amiad Arkal 014000 Series User manual

0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0 5 10 15 20 25 30 35 40 45 50 55 60
DP [Bar]
FLOW RATE [m³/h]
7
654
3
2
1
Arkal 3” Twin Lite Filter with a detachable spine
Catalog No. 014000-******Threaded BSPT
Threaded NPT
Victaulic
Arkal Flange
Features
Inlet / Outlet options 3”- VIC, AR-Flange, Threaded
Parts in contact with water are made of polypropylene
Highly resistant to corrosion
Detachable spine
Pressure differential disc compression
Available in various filtration grades
Unique polymeric clamp
Drain ball valve
Technical Data
3” Arkal Flange / Threaded / Grooved
Inlet/Outlet diameter
116 psi
8 bar
Max. Pressure
220 gpm
50 m3/h (13.9 l/sec)
Max. Flow rate 400-100 micron
176 gpm
40 m3/h (11.1 l/sec)
70 micron
150 gpm
34 m3/h (8.9 l/sec)
55 micron
70 gpm
16 m3/h (4.4 l/sec)
20 micron
294 in2
1900 cm2
Filtration area
150 in3
2450 cm3
Filtration volume
8 27/32”
225 mm
Filter width W
28 3/4"
730 mm
Filter length L
12 19/32”
320 mm
Distance between connections A
14 lbs
6.3 Kg
Weight (Victaulic, Threaded)
17 lbs
7.8 Kg
Weight (Flanged)
140º F
60º C
Maximum temperature
2-13
pH
Filtration Grades Headloss Chart
1 - Blue (400 micron / 40 mesh)
2 - Yellow (200 micron / 80 mesh)
3 - Red (130 micron / 120 mesh)
4 - Black(100 micron /140 mesh)
5 - Brown (70 micron)
6 - Green (55 micron)
7 - Grey (20 micron)
AK 3” TWIN LITE 910101-000051-EN 07/2013
W
A
A
L

Installation Recommendations
Dismantling Assembly
1. Turn off the water.
2. Release the pressure through the drainage ball valve.
3. Open the filter clamp and remove the cover.
4. Unscrew and remove the filter element.
5. Wash the filter element.
6. If the filter discs require acid treatment you may dip the complete
filter element in acid according to our recommendation.
1. Place the filter element, turn clockwise
until secure. Verify that the filter element
is tightened in place.
2. Place the cover and attach the clamp.
Verify that the clamp is securely locked.
Winterization:
To prevent filter damage due to freezing water - drain all the water from the filter and leave the drain valve open.
Part List
No.
Cat. No.
Description
Materials
1
710101-000049
Filter cover
PP
2
770102-000048
O-ring 2-361(151.77x5.33)
EPDM
3
700190-000220
Clamp
RPA
4
700101-* * * * * *
Filter element * * * Micron
PP
5
770104-000045
Gauge port seal
EPDM
6
710101-000148
Gauge port nut
RPP
7
730104-000217
½" ball valve
BRASS
8
700190-000114
Body + flanges Assembly
-
700190-000108
Body grooved Assembly
-
700190-000103
Body threaded BSPT Assembly
-
700190-000104
Body threaded NPT Assembly
-
9
710101-000144
Ring flange 3"
RPA
10
710101-000135
Cone flange
POM
11
770104-000034
Gasket 3"
EPDM
12
700190-000223
Flange complete
-
Materials
PP - POLYPROPYLENE
RPA - REINFORCED POLYAMIDE
RPP - REINFORCED POLYPROPYLENE
POM - ACETAL
Note:
This filter is equipped with a pressure safety device. If pressure exceeds the maximum work pressure, the seal will act as
a pressure release element. If such occurs, please open the clamp, place the seal on the cover and reassemble.
Before opening the filter clamp, check that there is no pressure on the filter.
SUPPORTLEG
3"PIPE
PRESSURE GAUGE
PORTS
IN
OUT
OUT IN
3"MANUAL VALVE3"LITE FILTER
3/4"VALVE
SUPPORTLEG
3"PIPE
PRESSUREGAUGE
PORTS
IN
OUT
OUT IN
3"MANUAL VALVE3"LITE FILTER
3/4"VALVE
AK 3” TWIN LITE 910101-000051-EN 07/2013
11
10
9
12
5
6
7
8
4
3
2
1

AMIAD LIMITED WARRANTY
This certificate applies to Amiad Products purchased by You from Amiad or an Amiad authorized Distributor
(“Distributor”). This limited warranty extends only to the original purchaser, and is not transferable to anyone who
subsequently purchases, leases, or otherwise obtains the Product from the original purchaser.
1. Amiad hereby warrants that the Products are and will be free from defects in material and workmanship under
normal use and service. Amiad warrants that it will correct manufacturing defects in the Products, in accordance
with the conditions set out in this warranty.
2. This warranty is enforceable for a period of 12 months after the date Bill of Lading or equivalent (the “Warranty
Period”).
3. In the event that during the Warranty Period the Distributor discovers a defect in material and/or workmanship in
any Product or part (the “Defective Product”), it shall submit a written complaint to Amiad using Amiad's standard
customer complaint form. For the receipt of the customer complaint form, the submission of the complaint or any
questions please contact your customer service representative.
4. Upon written demand by Amiad the Distributor shall return the Defective Products –or a sample thereof –to
Amiad, at Amiad's cost. If the customer ships any such Product, Amiad suggests the customer package it securely
and insure it for value, as Amiad assumes no liability for any loss or damage occurring during shipment. Provided
however that in the event Amiad determines that the warranty does not apply to such Product, Distributor shall
promptly reimburse Amiad for such cost (including freight and customs). Any returned Product or part must be
accompanied by the warranty certificate and the purchase invoice. It is clarified that the Distributor may not return
the Defective Product unless such return was coordinate and approved by Amiad in advance.
5. Amiad's obligation under this warranty shall be limited to, at its option, the repair or exchange, free of charge, of
the Product or any part which may prove defective under normal use and service during the Warranty Period. The
provision of a repaired or replacement Product during the Warranty Period will result in an extension of the
Warranty Period by an additional period of 12 months, provided that the total accumulated Warranty Period shall
in any event be no more than 18 months from the original Bill of Lading.
6. This warranty is valid on the condition that the Products are installed according to Amiad's instructions as
expressed in Amiad's instruction manuals and according to the technical limitations as stipulated in Amiad's
literature or as stated by a representative of Amiad.
7. This warranty will not apply to damaged or defective Products resulting from or related to:
(i) Fire, flood, power surges or failures or any other catastrophe/and or unforeseen occurrence, such as but not
limited to those for which the customers are customarily insured;
(ii) Fault, abuse or negligence of the customer;
(iii) Customer's responsibilities, including the failure of the intake water to meet the agreed standards, as set forth in a
written document, approved by Amiad or improper storage.
(iv) Improper or unauthorized use of the Product or related parts by the customer, including the customer’s failure to
operate the Product in conformity with the recommendations and instructions of Amiad, as set forth in Amiad's
manuals and other written materials, the operation of the Product other than by a trained and qualified operator,
or improper installation of the Product by a third party not authorized by Amiad;
(v) Performance by the customer of maintenance and other services other than by a trained and qualified advanced
operator, or other than in conformity with the recommendations and instructions of Amiad, or other than in
accordance with procedures defined in the literature supplied for Products;
(vi) Any alteration, modification foreign attachment to or repair of the Products, other than by Amiad or its authorized
technical representatives.
8. In no event shall Amiad be liable to the customer or any third party for any damages, including indirect, special,
exemplary, punitive or consequential damages, or lost profits arising out of or in connection with this warranty, or
arising out of or in connection with the Product's performance or failure to perform, even if it has been advised of
the possibility of such damages.
9. Amiad will be excused for failure to perform or for delay in performance hereunder if such failure or delay is due to
causes beyond its reasonable control or force majeure preventing or hindering performance.
10. The limited warranty set forth herein is the only warranty given by Amiad and is provided in lieu of any other
warranties created by any documentation, packaging or otherwise.
11. Amiad makes no warranty whatsoever in respect of accessories or parts not supplied by Amiad. In the event that
Amiad is required to correct a defective Product or product not covered by this warranty, it will do so solely in
consideration for additional fees.