&Tradition Tripod HM8 Hvidt & Molgaard 1953 User manual

Congratulations with your new Tripod lamp, designed
in 1953 by Hvidt & Mølgaard. We hope you will enjoy
using this product and follow these instructions to
ensure correct installation. If you have any questions
or comments, please do not hesitate to contact us by
mail on:
[email protected]
Tripod HM8
Hvidt & Mølgaard
1953
Instructions

A
Tripod HM8
Hvidt & Mølgaard
1953
12/20
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of this
instruction manual first. &Tradition is not responsible for any
faults or damages caused by not following these instructions
correctly. Do not modify this product in any way.
Contents
ALamp
Tools needed
- Bulb type E27
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- Keep product well out of children’s reach.
- The lamp is only intended for interior use.
- Consult a professionally qualified electrician if in any doubt.
- Do not place the cable within reach of small children or
anywhere with a risk of falling over it.
- If the external cable or cord of this lamp is damaged,
it must be replaced by the manufacture or a similar
qualified person in order to avoid a hazard.
Cleaning instructions
- Wipe surface of the shade with a soft, damp sponge or
cloth, and wipe immediately with a dry cloth.
- Do not use any abrasive cleaning tools such as steel wool,
scouring sponges or stiff brushes.
Step 1
The lamp is delivered fully assembled. Insert an E27 bulb
into the socket.
Step 2
Insert the plug into a wall socket and use the switch on
the cord to turn the lamp on and o.
For indoor use only
E27 maximum 60W
Bulb not included

andtradition.com