Analog way RK-300 User manual

• TheRK-300automaticallydetectstherightversions
of the product to control. Connect the DB9 cable
suppliedoranEthernetcrossovercableusingthe
sameprotocolastheunitconnected.
• TocontrolthefollowingSeamlessSwitchers:
Control
Mode
Seamless
Mixer
Seamless
Matrix
Quadra-
vision
Soft Edge
Blending
EKS500 xx(1) x
EKS400 xx(1)
OPS300 x x
OPS200 x
PLS300 x
PLS200 x
SVU300 x
SVU200 x
SMX100 x
SMX200 x(1)
STE100 x
SQD200 x
Navigation Menu:
To access the RK-300 menu, press the [EXIT/MENU]
button in the control section.To highlight items in the
menu which will appear on the VFD screen, turn the
scrollknobleftorrighttothedesiredmenuitem.When
you have reached the desired menu item, press the
[ENTER] button in the control section to access that
menufunction.
Pressingthe[ENTER]buttonwhenaselectionhasbeen
made sets the value to that selection in the RK-300
memory.Whenallsettingshavebeenmade,pressthe
[EXIT/MENU]buttontoexitsub-menusandreturntothe
mainmenu.
IMPORTANT:simplyselectingamenuitemwillnotsetit
tothatvalue.Besuretopressthe[ENTER]buttonwhen
parameteringthemenuitems.
OnceyouhaveconnectedyourRK-300toyourswitcher,
conguretheconnectionsettingsonbothdevices.
Foraserialconnection,selectRS232fromtheRS232/
LANmenuonbothdevices.
ForaLANconnection,selectLANfromtheRS232/LAN
menuonbothdevices,andcongureeachdevicewith
auniqueIPintheLANsetup->RK-300addressmenu.
The default IP on the RK-300 is 192.168.0.15. Next,
entertheIPofthedeviceyouwishtocontrolintheLan
Setup->Deviceaddressmenu.
Onceyour settingsarecorrect,theRK-300 willbeginto
synchronizewiththedevice,andyouwillbereadytobegin.
QUICK START GUIDE
What’s in the box
RK-300 settings
Thank you for choosing Analog Way and the RK-300. By following these simple steps, you should be able to setup
and use your powerful remote Control Keypad within minutes. Discover the RK-300 extensive capabilities and intuitive
interface while conguring your rst show, and unleash your creativity for a new experience in show and event
management by Analog Way.
RK-300 - Ref. RK-300
1 x RK-300 (RK-300)
1 x Power supply Cord
1 x DB9 (M/F) Cable
1 x Carrying Case
1 x Quick Start Guide *
* Download on our website: http://www.analogway.com
(1) We recommend using the Advanced Seamless Matrix Mode with
an ORCHESTRA or a Remote Control Software (RCS). Button Color Usage:
#1 = Source is on the main outputs
Solid red: #2 = Freeze enable
#3 = Stand-by button
#4 = Preset Selection
Solid green: #1 = Source is on Preview
#2 = Function available for modication
Solid orange: Unlocked sources
Blinking red: Layer/source selected, and is currently
active on the main output
Blinking green: Layer/source selected, and is not currently
active one the main output

Front Panel Description
WORKING WITH THE RK-300
Toggle Standard or Mosaic mode
when available.
Switch between Status & Control Mode.
PREVIEW
EXIT/MENU
BACKGROUND/FRAME: Select the Frame Layer.
BACKGROUND LIVE/ PIP 1: Select the Live Layer/PIP1.
PIP 2: Select the PIP2 live Layer.
PIP 3: Select the PIP3 live Layer.
LOGO 1: Select the Logo 1 Layer.
LOGO 2: Select the Logo 2 Layer.
DSK: Shortcut to the Keying/Titling menu for the selected source.
#1 L/ F 1: Press to access source #1, Frame #1 or Logo #1.
#2 L/ F 2: Press to access source #2, Frame #2 or Logo #2.
#3 L/ F 3: Press to access source #3, Frame #3 or Logo #3.
#4 L/ F 4: Press to access source #4, Frame #4 or Logo #4.
#5 L/ F 5: Press to access source #5, Frame #5 or Logo #5.
#6 L/ F 6: Press to access source #6, Frame #6 or Logo #6.
#7 L/ F 7: Press to access source #7, Frame #7 or Logo #7.
#8 AL/ F 8: Press to access source #8, Frame #8 or Logo #8 or Animated Logo.
DVI 1 to DVI 2: Press to access DVI #1 or DVI #2.
SDI 1 to SDI 4: Press to access SDI #1,2,3 or 4.
BLACK: Change the active layer to Black to clear a layer or PIP.
FREEZE: Freeze the input linked to the current layer on MAIN.
OUTPUT #1: Press to select the Output #1, select a layer and a source then press [TAKE].
OUTPUT #2: Press to select the Output #2, select a layer and a source then press [TAKE].
SHIFT: Secondary function selection button.
INPUT
MATRIX
SHIFT
LAYER

* accessible via the Shift Key
Press on [TAKE] allows
to display the pre-
selected sources onto
the MAIN output with
the selected effects.
VOL: Volume adjustment of the MAIN output (adjust with the knob ◄ ►).
Button is blinking during the adjustment. This function will be dis-
missed after 2 seconds delay or after pushing [ENTER] button.
MUTE: Toggles the audio mute of the Main output. Button illuminates
when volume is muted.
Easy adjustments (size or position) with this mini joystick. Adjust
the selected PIP or Logo, X-Axis (Left/Right), Y-Axis (Up/Down)
and click to change the mode (position or size).
ENTER button validates a selected item.
Adjust Sources:
Chose the selected source Aspect Out as:
1:1: No scaling, layer size has no effect
CENTERING*: Centered (aspect ratio preserved, black bars around source)
FULL*: Fullscreen (aspect ratio distorted, black bars around source)
CROP*: Cropped (aspect ratio preserved, extra image cropped
----
ZOOM: Congures the Layer Zoom
----
SIZE: Resize the active layer with the mini joystick
POS: Adjust PIP Layer or Logo Position with the mini joystick
CUT: Select Cut as the current transition type.
FADE: Select Fade as the current transition type.
USER 1: Selects the customized transition congured in the Control menu.
USER 2: Select User #2 as a customized transition.
Preset section: Recalls stored presets from the device. Store presets
using Menu ->Preset->Store Preset.
P1/P5: Select P #1 as a customized preset or P #5 by SHIFT function.
P2/P6: Select P #2 as a customized preset or P #6 by SHIFT function.
P3/P7: Select P #3 as a customized preset or P #7 by SHIFT function.
P4/P8: Select P #4 as a customized preset or P #8 by SHIFT function.
Allow to copy the pre-
vious Current Preset in
the Next Preset at the
end of a [TAKE].
Mini T-Bar to control
effect level.
Available when controling a device which offers
Quadravision.
W1: Change the active layer into the Window #1.
W2: Change the active layer into the Window #2.
W3: Change the active layer into the Window #3.
Allow to scroll through the
different menus
VOLUME
CONTROL
T-BAR
TOGGLE PRESET
TAKE
QUADRAVISION
ENTER
ADJUSTMENT
POSITION
EFFECT/PRESET

Rear Panel Description
Menu Tree
Going further with the RK-300
The RK300 allows for remote control of all available device features. Please check your device manual for more information
on device operation and usage. Please check our website for further information: www.analogway.com
Version : 3.60 - 14/09/11 - M3.0
Code : 140116
RS-232 PORT: This 9-pin Female D connector provides RS-232 port serial communication with the
switcher and also to upgrade the RK-300. A DB9 F/F crossover cable (not supplied) is required for an
RS232 update. This port can also provide power to operate the RK-300 when connected to a switcher.
RJ-45 Connector: Connect the RK-300 to a 10/100 BT Ethernet LAN using this female RJ-45
connector: used to control the switcher and also to upgrade the RK-300. Please see the updater
software instructions for more information.
DC Power connector: Plug a Jack coaxial 5.5 - 2.1 - 9mm - external GND. 9/12 Vdc - 1A.
DC
RS-232
RJ-45
Versions
RS232/LAN
LAN setup
Key locking
Prog. keys
LCD brightness
Key brightness
Standby
Default values (L2)
LAN Update
RS232
Version: 1.00 BETA
I3=xxxx I4=xxxx
Boot: 1.00 BETA
O=0000
CS2=xxxx
I1=xxxx I2=xxxx
CS1=xxxx
CS3=xxxx
LAN
TCP
All
Fade
UDP
Menus
User 1
User 2
Type (L3)
RK-300 address...
Direction (L3)
Remote address...
Effect duration
Gateway address...
RK-300 port...
Remote port... (L1)
Netmask...
Default setup... (L2)
RK-300 CONTROL
(L1) UDP only
(L2) Conrmation asked
(L3) Only for User1& User2
Warranty
All Analog Way products have a 3 year warranty on parts and labor, back to factory, but do not include faults resulting from
user negligence, special modications, electrical surges, abuse (drop/crush), and/or other unusual damage.
Please note: The included carrying case and protective foam is not covered under warranty.
NOTE: The latest rmware upgrade is always available on our website: http://www.analogway.com
Allow to secure with a KensingtonTM Lock.