AMG MG510-4G-24S-4XS User manual

www.amgsystems.com
AMG510
amgsystems.com
AMG Systems Ltd. 3 The Omega Centre, Stratton Business Park, Biggleswade, Bedfordshire, SG18 8QB, UK
T :: [phone] E :: [email protected]
D39211-00
AMG510-4G-24S-4XS
10Gb Layer 2+ Ethernet Switch
Installation Manual - Hardware
DEVICE RESET PROCEDURE
CONNECTING TO THE SWITCH
①Remove all connections from
the RJ45 & SFP ports.
②Insert an Ethernet patch cable
between ports 25 & 26 on the
switch.
③Power cycle the switch with the loop-back
cable in place and the switch will reboot and
apply the factory default conguration settings.
④Remove the loop-back cable and re-connect
the existing Ethernet and optical patch cables.
To access the full software user guide for this product
please visit the product page using the QR code
opposite or the direct link below:
amg-support.com/AMG510-4G-24S-4XS
Web GUI
Default IP Address: 192.168.1.101
Username: admin
Password: admin
Console CLI
RJ45 to DB9 Cable 115200,8,N,1

Cooling Fan
AMG510-4G-24S-4XS MODELS DESKTOP INSTALLATION
RACK MOUNT INSTALLATION
①Attach the rack ears using
the screws provided as shown.
②Secure the unit into the 19inch rack
using four cage nuts (not supplied).
①Attach the rubber feet supplied
as shown to prevent scratches.
PORTS & LED INDICATORS
LED Colour Description
POWER Yellow Power On
LINK/ACT Green Link present (ashes with data
trac activity)
1G Green Port is connected at 1Gb speed
O Port is connected at 100Mb speed
24x 100/1000Fx
SFP Ports
LED’s Console
Port
4x 1/2.5/10Gb
SFP+ Ports
Product Label IEC Mains Input
& Switch
Model Description
AMG510-4G-24S-4XS 4 × 10/100/1000T(x) Ports + 24 × 100/1000Fx SFP Ports +
4 × 1/2.5/10G SFP+ Ports
Cooling Fan
4x 10/100/1000T(x)
Ports
Earth Point
12-48 VDC @ 50W
Redundant Power
+-