Infinite Peripherals Infinea Tab Lite User manual

Infinea®Tab Lite
USER MANUAL
For iPhone® 6/6s Plus/7Plus/8 Plus

USER MANUAL- INFINEA TAB LITE
2
Contact Information
Mobility Sales/ Technical Support Center
Innite Peripherals, Inc.
17681 Mitchell N
Irvine, CA 92614
Toll-Free: [phone]
Ofce: [phone]
Website: ipcmobile.com
Headquarters/ Main Warehouse
Innite Peripherals, Inc.
2312 Touhy Avenue
Elk Grove Village, IL 60007
Toll-Free: [phone]
Ofce: [phone]
Fax: [phone]
Compatible Devices
Legal Notice
“Made for iPhone” means that an electronic accessory has been designed to connect specifically to the iOS device and is certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use
of this accessory with an iOS device may affect wireless performance.
iPhone 6 Plus
iPhone 6s Plus
iPhone 7 Plus
iPhone 8 Plus
Trademarks
Infinite Peripherals, Mobilize Your Enterprise, Linea Pro, Infinea, Infinea Tab, and Infinea Omni are trademarks of Infinite Peripherals, Inc. All other trademarks are
the property of their respective owners.
iOS Compatibility

USER MANUAL- INFINEA TAB LITE
3
Table of Contents
Overview 4
Technical Data 4-5
Box Contents 6
Getting Started 6
Product Description 7
Attach iOS Device to Otterbox uniVERSE case 7
Battery Charging 8
Developing Infinea Tav Lite Apps 8
SRED Encrypted MSR Information 8
Operational Modes 9
Programmable Options 9
TUrn on the Infinea Tab Lite 10
Magnetic Stripe Reader 10
Read NFC Cards 10
Troubleshooting 11
Servicing the Infinea Tab Lite 12
Warranty 12
Disclaimer 12
Product Returns and Servicing 12
Symbols 13
Federal Communications Commissions 13

USER MANUAL- INFINEA TAB LITE
4
Visit our website at https://ipcmobile.com or contact your Innite Peripherals account representative for additional information about our current and
future product offerings.
Overview
The Infinea Tab Lite is a compact, enterprise-grade mobile payment device featuring a magnetic card reader and NFC contactless card reader. The Lightning™
cable connects the Infinea Tab Lite to you iOS device. In addition, the Otterbox uniVERSE case is designed for plus-size iOS devices
Technical Data
Features
Physical Dimensions
Battery
Standard feature: one Li-Po rechargeable battery 3.7V/500mAh.
Processor
ARM™ Cortex® M3 based Security Micro-controller
Magnetic Card Reader
Built-in magnetic stripe reader/ The card reader incorporates a
3-track, bi-directional magnetic read head, requiring a single swipe to
read eld data from all three tracks.
Compatibility
iPhone 6 Plus/6s Plus/7 Plus/8 Plus
Contactless Reader
Optional Near-Field Communication (NFC) tag/card reader with read
and write capability at 13.56 MHz.
Dimensions (L x W x H)
102.5mm x 75mm x 25mm (4.3in x 2.95in x 0.99in)
LED Indicators
LEDs for battery and device status indication and electro-magnetic
buzzer are included.
Weight
95g (3.35 oz.) without iOS device=
Accessories

USER MANUAL- INFINEA TAB LITE
5
Connectivity
Certifications
Environment
Temperature
Operation: -10°C to +40°C (14°F to +104°F)
Storage: -20°C to +50°C (-4°F to +122°F)
Relative Humidity
Operation and Storage: 5%-90%
CE, FCC, MFI, PCI, PTS 5.x, EMV Contactless Level 1
Battery Capacity
Rechargeable Li-ion Battery 3.7V/500mAh, charging from Lighning
port or charging station
Magnetic Stripe Reader
3-track bi-directional reader
Type: ISO 7810, 7811, 7813
1,000,000 magnetic card swipes
Near-Field Communication (NFC)
ISO/IEC 14443 Type A/MIFARE
MIFARE MINI
MIFARE CLASSIC-1K, MIFARE CLASSIC-4K
MIFARE ULTRALIGHT, ULTRALIGHT-C
MIFARE PLUS 2K/4K
DESFire card
And others
ISO/IEC 14443 Type B – supports most cards
ISO/IEC 15693 – supports most cards
• AMEX ExpressPay MagStripe and EMV
• Discover ZIP and D-PAS
• MasterCard PayPass MagStripe and M/Chip
• VISA PayWave MSD and qVSDC
Power Supply
5V through Lightning™ Connector
5V through single charger
Indicators
Visual battery status: 4 LEDs
Audio: electromagnetic buzzer
Port
Lightning port for charging
Buttons
One On/Off button

USER MANUAL- INFINEA TAB LITE
6
Box Contents
• Before using your Linea Pro 7i, remove the unit and any included accessories from the shipping carton and verify the contents against the packing list.
• Retain all packing materials, invoice, and bill of lading. These may be required to return the device for servicing later, or to process a claim with the
shipping carrier.
• Carefully inspect the contents inside of the packaging for any signs of damage. If there are signs of damage, do not attempt to use the unit. Notify your
account executive or contact technical support at https://ipcmobile.com/devices.
• Ensure the battery is fully charged prior to initial use.
• The unit includes a Li-Po rechargeable battery, Lightning™ receptacle port, and charging pads.
These items are included with your unit:
Infinea Tab Lite (1)
Getting Started
The Innea Tab Lite allows you to transact credit card payments via the magnetic stripe reader and NFC contactless card reader, and pass that data onto
compatible iOS applications.
The following helps you get the Innea Tab Lite ready for use:
What to do Section
Assemble the Innea Tab Lite with your iOS device Assembling Your Innea Tab Lite
Fully charge battery before rst use Charging Your Innea Tab Lite
Software required to operate the unit with your iOS device Developing Applications for Your Innea Tab Lite
Initializemagnetic stripe reader and NFC functionality Turn on Your Innea Tab Lite
Note:
Use of the Near-Field Communication (NFC) features requires the installation of software. Contact your Innite Peripherals account representative for
available software.

USER MANUAL- INFINEA TAB LITE
7
Product Description
Attach iOS Device to Otterbox uniVERSE Case
1. Contactless Reader
2. Indicators for Contactless transactions/LEDs for device status
3. Magnetic Card Reader
4. Lightning™ Connector
1. Insert your iOS device into the Otterbox uniVERSE case.
5. On/Off Button
6. Charging Contacts
7. Lightning Receptacle Port
8. Battery Charging Indicator
2. Turn the iOS device face up, and then slide it onto the Lightning
connector.

USER MANUAL- INFINEA TAB LITE
8
Battery Charging
Before rst use, encure the battery is fully charged.
Your Innea Tab Lite is shipped with a Li-Po rechargeable battery, Lightning™ receptacle port, and charging pads. When attached, the iOS device can be
charged to a charging station or via the Lightning cable plugged into the Lightning port.
Use only the approved 5 volt, 2.1 amp DC adapters to charge the iOS device and Innea Tab Lite together. Failure to do so may result in problems charging
the unit and/or potential damage to the Innea Tab Lite and/or iOS device.
The charging current provided is based on the connected power source:
• Lightning port = 500mA
• Charging pads = 1000mA
Developing Infinea Tab Lite Apps
Software is not provided with your Innea Tab Lite. Please contact your reseller or Innite Peripherals for Third Party software solutions. Integrating the
Innea Tab Lite into your iOS application requires the use of the Innite Peripherals Universal Software Developers Kit (SDK).
The SDK incorporates an API specically for developing applications to use Innea Tab Litevv functionality.
For additional details on using the Innite Peripheral Universal SDK, please refer to the appropriate SDK documentation.
For the latest Innite Peripheral Universal SDK, please visit our developer portal at:
https://developer.ipcmobile.com
Note:
If fully discharged, the charging time is less than one hour and 30 minutes.
How to Charge Your Infinea Tab Lite
1. Gently connect the Lightning cable into the Lightning receptacle
on the side of the unit.
2. Do not force the Lightning charging cable as this may damage the
connector
SRED Encrypted MSR Information
The Innea Tab Lite requires proper maintenance to ensure long and trouble-free operation to integrate the PCI PTS 5.x SRED-certied unit into your
solution. This includes maintaining a proper battery charge to prevent the Innea Tab Lite from entering Tamper Detect mode. When the battery is depleted
or removed, the magnetic read head security feature is disabled and renders the unit unusable.
To prevent downtime, do not allow the battery to fully deplete, or remove the battery from the unit, and always place it on a charging station when not in use
for extended periods.
Note:
If the security features are disabled or the battery is fully discharged and is in Tamper Detect mode, the unit must be sent back to Innite Peripherals for
servicing.

USER MANUAL- INFINEA TAB LITE
9
Programmable Options
Congure these optional settings via the SDK.
Operational Modes
Before using your Innea Tab Lite, the iOS device must be attached and the applications must be installed. Refer to Developing Apps for more information.
Charging Current
Charging current may be set to 500mA (default) or 1A.
Bootloader/Application Download
Press and maintain the Power button on the Infinea Tab Lite to access the boot loader/application download mode for the firmware. You’ll hear a buzzer when the
first LED is lit. When the second, white LED is lit, release the Power button. You’ll hear a buzzer when the device is in the application download mode.
Pass-Through Sync
When enabled and the Lightning cable is plugged in, the iOS device is with a Windows computer or an Apple MacOS.
When syncing is required, enable the Pass-Through Sync setting in the SDK. When this setting is disabled and the cable is plugged in, the Infinea Tab Lite only
charges.
System Mode
Press and maintain the Power button on the unit to access System Mode. You will hear a buzzer when the first LED is lit. When the third LED is lit, release the
Power button.
Time Out
Default setting is 60 seconds.
Maximum is 5400 seconds (90 minutes).
LED Operating Modes/System Errors
#1 On
Plus #4 Flashing
Normal operating mode
Tampered State
#2 On Application download mode
#3 On System Mode
Icon Status
Solid white icon indicates unit is turned off
Solid green means battery is charging
Flashing green indicates battery is fully charged
The LEDs on the Infinea Tab Lite indicate conditions of operation,
including active connection, and charging conditions. These conditions
and their corresponding LED indication are

USER MANUAL- INFINEA TAB LITE
10
Magnetic Stripe Reader
(MSR)
The built-in magnetic stripe reader (MSR) has a three-track bi-
directional encryption-capable magnetic read head. A single swipe
reads information from all three tracks.
• To read card cata, swipe a card with an even sliding motion.
• The magnetic card must face in the same direction as the face of
the iOS device.
• Keep the edge of the card at on the inner back of the stripe
reader to ensure the magnetic stripe passes over the read head
evenly.
Read NFC Cards
The NFC receiver/transmitter is located on the back of the unit, below
the LEDs, and is denoted by the WiFi symbol.
1. Tap the contactless card reader option in the iOS application.
2. Place the NFC card/tag over the NFC label on the transmitter/
receiver, keeping the face of the card at on the transmitter and
as close as possible.
3. Remove the card/tag after the display indicates the transaction
is complete. The data is sent from the reader to the iOS device.
Note:
Depending on the type of NFC card/tag, it may be necessary
to make direct contact with the surface of the receiver/
transmitter for proper reading/writing.
Turn on the Infinea Tab Lite
1. Press the On button on the side of the unit.
2. Hold the button until you see the rst three LEDs illuminated,
and then release the button.