Amway eSpring Datasheet

Easy Installation Guide
Contents :
Easy Installation 5 Steps
Step 1 : Checking the components
Step 2 : Attaching the adapter & diverter
Step 3 : Connecting the tubing
Step 4 : Checking for leaks
Step 5 : Test & Exam the unit

Easy Installation 5 Steps
Important!
The faucet adapter that comes with eSpring Water Treatment System
packaging may not suit all types of faucets in the market. You’re advised
to confirm the suitability of the adapter before purchasing, or change
the existing faucet to a suitable one. Make sure that this product can
be correctly installed.
eSpring Water Treatment System and its components which are installed
without following the standard guidelines or which have been modified
may result in diminished water purifier performance and may
jeopardise safety of drinking water.
eSpring Water Treatment System is only suitable for use in families who
receive their water from a municipal water supply. Should you have any
queries on the product, kindly connect with
eSpring Installation & Maintenance Guide
[e-mail] (Malaysia)
or
[e-mail] (Singapore)

Page 1
The packaging of eSpring Water Treatment System
contains the following components:
eSpring Installation & Maintenance Guide
Step 1 : Checking the components

eSpring Installation & Maintenance Guide
Unscrew to remove
the aerator.
Unscrew to remove the
metal connector and
plastic ring from top
of the diverter.
Pick an appropriate
adapter and fix the
diverter until secure.
Step 2 : Attaching the adapter & diverter
Page 2
1.
2.
3.

eSpring Installation & Maintenance Guide
There are 3 standard adapters (provided)
*The adapters provided may not fit your faucet.
Choose an adapter which is
suitable for your faucet.
External thread taps
Please make sure the threaded adapter is snuggly
attached to the faucet to avoid leakage.
Attention
Metal Connector
55/64 diameter faucet
Attach the metal adapter onto
the faucet. Tighten it with a
coin to secure the diverter.
Threaded Connector
22mm diameter faucet
Remove the rubber washer from the
threaded adapter. Screw the adapter
to the tap, screw the metal adapter.
Then use a coin to screw onto the
tap and secure the diverter.
Page 3
1. External thread taps

eSpring Installation & Maintenance Guide
Please make sure the threaded adapter is snuggly
attached to the faucet to avoid leakage.
Attention
24mm diameter threaded adapter
Screw the threaded adapter to the metal connector, then
slide the plastic ring and use a coin to secure it onto the tap.
Page 4
There are 3 standard adapters (provided)
*The adapters provided may not fit your faucet.
Choose an adapter which is
suitable for your faucet.
2. Internal thread taps
Internal thread taps

eSpring Installation & Maintenance Guide
12-24mm diameter universal adapter
Unscrew and loosen the adaptor collar. Slide over the tap, tighten
the screws and collar. Screw the metal connector and use coin to
secure it,
If the outer diameter of your tap is too
large, remove the plastic sleeve. Make
sure the threaded adapter is securely
fixed to the tap to avoid leakage.
Page 5
Please make sure the threaded adapter is snuggly
attached to the faucet to avoid leakage.
Attention
There are 3 standard adapters (provided)
*The adapters provided may not fit your faucet.
Choose an adapter which is
suitable for your faucet.
3. No thread taps
No thread taps

Remove the top shroud.
Connecting the elbows and the
tubes. Make sure you attach the
tubes to the elbows first before
you attach the elbows to the
water treatment system.
Connecting to the water
treatment system.
Remove the electronic
module
Push tubing supports into their
respective tubes. Mark a line across
them at the 18mm length.
Position the unit on a flat,
dry surface. Make sure a
power outlet is reachable
within 1.5m.
Fully push the tubes into
the bracket until the mark
on the tubing disappears.
Push in until the mark on
the elbows disappears.
Attention
eSpring Installation & Maintenance Guide
Step 3 : Connecting the tubing
Page 6
Connect to the water treatment system

If the tubing is too long, use a knife to cut the tubes.
Make sure to make a straight cut to form a flat end on the tubes.
Attach the tubings
to the diverter.
Use a tie strap to
secure the tubings.
Attention
eSpring Installation & Maintenance Guide
Page 7
Step 3 : Connecting the tubing
Connect to the diverter

Before checking for leakage, make sure the collar of the cartridge is
tightened. If there is leakage, shut the tap immediately and reinstall.
eSpring Installation & Maintenance Guide
Attention
Step 4 : Checking for leaks
Page 8
Turn on the tap and switch
the diverter handle to treated
water position.
Check for any signs of leakage
at all tubing connections.
Check at the connection with the
diverter. After checking, flush for
5-15 minutes, to remove air pocket
and carbon dust. Lastly, switch the
diverter handle to the untreated
water position, then turn off the tap.

eSpring Installation & Maintenance Guide
Step 5 : Test & Exam the unit
Page 9
Install the electronic module.
Push cord strain relief and
tubings into the notch.
Replace the cover. Plug the
power adapter into the wall
outlet. The above display
shows that installation is
complete.