AMX NXA-ENET24 User manual

1.73 44
9.12 231.65
17.32 440
ECN
REV DESCRIPTION DATE APPR
AJL
02/03/05
INITIAL RELEASE
6689
REVISIONS
NOTICE: This drawing is the
property of AMX Corporation.
that is not generally known
shall be confidential except
to the extent the information
has been previously established.
This drawing may not be copied,
for manufacture or sale without
reproduced, or used as the basis
All information contained herein
written permission.
REV APPR
DO NOT SCALE THIS DRAWING.
UNLESS OTHERWISE SPECIFIED:
TOLERANCE ON DECIMAL DIMENSIONS: XX = .010
FRACTIONAL DIMENSIONS INCLUDING HOLES: +/- 1/64
SURFACE FLATNESS .003 TIR PER LINEAR INCH.
TOLERANCE ON HOLE DIAMETERS:
UNDER .250 ú
.250 TO .500
OVER .500
ANGLES: +/- 1.0°
ALL DIMENSIONS IN INCHES.
= +.008 -.005 PROD ENGR
THIRD ANGLE
PROJECTION
MATL SUP
QUALITY
ENGR SERV
ENGINEER
XXX = .005
= +.006 -.005
= +/- .005
DRAWN
REL APPR REL DATE
3000 RESEARCH DRIVE
RICHARDSON, TX 75082
D
SIZE DWG. NO.
AMX CORPORATION
REV.
SCALE: 1:1
95-2178-60 SHEET 1 OF 1
NXA-ENET24
PICTORIAL,
95-2178-60 A
DAS 02/03/05
R:\MECH\RELEASED\2178-60,-61_Lurtz\CURRENT\ 95-2178-60