Amprobe SOLAR-100 User manual

Users Manual




SOLAR-100
Solar Power Meter

SOLAR-100
Solar Power Meter
Users Manual
July 2009, Rev.1
©2009 Amprobe Test Tools.
All rights reserved. Printed in China
English


Your Amprobe product will be free from defects in material
and workmanship for 1 year from the date of purchase. This
warranty does not cover fuses, disposable batteries or damage
from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not
authorized to extend any other warranty on Amprobe’s behalf.
To obtain service during the warranty period, return the product
with proof of purchase to an authorized Amprobe Test Tools
Service Center or to an Amprobe dealer or distributor. See Repair
Section for details. THIS WARRANTY IS YOUR ONLY REMEDY.
ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR
STAUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR
A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY
DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE FOR ANY
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES
OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some
states or countries do not allow the exclusion or limitation of an
implied warranty or of incidental or consequential damages, this
limitation of liability may not apply to you.

All test tools returned for warranty or non-warranty repair or
for calibration should be accompanied by the following: your
name, company’s name, address, telephone number, and proof of
purchase. Additionally, please include a brief description of the
problem or the service requested and include the test leads with
the meter. Non-warranty repair or replacement charges should be
remitted in the form of a check, a money order, credit card with
expiration date, or a purchase order made payable to Amprobe®
Test Tools.

Please read the warranty statement and check your battery before
requesting repair. During the warranty period any defective test
tool can be returned to your Amprobe® Test Tools distributor
for an exchange for the same or like product. Please check the
“Where to Buy” section on www.amprobe.com for a list of
distributors near you. Additionally, in the United States and
Canada In-Warranty repair and replacement units can also be sent
to a Amprobe® Test Tools Service Center (see address below).


Non-warranty repairs in the United States and Canada should be
sent to a Amprobe® Test Tools Service Center. Call Amprobe® Test
Tools or inquire at your point of purchase for current repair and
replacement rates.
In USA In Canada
Amprobe Test Tools Amprobe Test Tools
Everett, WA 98203 Mississauga, ON L4Z 1X9
Tel: 877-AMPROBE (267-7623) Tel: [phone]

European non-warranty units can be replaced by your Amprobe®
Test Tools distributor for a nominalv charge. Please check the
“Where to Buy” section on www.amprobe.com for a list of
distributors near you.
European Correspondence Address*
Amprobe® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germany
Tel.: [phone] - 0
*(Correspondence only – no repair or replacement available from
this address. European customers please contact your distributor.)

1
5
6
7
1
2
3
4
SOLAR-100 Solar Power Meter







1
2
4 7
3
5
6

1

...........................................................................2
Warning and Precautions .............................................2
 ........................................3
 .................................................................3
........................................................................4
..................................................................7
 ............................................8
 ..................................................8

2
3

Caution! Refer to the explanation in this Manual
Conforms to relevant Australian standards
Complies with European Directives
Do not dispose of this clamp meter as unsorted
municipal waste. Contact a qualified recycler for
disposal.

For your own safety and to avoid damaging the
instrument follow the procedures described in this
instruction manual and read carefully all notes preceded
by this symbol

• Avoid doing that in humid or wet places or using
in rooms where explosive gas, combustible gas,
steam or excessive dust is present.
• Avoid doing that if you notice anomalous
conditions such as breakages, deformations,
fractures, leakages of battery liquid, blind display
etc.
• Operating environment: for indoor use, expose to
pollution level II.
• Do not put this device in direct sunlight or where
it is hot and/or damp.
Remember to turn OFF the power after use. For
long storage, remove the battery to prevent the
battery from leaking to cause damage to the parts
inside.
• This is a precision device. During use or storage,
do not go beyond its spec. to prevent any possible
damage or danger

2
3

Your shipping carton should include:
1 SOLAR-100 Solar Power Meter
1 9 volt battery
1 User manual
If any of the items are damaged or missing, return
the complete package to the place of purchase for an
exchange.

The SOLAR-100 measures the solar energy and radiation,
the typical application for this model are:
• Transmission measurement is most suitable for
measuring the effectiveness of the solar film.
• Solar radiation measurement.
• Car windows light intensity measurement.
• Optimal incident angle for the solar panel.
• Measurement of the sun’s transmission through
transparent and film glass.
• Convenient, no need to adjust, data displayed
clearly.

4
5



• Use a screw driver to adjust the hole of “0 ADJ”
for the zero adjustment if any digits is appear
• If performing the zero adjustment after powering
on, several digits may not disappear. In this case,
perform the zero adjustment again.
• Measure your car’s headlights
• Turn ON your car’s headlights. Then turn ON
the SOLAR-100 meter, and “00.0” appears on
the screen. Put the device down close to the
headlights. Switch between high beam and low
beam, and light intensity values appear on the
screen. Both the right and left headlights must be
tested. Note the values and put them in your car
for reference. (Picture 1)
• Measure the effect of solar insulation of your
vehicle’s windows
• Press the “ ” button to turn ON the SOLAR-100
meter, “00.0” appears on the screen. Aim the
device at the sun and close to a window, and the
intensity appears on the screen. Open the window
and aim the device at the sun. Compare the value
against that acquired when the window is closed
to understand the efficiency of the window’s
solar film. Test your new car and preserve the
measurements in it. After that, test it at least once
every year. (Picture 1)
Picture 1.