..........................................................................17
About ................................................................................18
Date/Time .........................................................................19
Display..............................................................................20
Instrument Operation...............................................................21
Measurement Screen ..........................................................21
Operation.............................................................................23
Operational Check...............................................................23
Patient Preparation..............................................................23
Measurement Process ........................................................24
Bluetooth Printing ................................................................26
iPac Bluetooth Printer..........................................................27
Cleaning and Disinfection.......................................................28
iPac Cleaning Instructions...................................................28
Measurement Tip Cleaning Instructions ..............................28
Measurement Tip High Level Disinfection Instructions......29
Maintenance and Storage .......................................................30
General Maintenance ..........................................................30
Battery .................................................................................30
Storage................................................................................30
Troubleshooting.......................................................................31
Specications ..........................................................................32
Disposal...............................................................................32
Software Revision ...............................................................32
Guidance & Manufacturer’s Declaration..................................33
Regulatory Compliance - Bluetooth.........................................37
Acoustic Output .......................................................................38
Warranty ..................................................................................40
Appendix A...............................................................................41

4 16040-101 Rev. J
Warnings and Cautions
WARNING: AN INSTRUCTION THAT DRAWS ATTENTION TO RISK OF INJURY OR DEATH.
WARNING: UNITED STATES FEDERAL LAW AND EUROPEAN REGULATIONS REQUIRE THAT
THIS DEVICE BE PURCHASED ONLY BY A PHYSICIAN OR A PERSON ACTING ON BEHALF OF
A PHYSICIAN. ONLY USERS TRAINED IN THE USE OF OPHTHALMIC INSTRUMENTS THAT
CONTACT THE EYE SHOULD USE THIS DEVICE. REICHERT TECHNOLOGIES CANNOT BE HELD
RESPONSIBLE FOR ANY DAMAGE OR INJURY THAT RESULTS FROM A FAILURE TO FOLLOW
DIRECTIONS IN THE USER’S MANUAL. PLEASE ENSURE THAT YOU ARE ENTIRELY FAMILIAR
WITH THE CORRECT PROCEDURES FOR OPERATING THE INSTRUMENT BEFORE USE.
WARNING: THIS INSTRUMENT SHOULD BE USED IN STRICT ACCORDANCE WITH THE
INSTRUCTIONS OUTLINED IN THIS USER’S GUIDE. THE SAFETY OF THE OPERATOR AND THE
PERFORMANCE OF THE INSTRUMENT CANNOT BE GUARANTEED IF USED IN A MANNER NOT
SPECIFIED BY REICHERT TECHNOLOGIES.
WARNING: DO NOT REPAIR OR SERVICE THIS INSTRUMENT WITHOUT AUTHORIZATION FROM
THE MANUFACTURER. ANY REPAIR OR SERVICE TO THIS INSTRUMENT MUST BE PERFORMED
BY EXPERIENCED PERSONNEL OR DEALERS WHO ARE TRAINED BY REICHERT OR SERIOUS
INJURY TO THE OPERATOR OR PATIENT MAY OCCUR.
WARNING: MODIFICATIONS TO THIS INSTRUMENT ARE NOT ALLOWED. ANY MODIFICATION TO
THIS UNIT MUST BE AUTHORIZED BY REICHERT OR SERIOUS INJURY TO THE OPERATOR OR
PATIENT MAY OCCUR.
WARNING: ENSURE THAT THE VOLTAGE APPLIED TO THE UNIT IS THE SAME AS THE
VOLTAGE THAT IS INDICATED ON THE DATA PLATE OR DAMAGE TO THE UNIT MAY OCCUR.
WARNING: THIS INSTRUMENT IS NOT SUITABLE FOR USE IN THE PRESENCE OF FLAMMABLE
ANESTHETIC MIXTURES, SUCH AS OXYGEN OR NITROUS OXIDE.
WARNING: THE BATTERY SHOULD ONLY BE REPLACED WITH THE BATTERY SPECIFIED IN
THIS MANUAL. USE OF ANOTHER BATTERY MAY CAUSE FIRE OR AN EXPLOSION.
WARNING: AFTER EACH PATIENT, PERFORM THE CLEANING INSTRUCTIONS AS INDICATED IN
THE CLEANING SECTION OF THIS MANUAL.
WARNING: THE BATTERY SHOULD ONLY BE REPLACED WITH THE BATTERY SPECIFIED IN THIS
MANUAL. USE OF ANOTHER BATTERY MAY CAUSE FIRE OR AN EXPLOSION.
WARNING: DO NOT USE THE IPAC PACHYMETER IF THE MEASUREMENT TIP IS CRACKED,
CHIPPED OR SHOWS ANY IRREGULARITY OF THE SURFACE, TO PREVENT PATIENT INJURY
AND OR INACCURATE READINGS.
WARNING: IF THIS INSTRUMENT IS MODIFIED, APPROPRIATE INSPECTION AND TESTING
MUST BE CONDUCTED TO ENSURE CONTINUED SAFE USE OF THIS INSTRUMENT.
WARNING: DO NOT EXPOSE THE BATTERIES TO TEMPERATURES ABOVE 140ºF, DISASSEMBLE
THE BATTERIES, OR DAMAGE TO THIS UNIT AND/OR SERIOUS PERSONAL INJURY MAY RESULT.

16040-101 Rev. J 5
Warnings and Cautions (continued)
WARNING: DO NOT PLACE A SHORTING DEVICE BETWEEN THE BATTERY TERMINALS, OR
ALLOW THE BATTERY TO BECOME WET. MISUSE OR IMPROPER DISPOSAL OF THIS BATTERY
MAY CAUSE IT TO BECOME VERY HOT, IGNITE OR EXPLODE. DAMAGE TO THIS UNIT AND/OR
SERIOUS PERSONAL INJURY MAY RESULT.
WARNING: ALWAYS KEEP BATTERIES OUT OF THE REACH OF INFANTS AND YOUNG CHILDREN
TO PREVENT THEM FROM BEING SWALLOWED. IF SWALLOWED, CONSULT A PHYSICIAN
IMMEDIATELY.
WARNING: NEVER ALLOW LIQUID LEAKING FROM THE BATTERY TO GET IN YOUR EYES OR
MOUTH AS THIS LIQUID COULD CAUSE SERIOUS PERSONAL INJURY. IF IT COMES IN CONTACT
WITH YOUR EYES OR MOUTH, FLUSH THEM IMMEDIATELY WITH PLENTY OF WATER AND
CONSULT A PHYSICIAN.
WARNING: IN ORDER TO PREVENT PATIENT-TO-PATIENT TRANSFER OF INFECTION, AFTER
EACH USE DISINFECT THE MEASUREMENT TIP FOLLOWING ACCEPTED LOCAL CLINICAL PRO-
CEDURES REGARDING THE USE OF DISINFECTANTS. ANY CLINICALLY APPROVED CHEMICAL
DISINFECTANT CAN BE USED.
WARNING: MEASUREMENTS SHOULD NOT BE ATTEMPTED WHEN OCULAR INTEGRITY IS
QUESTIONABLE. THE HANDHELD TRANSDUCER MUST TOUCH THE EYE DURING OPERATION.
CONSEQUENTLY, THE USER NEEDS TO EXHIBIT CARE IN MANIPULATING THE TRANSDUCER.
FORCE SHOULD NOT BE EXERTED AGAINST THE EYE – THE TRANSDUCER TIP ONLY NEEDS
TO LIGHTLY TOUCH THE CORNEA.
WARNING: TO ENSURE PATIENT ISOLATION FROM HIGH ELECTRICAL POTENTIAL, DO NOT USE
THE IPAC ON A PATIENT WHEN THE INSTRUMENT IS CHARGING. IPAC CHARGING MUST ONLY
TAKE PLACE AT A DISTANCE OF AT LEAST 1.5 M FROM THE PATIENT.
WARNING: IT IS PRUDENT TO MINIMIZE THE PATIENT’S EXPOSURE TO ULTRASOUND ENERGY
TO A LEVEL AS LOW AS REASONABLY ACHIEVABLE (ALARA) BY REDUCING THE NUMBER OF
SCANS NEEDED TO BE PERFORMED. ADVISE THE PATIENT OF WHAT TO EXPECT DURING A
SCAN TO REDUCE REPETITIVE SCANS. THE AMERICAN INSTITUTE OF ULTRASOUND IN MEDI-
CINE (AIUM) HAS A PUBLICATION “MEDICAL ULTRASOUND SAFETY” (1994) WHICH HAS MORE
INFORMATION ON THIS TOPIC.
CAUTION: AN INSTRUCTION THAT DRAWS ATTENTION TO THE RISK OF DAMAGE TO
THE PRODUCT.
CAUTION: DO NOT IMMERSE THE IPAC PACHYMETER IN FLUIDS OR DAMAGE TO THE ELEC-
TRONICS MAY OCCUR.
CAUTION: DO NOT ATTEMPT TO MODIFY THE IPAC PACHYMETER OR PATIENT INJURY, AND/OR
INACCURATE READINGS MAY OCCUR.
CAUTION: THIS DEVICE HAS NOT BEEN TESTED IN CONJUNCTION WITH HF SURGICAL (E.G.
ELECTROCAUTERY) EQUIPMENT AND SHOULD NOT BE USED WITH SUCH EQUIPMENT.

6 16040-101 Rev. J
Warnings and Cautions (continued)
CAUTION: THE INTERNAL CIRCUITRY OF THE INSTRUMENT CONTAINS ELECTROSTATIC
DISCHARGE SENSITIVE DEVICES (ESDS) THAT MAY BE SENSITIVE TO STATIC CHARGES
PRODUCED BY THE HUMAN BODY. DO NOT REMOVE THE COVERS WITHOUT TAKING PROPER
ESDS PRECAUTIONS.
CAUTION: THIS INSTRUMENT IS NOT INTENDED TO BE CONNECTED TO EQUIPMENT OUTSIDE
THE CONTROL OF REICHERT INC. OR MUST BE TESTED TO AN APPLICABLE IEC OR ISO
STANDARDS.
CAUTION: DO NOT USE SOLVENTS OR STRONG CLEANING SOLUTIONS ON ANY PART OF
THIS INSTRUMENT AS DAMAGE TO THE UNIT MAY OCCUR. SEE MAINTENANCE SECTION FOR
DETAILED CLEANING INSTRUCTION.
CAUTION: DO NOT AUTOCLAVE OR DISINFECT USING HIGH TEMPERATURES EXCEEDING
THE RECOMMENDED TEMPERATURES INDICATED IN THE SPECIFICATIONS SECTION OF THIS
MANUAL OR DAMAGE TO THE UNIT MAY OCCUR.
CAUTION: DO NOT ATTEMPT INTERNAL STERILIZATION OF IPAC OR DAMAGE TO THE ELEC-
TRONICS MAY OCCUR.
CAUTION: USE OF AMMONIA BASED CLEANERS ON THE DISPLAY (OLED) MAY CAUSE DAMAGE
TO THE DISPLAY. SEE MAINTENANCE SECTION FOR DETAILED CLEANING INSTRUCTION.
CAUTION: MEDICAL ELECTRICAL EQUIPMENT NEEDS SPECIAL PRECAUTIONS REGARDING
EMC AND NEEDS TO BE INSTALLED AND PUT INTO SERVICE ACCORDING TO THE EMC INFOR-
MATION PROVIDED IN THIS GUIDE. PORTABLE AND MOBILE RF COMMUNICATIONS EQUIPMENT
CAN AFFECT MEDICAL ELECTRICAL EQUIPMENT.
CAUTION: ELECTROMAGNETIC INTERFERENCE FROM OTHER DEVICES MAY AFFECT THIS
INSTRUMENT. IF INTERFERENCE IS PRESENT, TURN OFF OTHER ELECTRONIC DEVICES, OR
REMOVE THEM FROM THE IMMEDIATE AREA WHILE OPERATING THIS INSTRUMENT.
CAUTION: ALWAYS ENSURE THE IPAC IS CHARGED SUFFICIENTLY OR ERRATIC READINGS
MAY OCCUR. USE ONLY THE SUPPLIED CHARGER PROVIDED WITH THE UNIT. IT IS RECOM-
MENDED THAT THE IPAC BE ATTACHED TO ITS CHARGER (OR CHARGING BASE) WHEN NOT IN
USE TO ENSURE PROPER OPERATION.
CAUTION: DO NOT ATTEMPT TO CHARGE THE IPAC OR POWER THE CHARGING CRADLE US-
ING THE USB PORT OF A COMPUTER OR DAMAGE TO THE IPAC OR COMPUTER MAY OCCUR.

16040-101 Rev. J 7
Symbol Information
Caution
Protective Earth - Indicates that a protective earth ground is connected
where the symbol is located.
REF Catalog Number
SN Serial Number
Manufacturer
2017
Date of Manufacture
Waste of Electrical and Electronic Equipment
Compliance to Medical Device Directive 93/42/EEC
Consult Instructions for Use - Indicates that important operating and
maintenance instructions are included in this User’s Guide.
Authorized Representative in European Community
Fragile Contents in Shipping Container - handle with care
Keep Dry - Package shall be kept away from rain.
Type BF Product Classification.
Authorized to mark given by Intertek ETL Semko for conformance with
electrical standards.
C-Tick mark for ACMA in Australia Trade Marks Act 1995 and RSM in
New Zealand under section 47 of the New Zealand Trademarks Acts.

8 16040-101 Rev. J
Introduction
Congratulations on your purchase of the Reichert®iPac®Pachymeter.
This User’s Guide is designed as a training and reference manual for operation,
maintenance, and troubleshooting. We recommend that you read it carefully prior
to use and follow the instructions in the guide to ensure optimum performance of
your new instrument. If used properly, the iPac Pachymeter will provide you with
fast, accurate and reliable measurements for many years. Properly trained eyecare
professionals such as ophthalmologists, optometrists, opticians and eye care
technicians should operate this instrument.
Please retain this manual for future reference and to share with other users. Additional
copies can be obtained from the Reichert Customer Service Department. Contact
information is provided at the end of this guide.
Intended Use
The iPac Pachymeter is intended to measure thickness of the cornea in the human
eye using ultrasound energy.
Indications for Use
The indications for use is to measure the thickness of the cornea.
Contraindications
None.
Device Description
The iPac Pachymeter is an ergonomic, hand-held Pachymeter that measures central
corneal thickness. The body of the instrument is designed to fit comfortably in the
user’s hand, facilitating fast and accurate measurements. The tip of the Pachymeter
contains a sensor which measures central corneal thickness. The electronics
housed in the ergonomic iPac Pachymeter body process and analyze the waveforms
produced by each measurement of the corneal thickness of the eye. These are used
to produce an averaged pachymetry measurement. The measurement is displayed on
the Organic Light Emitting Diode (OLED) display.
A rechargeable battery is used in the iPac Pachymeter and consists of a lithium ion
battery.
-continued-

16040-101 Rev. J 9
Introduction (continued)
Features
The iPac Pachymeter has the following features:
• Easy to Use - corneal thickness can be measured accurately by medical eye care
professionals.
• Portable - The iPac Pachymeter weighs just 3.53 oz. (100 g) and is rechargeable.
• Versatile - The iPac Pachymeter may be used easily with the patient in any
position, making the instrument suitable for the ofce, in clinics, at the hospital
bedside, and in remote locations.
• Bluetooth®Technology - wireless connectivity enabling communication to associ-
ated remote devices.
• OLED Color Display - Intuitive graphical display for ease of use.
Device Regulatory Classification
• Insulation Protection Class II
• Ingress Protection IPX1
• Applied Part Type BF
• Operation Mode Continuous

10 16040-101 Rev. J
Instrument Setup
Unpacking Instructions
Great care has been taken to deliver your iPac Pachymeter to you. The packaging
was specifically designed to transport this instrument. Please retain the packaging for
future use in case transportation is required.
Removing the iPac Pachymeter
1. Lift the insert that contains the Carrying Case and
iPac Charging Cradle out of the box.
2. Unfold the insert and slide the Carrying Case and
iPac Charging Cradle out of the insert.
3. Open the carrying case, remove the User’s Guide
and read the instructions carefully.
4. Remove the iPac from the case, and charge the
instrument according to the Charging the iPac
Pachymeter section.
5. Store the box and insert in a safe place so that if it
is needed for future shipping, it will be available.
The items listed below should be included in the iPac
Pachymeter packaging:
• Carrying Case
• iPac Pachymeter
• Lanyard
• Tip Cover
• User’s Guide
• Battery (in the iPac)
• A/C Adapter w/ Mini USB
• iPac Pachymeter Charging Cradle
Note: If any of these items are missing, please contact the Reichert Customer
Service Department. Contact information can be found on the back cover of
this User’s Guide.
Carrying
Case
Shipping Box
iPac Charging Cradle
Shipping Box & Insert
Insert

16040-101 Rev. J 11
Instrument Setup (continued)
Parts Identification
1. Pachymeter
2. Measurement Tip
3. Control button
4. OLED Display
5. iPac Pachymeter Charging Cradle
Accessories & Spare Parts
User Guide (P/N 16040-101)
Carrying Case (P/N 16040-380)
Lanyard (P/N 13851-096)
Measurement Tip Cover (P/N 16040-027)
iPac Rechargeable Lithium Ion Battery (P/N 16042)
iPac Pachymeter Charging Cradle (P/N 16041)
A/C Adapter w/ Mini USB (P/N 16040-430) Including Country Specic Pin Connector*:
• North America (P/N 16040-410-001)
• Australia (P/N 16040-410-002)
• United Kingdom, Hong Kong, Singapore (P/N 16040-410-003)
• European Union, South America (P/N 16040-410-004)
• Korea (P/N 16040-410-005)
• Argentina (P/N 16040-410-006)
• China (P/N 16040-410-007)
• India (P/N 16040-410-008)
Optional Accessories
iPac Bluetooth Printer (P/N 16043)
Spare Printer Paper (5 pack) (P/N 12441)
* When ordering a replacement A/C Adapter, the corresponding Country Specic
Pin must be orders as well.
1
4
3
2
iPac Pachymeter
iPac Pachymeter
Charging Cradle
5

12 16040-101 Rev. J
Instrument Setup (continued)
Icon Description
Move the Control button forward to go UP
Move the Control button back to go DOWN
Move the Control button left to go LEFT
Move the Control button right to go RIGHT
Press and hold the Control button for the indicated time
Press the Control button once and then release it
Bluetooth ON, but not connected
Bluetooth ON, Bluetooth Connected
Printer Connected
Printer Not Connected
Clear
Battery Requires Charging
Battery Low Power
Battery Fully Charged
Battery Charging

16040-101 Rev. J 13
Instrument Setup (continued)
Charging the iPac Pachymeter
WARNING: CARE MUST BE TAKEN TO ARRANGE THE CABLES FOR THE
ACCESSORIES SUCH THAT THEY DO NOT PRESENT A TRIPPING HAZARD TO THE
EXAMINER OR A DANGER TO THE PATIENT.
WARNING: POSITION THIS INSTRUMENT SO THAT IT IS NOT DIFFICULT TO OPERATE
THE DISCONNECTION DEVICE (PLUG).
CAUTION: USE ONLY THE SUPPLIED CHARGER PROVIDED WITH THE UNIT. IT IS
RECOMMENDED THAT THE IPAC BE ATTACHED TO ITS CHARGER (OR CHARGING
BASE) WHEN NOT IN USE TO ENSURE PROPER OPERATION.
CAUTION: DO NOT ATTEMPT TO CHARGE THE IPAC OR POWER THE CHARGING
CRADLE USING THE USB PORT OF A COMPUTER OR DAMAGE TO THE IPAC OR
COMPUTER MAY OCCUR.
The iPac can be charged directly with the Charging Cradle or the A/C adaptor. In
either case, it is important to be sure that the Mini USB Plug is correctly oriented to the
Mini USB Port, either on the iPac or the Charging Cradle.
With a Charging Cradle
Note: Initially charge the unit for 10 hours.
Note: The Mini USB Port and the Mini USB Plug have a at
side and a curved side. The at side of the Plug has a
small rectangular cutout visible from the at side. When
connecting the Plug to the Port, be sure that the at side
of the Plug is lined up with the at side of the Port.
CAUTION: IF THE MINI USB PLUG IS NOT ALIGNED
PROPERLY WITH THE MINI USB PORT, THE PORT MAY BREAK
OFF AND THE PLUG MAY BECOME DAMAGED.
Note: It is important to initially charge the iPac Pachymeter
for the recommended period of time to ensure correct
operation.
Note: The iPac comes with a mini USB port cap installed in the mini USB port hole.
This should remain in the iPac to help ensure the iPac properly sits on the cradle.
1. Plug the A/C Adaptor with Mini USB into an appropriately volted outlet.
2. Connect the Mini USB charging cord to the Charging Cradle.
3. Place the iPac on the Charging Cradle.
-continued-
Correct
Incorrect
Plug
Port
Plug
Port
With Charging
Cradle

14 16040-101 Rev. J
Instrument Setup (continued)
Charging the iPac Pachymeter (continued)
Without a Charging Cradle
Note: Initially charge the unit for 10 hours.
Note: The Mini USB Port and the Mini USB Plug have
a at side and a curved side. The at side of the
Plug has a small rectangular cutout visible from the
at side. When connecting the Plug to the Port, be
sure that the at side of the Plug is lined up with the
at side of the Port.
CAUTION: IF THE MINI USB PLUG IS NOT ALIGNED
PROPERLY WITH THE MINI USB PORT, THE PORT MAY
BREAK OFF AND THE PLUG MAY BECOME DAMAGED.
Note: It is important to initially charge the iPac
Pachymeter for the recommended period of time to
ensure correct operation.
Note: The iPac comes with a mini USB port cap installed in the mini USB port hole.
This needs to be removed before charging directly.
1. Plug the A/C Adaptor with Mini USB into an appropriately volted outlet.
2. Connect the Mini USB charging cord to the iPac Pachymeter.
Power Up Mode
Pressing the Control button initiates the iPac, the display will show “Press button to
measure,” after about one minute of inactivity, the iPac will go into sleep mode, the
display will turn off. To wake up the iPac press the control button and the display will
light up.
Measurement Mode
In this mode the iPac has about 15 seconds to start the measurement
process, if no measurements are taken then the display will show
“Measurement Timeout” and then revert back to the “Press button to
measure” display.
Sleep Mode
The iPac will automatically go into a power saving sleep mode after
a period of inactivity, the display will turn off. Press the control button
to exit the sleep mode and resume operation. There is no ON/OFF
switch on this instrument.
Correct
Incorrect
Plug
Port
Plug
Port
Without Charging
Cradle

16040-101 Rev. J 15
iPac Setup Menu
The iPac setup menu enables the user to select the options that are preferred when
using the pachymeter. Press and hold ( )the Control button for three seconds to
display the Setup menu.
At the top of the Display is a menu title (e.g., SETUP). If there is a small arrow on
the left or right, moving the Control button LEFT or RIGHT will navigate through the
menu screens in accordance with the arrows. Selecting the LEFT arrow displays the
previous menu screen. Selecting the RIGHT arrow displays the highlighted selection.
Selecting options in the menu screens is performed by moving the Control button UP,
DOWN, LEFT, or RIGHT until the desired option is selected (highlighted). Press ( )
the Control button to activate the desired option.
The iPac SETUP screens are the following:
• Bluetooth
• Date/Time
• Display
• About
• Exit
In the Setup menus there are options that will have specific colored indicator icons.
The colors are:
Green Icon - Indicates this option is turned On.
Gray Icon - Indicates this option is turned Off.
Yellow Icon - Indicates this option is in the process of turning On.
Instrument Setup (continued)

16 16040-101 Rev. J
iPac Setup Menu (continued)
Bluetooth
The Bluetooth screen has three options:
• Bluetooth - Press the control button to turn the Bluetooth
option ON or OFF.
• Search - Highlight the search option and press the control
button to nd any Bluetooth printer in the immediate area such
as the iPac Bluetooth printer. The display will show the devices
that have been discovered. (See printing section in this guide
for connection instructions for the iPac Bluetooth printer.)
• Detectable - This option allows the user to connect with a
computer for electronic medical record data transfer.
Date/Time
The Date/Time menu is used to change the date and time format
and also to set the current date and time, this will be printed with
the measurement data.
Display
The display menu options are:
• The eye can be set to either OD/OS or Right/Left (R/L).
• IOP Correction can be set ON or OFF.
• Standard Deviation can be set ON or OFF.
• Locks the screen viewing orientation.
• Sets the contrast on the display.
• Sets the operating language.
Note: Move the control button down to access the language op-
tion.
About
Displays the serial number and the software revision of the iPac.
Exit
Exits the Setup menu and returns to the Measure screen.
Instrument Setup (continued)

16040-101 Rev. J 17
iPac Menu Options
Bluetooth
Enable the following options by pressing ( ) the
Control button. The status indicators on the iPac
indicate the following:
• Green - The Bluetooth function is ON.
• Gray - The Bluetooth function is OFF.
• Yellow - The iPac is enabling the Bluetooth function.
Note: If you are not using the Bluetooth feature, turn this option OFF. This will extend
the battery life of the iPac.
Search
To perform a search for Bluetooth printing devices, perform the
following:
1. Press ( ) the Control button and the iPac searches the
local area for Bluetooth devices.
2. When the iPac is searching for a Bluetooth device the
Bluetooth icon will blink. After the icon stops blinking, the iPac
has completed its search and displays the available devices.
3. Highlight the Bluetooth device using the UP or DOWN icon
and press ( ) the Control button. The Bluetooth icon will
start blinking. After it stops blinking the iPac will display if the
Bluetooth device is connected.
Note: When the Bluetooth is connected a message is displayed
“Bluetooth Connected.” If the connection was unsuccessful
then a message is displayed indicating
“Bluetooth Connection Failed.”
4. If the connection was unsuccessful, ensure that the printer has power to it and
then repeat the Bluetooth connection process.
Note: When a connection is made to a Bluetooth printer, the connection information
is stored in the iPac. Whenever Bluetooth is turned on and no other
connection has been made, the iPac will attempt to reconnect to the same
printer.
Instrument Setup (continued)
Green
Gray

18 16040-101 Rev. J
Instrument Setup (continued)
iPac Menu Options (continued)
Bluetooth (continued)
Detectable
The Detectable mode sets the iPac in a mode that allows
communication with a Bluetooth compatible computer. When this
mode is selected, the green color is set ON and the iPac is available
to connect to a computer, however, the connection must be
established by the computer to enable the transfer of data.
The iPac’s Bluetooth passkey is shown at the bottom of the display when the
Detectable mode is active The computer may request this passkey code when
attempting to connect to the iPac.
Note: The iPac can only have one active Bluetooth connection at a time. If a
SEARCH is performed while DETECTABLE mode is active, the DETECT-
ABLE mode will be turned OFF and any Bluetooth connection with the com-
puter will be lost. If DETECTABLE is activated while the iPac has a Bluetooth
connection to a printer, the printer connection will be lost.
After the computer connection is established, the iPac can send data to the computer
using the PRINT command. Please contact your EMR/EHR
software provider, so that they can help configure your system to
allow Bluetooth connectivity.
About
The About screen displays the following information:
• Serial - displays the serial number of the unit.
• Revision - Provides the revision of the operating software of the iPac.

16040-101 Rev. J 19
iPac Menu Options (continued)
Date/Time
The Date and Time format can be changed in
Setup.
• Date Format
Sets the month, day and year format.
• 12 or 24
Sets the option to display the hours in
12 hour or 24 hour format.
• Set
Allows the user to set the current date and time.
To make changes to the Date/Time:
1. Highlight the option you want to change with the control button, move up ( )
and down ( ) the menu screen.
2. Press ( ) the control button and the display will change to show the available
options.
3. Highlight the new option, moving up ( ) and down ( ) the menu.
4. To select the new option press ( ) the control button in and the option is
selected and the display will return to the main Date/Time screen.
5. To make changes to the date and time value use the control button up ( ) and
down ( ) function and then move to the next value by
using the right ( ) or left ( ) function. Once all changes are made, press
() the control button in and the display will return to the main Date/Time
menu.
Instrument Setup (continued)

20 16040-101 Rev. J
iPac Menu Options (continued)
Display
The Display screen allows changes to the following options:
• Eye:
Displays the selected eye as OD/OS or R/L.
OD = Right Eye.
OS = Left Eye.
• IOP Corr:
IOP Correction value is displayed if the Option is set
ON. The option is indicated by a green or gray icon
next to the option (Gray is OFF, Green is ON). An IOP
adjustment table is shown in Appendix A.
• Std Dev:
Displays the standard deviation for the CCT
measurement. If this option is set OFF, then no
standard deviation is displayed
(Gray is OFF, Green is ON).
• Lock:
The display will change orientation as the instrument
is rotated if this option is OFF. If the option is ON, the
orientation of the display remains the same even if the
instrument is rotated (Gray is OFF, Green is ON).
• Contrast:
Sets the contrast level of the display. Use the UP and
DOWN Control button function to change the contrast
of the screen.
• Language:
Sets the language of the instrument. Languages
available are: English, German, French, Spanish,
Portuguese, Italian.
Instrument Setup (continued)