Amphenol C10-730187-X2XX User manual

Amphenol
Industrial Operations
Amphenol Technology (Zhuhai) Co., LTD.
Amphenol Technology (Zhuhai) Co., LTD
No.63, Xinghan Road, San ao Town, Jinwan, Zhuhai, PRC, 519040
http://www.amphenol-industrial.com
Document NO
.
ATZ
-
WI
-
201906
-
002
Date 20190604
Rev.
F
The Assembly Work Instruction
装配作业指导书
5.7mm Surlok Plus Receptacle Connector Screw Type
5.7mm Surlok+ 插座连接器螺纹类
C10-730187-X2XX

Part 1 Package contents
第一部分：包装清单
Receptacle connector 插座连接器
Notes There will be no gasket when no sealing requirement.
备注 无防水要求时不提供橡胶垫.

Part 2 Receptacle assembly
第二部分：插座组装
Step 1 Tighten M6 nut onto Busbar (recommended torque is 1.5~2.0N.m)
步骤1：拧紧M6螺母 (推荐扭矩1.5~2.0N.m）
a: Receptacle tail (studs side) pass through the hole of mounting panel
插座尾部(螺柱)穿入安装面板孔内
b: Studs pass through copper busbar and washer and nut in proper order
螺柱依次穿入铜排,防松垫圈,螺母
c: Tighten nut by tool
使用工具拧紧螺母

Step 2 Tighten receptacle onto the panel with M4 bolts (recommended torque is 0.4~0.7N.m)
步骤2：使用M4螺栓将插座固定在面板上(推荐扭矩0.4~0.7N.m)
(1. Recommended M4 bolts refer to QB/T70.2-2015）
推荐使用QB/T70.2-2015标准的M4螺栓。
(2. Recommended M4 Spring washer refer to BS 4464 1969(2004) )
推荐使用BS 4464 1969(2004)标准的M4弹簧垫片。