AMP Research BedStep2 User manual

20-03797-10
19-03783-90
19-03563-90
11-03639-90
Ford F150
(Fits all Beds /Cabs)
2009-Current
19-03341-90
19-03810-90
Brackets must be configured for Passenger or Driver-Side as shown.
15-03801-90 15-03802-90
Torque wrench
13mm 15mm
PART NUMBER:
75402-01A
Passenger-Side OrientationDriver-Side Orientation
T25 Torx
Using a 15mm Socket assemble Lateral mount onto
Linkage assembly. Do not tighten bolts yet. Note:
Drivers side shown. Mirror for passenger side.
15mm
Using a 13mm Socket assemble Frame mount onto
Lateral mount. Torque bolts to 16 ft-lbs.
13mm
1
2 3

Insert two U clips into cutouts in frame. Mulitiple
cutouts will be present on some models. Use set
closest to rear tire.Note: Image shows Crew Cab
short bed. Bed mount may not be present in other
applications.
Set linkage in place and tighten bolts using a 15mm
socket. Torque bolts to 20 ft-lbs.
Note: Image shows Crew Cab short bed. Bed mount
may not be present in other applications.
Offset the step pad forward and secure using pro-
vided PT Screws. Tighten to 5 ft-lbs using T25 torx bit.
Note: Drivers side shown
Adjust step pad to be in line with fender and torque
bolts from Step 2 to 20ft-lbs.
To deploy the step, press down using your foot on the
outside edge of the step pad.
To retract, gently kick up on the underside of the step
pad.
4
6
5
7
89
SIDE STEPS
AMP RESEARCH RUNNIG BOARDS