AMOI H7 User manual

H7 User Manual
QRCode Payment Terminal

Unpacking inspection
Please check the packing list to check! If any defect, please
contact our relevant staff in time. (fuselage color, screen
printing in kind prevail!)
host
user manual
power adapter (optional)

Attention
01/Security considerations
1．please insert the plug of the ac power adapter on identifying input
corresponding to the ac outlet.
2．It is strictly prohibited in any potentially explosive gas.
3．Non-professional workers do not arbitrarily open the power adapter
to avoid danger.
4．Avoid during lightning installation or use, or are in danger of being
struck by lightning.
5．When you are found to have abnormal smell, overheat or smoke case,
please immediately cut off power supply.
02/Use daily matters needing attention
1．Not near the water or the supermarket
2．Don't use in extreme cold, heat environment, such as near the fire or
lighted cigarettes.
3．Don't fall off, throwing or bending.
4．Try to use in a clean environment, avoid small items into the terminal.
5．Without permission, do not use in medical equipment accessories.
6. Not on the plane, and any other banning the use of radio
communication functions use with wireless communication function of
the model.

03/The statement
Hante Corp. is not responsible for the following behaviors: no instructions
for this guide under the conditions of use and maintenance of the damage
caused by the.

Product Introduction
Quick Pass area
LCD Display
Key
Micro USB interface
Scan
Speaker
Scan button
Battery cover/SIM
card area

Sweep code operation
Terminal can support with cashier mode

Install the SIM card
According to legend way to open the SIM card buckle
According to legend missing Angle tip into the SIM card
务必 It is important to the above operations can be performed at the
bottom of the equipment shutdown state
This machine uses the standard SIM card

Install the lithium battery
01/Install and replace the battery
1．The product must be equipped with batteries to normal use.
2．Please use the original battery.
3．The installation must be performed by illustrations, wrong operation
may cause damage of the battery.
02/Recharge the battery
Before using POS, please press the following method to recharge the
battery, so that the POS play the best performance;Insert the adapter,
power supply is connected by POS power interface
FLG. 1
When installing the battery
to the battery connector
and terminal connection.
FLG. 2
To dismantle battery when
the battery connector and
terminal from the first.

Turn on/off the terminal
Turn on：Hold the“”2 seconds, the main screen
back light, loosen the button, powered up for
the terminal.
Turn off: Hold the “”2 seconds, the main screen
off pop-up prompts, loosen the button,
terminal finish after 1 second to turn it off.
Note: If there are any crash, please hold off button 5-
6 seconds, eventually turned off.
Common troubleshooting
01/Terminal charge, use time significantly shortened
Terminal batteries fully charged.
02/Terminal flicking code does not success or the
success rate is low
Check the sweep code, the qr code is off or not in the scanning area.
03/Communication failure
Whether to insert SIM card, check card contact is polluted to try to
establish communication.

The name of poisonous and harmful material
content identification table for the product:
Part name
Poisonous and harmful substances or elements
Pb Hg Cd Cr(VII) PBB PBDE
Circuit board
components
X O O O O O
O means the toxic and harmful substances in the parts of content in all
homogeneous materials are limited in the SJ/T11363-2006 below
requirements.
X represents the toxic and harmful substances in the parts of at least
one homogeneous material is beyond the SJ/T11363-2006 rules in the
limited requirements;But the above table call "x: components, its content
is beyond because the industry is not mature alternative technologies.
To meeting or exceeding environmental protection use fixed number of
year of the products should be based on the control measures for the
management of electronic information products "regulation for recycling,
should not be discarded.

FCC ID
Amoi Mobile Co.,Ltd
FCC ID: 2AQ44-H7
Model: H7
This device complies with part 15 of the FCC rules.Operation is subject
to the following two conditions(1)This device may not cause harmful
interference,and(2)thisdevice must accept any interference
received,Including interference that may cause undersired operation.

Product warranty card
Product name：QRCode Payment Terminal
Product model: H7
Warranty terms:
1. Our company will provide you with high quality
after-sales service.
2. If user damage caused by man-made factors, the
company repair maintenance fee.
3. Please keep this card,the company will to warranty
as the basis.

01 / Copyright
This manual book for hunter company, author and preserve all the
copyright exclusive rights based on copyright law, by the author's
prior agreement, part or all of this manual may be engaged in copy,
add or delete, extract, reproduced, or copied.
The contents of this manual, only on the author of manufacturing
products, the use of.Content of the manual, hunter company author
without any express or implied warranty or guarantee responsibility.
02/ Warning
For any option or consumables (not the original product or recognition
products offered by our company) damage or problems, hunter
company will not undertake any responsibility.Have the right to modify
the products without the permission of the hunter company or change)
03/ Disclaimer
Because the product update, this document may not correspond with
the product's details, please refer to our physical, measuring the
temperature of final interpretation hunter company.Retain without
prior notice, modify the rights of this manual.

Hante Corp.
Brand: Hante Pay
Model:H7
Address:735 W Duarte Rd.#307, Arcadia,CA91007
Web : www.hanteccom
Customer service: [phone]

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Specific Absorption Rate (SAR) information:
This QRCode Payment Terminal meets the government's requirements for exposure to radio
waves. The guidelines are based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged
over one gram of tissue. Device types: QRCode Payment Terminal (FCC ID: 2AQ44-H7) has also
been tested against this SAR limit.