AMG AMG510-24G Series User manual

www.amgsystems.com
AMG510
amgsystems.com
AMG Systems Ltd. 3 The Omega Centre, Stratton Business Park, Biggleswade, Bedfordshire, SG18 8QB, UK
T :: [phone] E :: [email protected]
D39210-00
AMG510-24G Series
1Gb Layer 2+ Ethernet Switch
Installation Manual - Hardware
DEVICE RESET PROCEDURE
CONNECTING TO THE SWITCH
①Remove all connections from
the RJ45 & SFP ports.
②Insert an Ethernet patch cable
between ports 1 & 2 on the switch.
③Power cycle the switch with the loop-back
cable in place and the switch will reboot and
apply the factory default conguration settings.
④Remove the loop-back cable and re-connect
the existing Ethernet and optical patch cables.
To access the full software user guide for this product
please visit the product page using the QR code
opposite or the direct link below:
amg-support.com/AMG510-24G_Series
Web GUI
Default IP Address: 192.168.1.101
Username: admin
Password: admin
Console CLI
RJ45 to DB9 Cable 115200,8,N,1

AMG510-24G SERIES MODELS DESKTOP INSTALLATION
RACK MOUNT INSTALLATION
①Attach the rack ears using
the screws provided as shown.
②Secure the unit into the 19inch rack
using four cage nuts (not supplied).
①Attach the rubber feet supplied
as shown to prevent scratches.
PORTS & LED INDICATORS
LED Colour Description
POWER Yellow Power On
LINK/ACT Green Link present (ashes with data
trac activity)
1000M Yellow Port is connected at 1Gb speed
POE Yellow PoE is enabled on the port*
AMG510-24GAT-2C-P460
24x 10/100/1000T(x)
Ports
LED’s Console
Port
2x 100/1000Fx Ports or
10/100/1000T(x) / SFP Combo
Product Label IEC Mains Input
& Switch
* If a PD is connected and the switch exceeds the maximum PoE budget the PoE LED will start
blinking. In this case no power will be provided and the user must allocate power manually.
Model Description
AMG510-24G-2S 24 × 10/100/1000T(x) Ports + 2 × 100/1000Fx SFP Ports
AMG510-24GAT-2C-P460 24 × 10/100/1000T(x) Ports With 30W PoE+ (460W Budget)
+ 2 × 10/100/1000T(x) or 100/1000Fx SFP Combo Ports
AMG510-24G-2S
2x Cooling Fans*
*PoE Models Only