AMX RDA-ENC2 Assembly instructions

Installation Sheet
Dimmer Enclosures RDA-ENC2, RDA-ENC4, and RDA-ENC6
The AMX Lighting™ RDA-ENC2, RDA-ENC4, and RDA-ENC6 enclosures
provide secure mounting for all Radia controllers/modules. The enclosures
are CE, UL, and C-UL approved.
Installation Instructions:
• For indoor use only.
• Mount on vertical surface only.
• Maintain 12" (304.88 mm) minimum clearance above and below the
enclosure.
• Route class 1 conductors through upper conduit knockouts.
• Route class 2 conductors through lower conduit knockouts.
• Use 75°C (167°F) copper conductors only.
• Install filler plate #28-10500 (RDA-EFP) in all unused openings.
• Install only UL approved modules (see the UL Number Cross Refer-
ence to AMX Lighting ID table).
Enclosure Weights:
• RDA-ENC2: 4.5 lb. (2.04 kg)
• RDA-ENC4: 7.5 lb. (3.40 kg)
• RDA-ENC6: 9.5 lb. (4.31 kg)
Radia enclosures must be mounted on a vertical surface with a minimum of
12" (304.8 mm) clearance above and below the enclosure.
Dimensions between center lines (from FIG. 2):
RDA-ENC2:
• A to B = 5.25" (133.4 mm)
• B to C = 11.0" (279.4 mm)
RDA-ENC4:
• A to B = 10.0" (254.0 mm)
• B to C = 11.0" (279.4 mm)
RDA-ENC6:
• A to B = 16.0" (406.4 mm)
• B to C = 11.0" (279.4 mm)
FIG. 1 Top, front, bottom, and side views of the RDA enclosures
To p V i e w
Internal View
Bottom View
RDA-ENC2 RDA-ENC4 RDA-ENC6
Side View
(for all enclosures)
12.0"
(304.8 mm)
6.0"
(152.4 mm)
0.75"
(19.05 mm)
12.0"
(304.8 mm)
6.0"
(152.4 mm)
18.0"
(457.2 mm)
FIG. 2 Bracket configuration
A to B
B to C
Bottom slot
To p sl o t
Configuration for
right and left
mounting brackets
for all Radia
enclosures.
Maximum mounting
screw size: #12

AMX Corporation reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
043-019-2245 8/01 ©2001 AMX Corporation. All rights reserved.
The AMX logo is a trademark of AMX Corporation. AMX Corporation reserves the right to alter specifications without notice at any time.
3000 research drive, richardson, TX 75082 USA • 469.624.8000 • 800.222.0193 • fax [phone] • technical support 800.932.6993
The following section provides a cross reference between the UL ID mod-
ule numbers and AMX Lighting module IDs. The modules identified are
the only modules that can be used in the RDA-ENC2, RDA-ENC4, and
RDA-ENC6 enclosures.
UL Number Cross Reference to AMX Lighting ID
UL ID AMX ID UL ID AMX ID UL ID AMX ID
28-10100 RDC-DC/120 28-10150 RDD-DM6/240 28-10230 RDM-ZC,
RDM-2ZC,
RDM-PR,
RDM-2PR
28-10300 RDM-MR60 28-10110 RDC-DC/240 28-10160 RDD-DM6/277
28-10240 RDM-ZC50 28-10310 RDM-MDM 28-10120 RDC-DC/277
28-10170 RDA-PSM/120 28-10260 RDM-SWM,
RDM-2SWM,
RDM-3SWM
28-10340 RDA-CHK
28-10130 RDC-PDC/
120
28-10200 RDM-INC 28-10270 RDM-HSW,
RDM-2HSW,
RDM-3HSW
28-10350 RDM-HFDB 10-28410 RDM-FDB,
RDM-2FDB,
RDM-3FDB
28-10133 RDC-PDC/240
28-10210 RDM-2INC 28-10280 RDM-MR,
RDM-2MR,
RDM-3MR
28-10360 RDM-DPSM
28-10140 RDD-DM6/
120
28-10220 RDM-INC50 28-10290 RDM-MR35
28-10370 RDM-HDC 10-28400 RDM-DC,
RDM-2DC,
RDM-3DC