manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Amprobe
  6. •
  7. Measuring Instrument
  8. •
  9. Amprobe VPC-20 User manual

Amprobe VPC-20 User manual

Other Amprobe Measuring Instrument manuals

Amprobe PRM-4 User manual

Amprobe

Amprobe PRM-4 User manual

Amprobe LM-200LED User manual

Amprobe

Amprobe LM-200LED User manual

Amprobe TMA-21HW User manual

Amprobe

Amprobe TMA-21HW User manual

Amprobe TDR-400 User manual

Amprobe

Amprobe TDR-400 User manual

Amprobe TIC 300 PRO User manual

Amprobe

Amprobe TIC 300 PRO User manual

Amprobe TMA10A User manual

Amprobe

Amprobe TMA10A User manual

Amprobe LCR55A User manual

Amprobe

Amprobe LCR55A User manual

Amprobe THWD-3 User manual

Amprobe

Amprobe THWD-3 User manual

Amprobe CO2-100 User manual

Amprobe

Amprobe CO2-100 User manual

Amprobe PQ55A User manual

Amprobe

Amprobe PQ55A User manual

Amprobe AMB-45 User manual

Amprobe

Amprobe AMB-45 User manual

Amprobe ACD-6 Pro User manual

Amprobe

Amprobe ACD-6 Pro User manual

Amprobe WT-30 User manual

Amprobe

Amprobe WT-30 User manual

Amprobe ACD-15 Pro User manual

Amprobe

Amprobe ACD-15 Pro User manual

Amprobe ACD-16 Pro User manual

Amprobe

Amprobe ACD-16 Pro User manual

Amprobe TACH-10 User manual

Amprobe

Amprobe TACH-10 User manual

Amprobe SOLAR-600 User manual

Amprobe

Amprobe SOLAR-600 User manual

Amprobe AD40B User manual

Amprobe

Amprobe AD40B User manual

Amprobe VPC-10A User manual

Amprobe

Amprobe VPC-10A User manual

Amprobe CR50A User manual

Amprobe

Amprobe CR50A User manual

Amprobe TMA40-A User manual

Amprobe

Amprobe TMA40-A User manual

Amprobe ALC-110 User manual

Amprobe

Amprobe ALC-110 User manual

Amprobe WT-60 User manual

Amprobe

Amprobe WT-60 User manual

Amprobe AT-6000 User manual

Amprobe

Amprobe AT-6000 User manual

Popular Measuring Instrument manuals by other brands

Suaoki D40 user manual

Suaoki

Suaoki D40 user manual

Elster BK-G1.6 operating instructions

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser Deltabar FMD71 technical information

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool D03128 manual

Duratool

Duratool D03128 manual

Vega VEGAPULS 65 Quick setup guide

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui TH2618B Operation manual

Tonghui

Tonghui TH2618B Operation manual

Tenmars TM-801 user manual

Tenmars

Tenmars TM-801 user manual

MSR 145 user manual

MSR

MSR 145 user manual

TPS WP-82 manual

TPS

TPS WP-82 manual

PCB Piezotronics 003C30 Installation and operating manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma 72-10465 manual

Tenma

Tenma 72-10465 manual

Endress+Hauser Proline Promag 50 Brief operating instructions

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens SITRANS F Coriolis FCT030 Function manual

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER CMF V Series instruction manual

KLINGER

KLINGER CMF V Series instruction manual

Keysight M8290A Getting started guide

Keysight

Keysight M8290A Getting started guide

Acterna MS1400 Operation manual

Acterna

Acterna MS1400 Operation manual

R&S ZPH manual

R&S

R&S ZPH manual

Datacolor ColorReader DC10-2 user guide

Datacolor

Datacolor ColorReader DC10-2 user guide

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

Digital Voltage and Continuity Tester
Model VPC-20
Instruction Manual
m Safety Information
• Never use the tester if it or test leads appear damaged.
• Never apply more than 600V DC or 600V AC rms. between any terminal and
earth ground
• When using the probes, keep your fingers behind the finger guard on
the probes.
• Turn off power to the circuit under test before cutting, desoldering, or
breaking the circuit. Small amounts of current can be dangerous.
• Use caution when working with voltage above 60V dc or 30V ac rms. Such
voltages pose a shock hazard.
Automatic Operation
The tester automatically turns on when you short the two test probes or place the
probes across a complete circuit.When turned on, the tester powers up in continuity
mode. If a dc or ac voltage greater than about 4.0V is present across the inputs, the
tester switches to dc or ac voltage mode.The tester automatically shuts down after
approx. 4 minutes of inactivity.
Continuity testing
Turn off circuit power before testing. Beeper indicates shorts lasting 1 ms or longer.
SHORT 10KΩ OPEN
Specifications:
Display: Large 1999 count LCD display with function and high voltage warning indication.
Maximum Voltage Between any Terminal and Earth Ground: 600V dc; 600V ac rms,
Over-voltage Category III 600V
Safety: Complies with EN61010-1:1993 for use in over-voltage CAT III environments
Pollution Degree: 2
For indoor use only
EMC Regulations: EN50081-1, EN50082-1
Polarity: Automatic, (-)negative polarity indication.
Over-range: “1” mark indication
Low battery indication: The “BAT” is displayed when the battery voltage drops below
the operating level
Measurement rate: 2 times per second, nominal
Continuity test: Audible threshold 0-10KW, Continuity beeper 2KHz
Input Impedance: 400KΩ
Temperature: 5 °C(41°F) to 40°C (104°F)
Altitude: Operating: 2000m; Storage: 10,000m
Relative Humidity: 80% for Temp up to 31C decreasing linearly to 50 % RH at 40C
Pollution Degree: 2
For indoor use only
Battery Type: AA (2) NEDA 15F or IEC R6
12V DC 240V AC
Measuring Voltage
Refer to Automatic Selection
DC Voltage (Volts dc>4.0V)
600V dc maximum
AC Voltage (Volts dc>4.0V)
600V ac maximum
50Hz to 400Hz
Function
Range
Accur acy(%rdg.+digits)
V AC(50Hz ~400Hz)
600V
+(2.9%+8)
V DC
600V
+(1.5%+2)
Continuity te st: Audible threshold 0~10KΩ,Continuity beeper2KHz.
Overl oad protection: AC/DC 600V
Diminsions/wt.:215x96.3x37.5mm/312g
Replacing the Batteries
If the sign “BAT” appears on the LCD display, it indicates that the batteries should be
replaced. Remove screws on the back cover and open the case. Replace the exhaust-
ed batteries with new batteries. (AA(2);NEDA 15F or IEC R6)
WARRANTY
Congratulations! Your new instrument has been quality crafted according to quality
standards and contains quality components and workmanship. It has been inspected
for proper operation of all of its functions and tested by qualified factory technicians
according to the long-established standards of our company.
Your instrument has a limited warranty against defective materials and/or workmanship
for one-year from the date of purchase provided that, in the opinion of the factory, the
instrument has not been tampered with or taken apart.
Should your instrument fail due to defective materials, and/or workmanship during this
one-year period, a no charge repair or replacement will be made to the original pur-
chaser. Please have your dated bill of sale, which must identify the instrument model
number and serial number and call the number listed below:
Repair Department
ATP – Amprobe, TIF, Promax
Miramar, FL
Phone: 954-499-5400
800-327-5060
Fax : 954-499-5454
Website: www.amprobe.com
Please obtain an RMA number before returning product for repair. Outside the U.S.A.
the local representative will assist you. Above limited warranty covers repair and
replacement of instrument only and no other obligation is stated or implied.
P/N: ATP VPC-20Manual printed in China
2xAA
Disconnect probes from
Voltag. Do not over-tighten
screws
Miramara, Florida 33025
Tel: 954-499-5400 Toll Free: 800-327-5060 Fax: 954-499-5418