Anker SOLIX Solarbank E1600 User manual

Product Number: A17C0 5100500xxxx V01
@AnkerDeutschland
@AnkerJapan
@Anker
@AnkerOcial
@Anker_JP
@anker_ocial
@anker_jp
For tutorial videos, FAQs, manuals, and more
information, please visit:
Or scan the QR code below:
https://support.anker.com
USER MANUAL
Anker SOLIX Solarbank E1600

EN 0201 EN
What's in the Box
MC4 Y Output Cable ×2
Anker SOLIX Solarbank E1600
Solar Panel Extension Cable ×4
Overview
Product Overview
1
2
3
4
5 6 7
Power button Power status LED
IoT button IoT status LED
MC4 ports for PV input 1 MC4 ports for PV input 2
MC4 ports for PV output
Button Controls
Button Action Function
Press for 2 seconds Turn Solarbank on
Press for 2 seconds Turn Solarbank o
Press once when powered on Check current battery level
Press once Enable Internet connection
Press for 2 seconds Disable Internet connection
Press for 7 seconds Reset Bluetooth and Wi-Fi
Simultaneously press for at least
15 seconds Reset Solarbank
LED Guide
LED Indication Status
Breathing white Being charged
Steady white Current battery level
Flashing green Disconnected to the Internet
Steady green Connected to the Internet
Light o Connection disabled
Flashing red Malfunction warning
User Manual

EN 0403 EN
Getting Started
Install Your Solarbank
Option A: Position your Solarbank on a hard, level floor.
Option B: Mount your Solarbank onto a solid concrete wall using additional mount brackets*.
＜1m / 3.28ft
*Please scan the QR code to buy mount brackets.
Connect Cables
Single Solarbank
1. Connect Solarbank to the micro inverter using the included MC4 Y output cables.
2. Connect the micro inverter to a home outlet using the original cable.
3. Connect the solar panels to Solarbank using the included solar panel extension cables.
1
2
3
*The plug varies by region.

EN 0605 EN
Cascaded Solarbanks
Only two Solarbanks can be cascaded to double the capacity to 3,200 Wh.
1. Connect each Solarbank to the micro inverter using the included MC4 Y output cables.
2. Connect the micro inverter to a home outlet using the original cable.
3. Connect solar panels to Solarbanks using the included solar panel extension cables.
1
2
*The plug varies by region.
3
Before connecting cables, ensure that the micro inverter, solar panels, and the home grid are
disconnected, and Solabank is turned o.

EN 0807 EN
Using Your Solarbank
Power On
Press the power button for 2 seconds to turn on your Solarbank.
When powered on, the power status LED will flash white and IoT status LED will flash green simultaneously
three times.
2S
Anker App for Smart Control
Download the Anker app to get full functionality of your Solarbank.
1. Download the Anker app from the App Store (iOS devices) or Google Play (Android devices), or by scanning
the QR code. After installing the app, sign up for an account.
2. Follow the on-screen instructions to complete the setup.
• Connect to the Internet: To remotely interact with your home system, connect your Solarbank to the Internet
via Wi-Fi 2.4G or Bluetooth 4.0 network.
• Establish a home system: Create a home system or join an existing one, and you can monitor energy flow
and make an energy plan for your home.
• Transfer energy: Customize your energy usage and storage preferences by period.
• Check energy data: Get insight into your system's energy generation, usage, and storage with energy
graphs.
Storage and Maintenance
For optimal performance, follow the instructions below to store and maintain your Solarbank regularly.
• Keep the product on a flat surface when using, charging, and storing.
• Use a cotton cloth and water to clean. Do not use steel wool or other hard materials for cleaning.
• For long-term storage, charge and discharge Solarbank once every 3 months (discharge Solarbank to 20%,
then recharge it to 80%).
FAQ
Q1: Can Solarbank be charged and discharged at the same time?
No, Solarbank uses the same port for input and output connections.
Q2: Can Solarbank be charged with solar panels from a dierent brand?
Yes. Please use solar panels that meet the following specifications for charging.
Input current: 25A max Voltage range: 11-60VDC Rated output power (discharging): 880W max
Q3: How can I prolong the lifespan or better maintain my Solarbank that is mounted on the floor?
If your balcony is often flooded, we recommend raising your Solarbank. This will prevent malfunctions due
to prolonged soaking.
Specifications
Specifications are subject to change without notice.
Capacity 1600Wh
Battery type LiFePO4
Wireless type Bluetooth, 2.4GHz Wi-Fi
Input port MC4
Input power (charging) 800W max
Input current 20A max
Voltage range 11-60VDC
Output port MC4
Rated output power (discharging) 800W max
Output current 20A max
Nominal voltage range 11-60VDC
Charging temperature 0-55℃
Discharging temperature -20-55℃
Dimensions 420×232×240mm
Weight 20kg
Waterproof rating IP65

EN 1009 EN
Warranty 10 years
Safety Information
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before you use this product. Do not make any changes or create settings that are not
described in this manual. If physical injury, loss of data, or damage is caused by failure to follow instructions,
the warranty does not apply.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put fingers or hands into the product.
• Use of an attachment not recommended or sold by the product manufacturer may result in a risk of
fire, electric shock, or injury to persons.
• To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when
disconnecting the product.
• Do not use the product in excess of its output rating. Overload outputs above the rating may result
in a risk of fire or injury to persons.
• Do not use the product or attachment that is damaged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Do not operate the product with a damaged cord or plug, or a damaged output cable.
• Do not disassemble the product. Take it to a qualified service person when service or repair is
required. Incorrect reassembly may result in a risk of fire or electric shock.
• Do not expose the product to fire or high temperatures. Exposure to fire or temperatures above
130°C may cause an explosion.
• To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any
instructed servicing.
• Have servicing performed by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the product is maintained.
• When charging a device, the product may feel warm. This is a normal operating condition and
should not be a cause for concern.
• When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in
any way.
• Do not clean the product with harmful chemicals or detergents.
• Misuse, dropping, or excessive force may cause product damage.
• When disposing of secondary cells or batteries, keep cells or batteries of dierent electrochemical
systems separate from each other.
• Do not use or store this product in direct sunlight for a long period, such as in a car, cargo bed, or
any other place where it will be exposed to high temperatures. Doing so may cause the product to
malfunction, deteriorate, or generate heat.
• Servicing of batteries should be performed or supervised by personnel knowledgeable about
batteries and the required precautions.
• Do not use this product near strong static electricity or strong magnetic fields.
• Do not expose this product to flammable, explosive gas, or smoke.
• Do not stand on the product.
• Do not immerse the product in water. If the product accidentally falls into water, place it in a safe,
open place and keep it away from fire until it is completely dry.
General Instructions Regarding Removal and Installation of Batteries
• When replacing batteries, replace with the same type and number of batteries or battery packs.
• Do not dispose of batteries in a fire. The batteries may explode.
• Do not open or damage batteries. Released electrolytes may be toxic and are harmful to skin and eyes.
• A battery can present a risk of electrical shock and high short-circuit current. The following precautions
should be observed when working on batteries:
a) Remove watches, rings, or other metal objects.
b) Use tools with insulated handles.
c) Wear rubber gloves and boots.
d) Do not lay tools or metal parts on top of batteries.
e) Disconnect the charging source prior to connecting or disconnecting battery terminals.
f) Determine if the battery is inadvertently grounded. If inadvertently grounded, remove the source from the
ground. Contact with any part of a grounded battery can result in electrical shock. The likelihood of such shock
can be reduced if such grounds are removed during installation and maintenance (applicable to equipment
and remote battery supplies not having a grounded supply circuit).
Warning:
• Replacing a battery with an incorrect type may nullify safeguards and create danger;
• Disposal of the battery/product in a fire, a hot oven, or another source of significant heat, or by mechanically
crushing or cutting the battery/product may result in an explosion;
• Leaving the battery/product in an extremely hot environment may result in an explosion or leakage of
flammable liquids or gases;
• Subjecting the battery/product to extremely low air pressure may result in an explosion or leakage of
flammable liquids or gases.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
ATTENTION RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UN TYPE INCORRECT.
ÉLIMINER LES BATTERIES USÉES SELON LES INSTRUCTIONS.
Attention
Not permitted on aircraft.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/53/EU &
2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com.
The following importer is the responsible party (contract for EU matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany
This symbol means the product must not be discarded as household waste, and should be delivered
to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural
resources, human health, and the environment. For more information on the disposal and recycling
of this product, contact your local municipality, disposal service, or the shop where you bought this
product.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
and any use of such marks by Anker Innovations Limited is under license. Other trademarks and
trade names are those of their respective owners.

EN 1211 EN
[e-mail]
[e-mail] (For Middle East and Africa Only)
Customer Service
DE: Kundenservice FR: Service Client
IT: Servizio Clienti
ES: Atención al Cliente
NL: Klantenservice
(US/CA) [phone]
(UK) [phone]
(DE) [phone]
[phone] (Anker SOLIX)
(Middle East & Africa) [phone]
(UAE) [phone]
(KSA) [phone]
(Kuwait) [phone]
(Egypt) [phone]
(AU) [phone]
(TR) [phone]
(RU) [phone]
(India) [phone]
(中国) [phone]
(日本) [phone]
(한국) [phone]