annke X4 User manual

www.annke.com
Fast installation manual driving recorder
www.annke.com
Fast installation manual driving recorder

1
◆Preface
Thank you for purchasing car dash board camera. Please read this
manual carefully before using, and keep it for future use.
◆Warning
1, Please use the 4GB, class 6 micro SD card or above version.
2, Please format the card if the card is the first using in the certain
car dash board camera.
3, The camera will shoot the best video when the light is enough,
especially in Sunny Day.
4, It is better to use the following player for the video, Windows
Media Player、Quick Time Player.
5, If the camera does not work, please be sure the surrounding
temperature is normal, even the products have past the high
temperature and lower temperature testing. But the reasonable
temperature is better for long using.
◆The basic function

2
1. Low illumination high-definition video （1080P@30fps、
720P/30FPS）
2.170 degree wide angle lens
3. 2.31 inch LTPS
4. G-sensor
5. GPS logger(optional)
6. Recording when cars start on
7. Loop recording
8. AV output
9. Support micro SD card up to 32GB
10. Charging when recording
11.Play back on computer
12. WDR (Wide Dynamic Range)

3
1.Screen 2. Menu 3. UP 4. Down 5.OK
12.lens 13. Speaker
◆side view
◆Front view

4
6.power 7.TF 8.USB 9.AV-OUT 10.Reset
◆Said view
11.GPS
◆Operation
On/Off
A, Automatically
When the car is starting, the camera is on. When the car is off,
the camera is off.
B, Handle
On
Press button, Power for 2s.

5
When there is no card
Off
Press the Button, Power for 2s.

6
Notice：When the voltage is too low, the camera will be off after
saving the files.
Shooting Video
Handle
1, Press the button, Power for 2s

7
2, Press the button,OK
Automatically
1, Start the car
2, The camera will shoot video after 2s

8
Notice: When it is shooting video, the sign, on up-left
flashes.
Pause
Press the button, OK
Digital Zoom
Press the button Up to zoom+, press the button Down to Zoom-
On/Off Audio

9
During shooting, press the button Down to Zoom- bottom, press the
button, Down again to on/off the Audio
On/Off LED lamp
During shooting, press the button, Power toturn on/off LED
◆Video reset, press model button for 2S on video states .
Image resolution：1080P/720P/WVGA/VGA
Loop video: OFF /2 min/3 min /5 min
WDR：ON/OFF
Motion detecting: ON/OFF
Power supply automatic video: ON/OFF
Delay shutdown：OFF /10S/20S /30S
Boottime delay：OFF /10S/20S /30S
Recording audio: ON/OFF
Date stamp: ON/OFF

10
G-sensor set: OFF/High/medium/low
◆system setup
Date/time: 2012/01/01 00:11 Year/month/day
Plate number：AAAAAA
Auto power off: OFF / 3 min/5 min /10 min
Beep sound: ON/OFF
Language: English/ 繁 体 中 文 /简 体 中 文 /langue française/
português/한국의/ italiano /русский/ Deutsch/日本語
TV mode: PAL/NTSC
Frequency：50HZ/60HZ
Screensavers: Close / 1min/3 min / 5 min
Lamp setting: ON/OFF
Exposure ：+2/3;+1/3;+0.0;-1/3;-2/3
White balance: Auto;Daylight;Cloudy;Tungsten;Fluorescent
Formatting: Yes/No

11
The default Settings: Yes/No
Version: * * * * * *
◆Shoot Image
1, Press the button, Mode, switch to video standby
2, Press the button, Okto shoot image
Digital Zoom
Press the button Up to zoom+, press the button Down to
Zoom-
On/Off LED lamp

12
During shooting, press the button, Power to turn on/off LED
◆Image setup
Image Reset: 12M/5M/3M
Capture Mode: Single/2S/5S/10S
Sequence:Off/On
Quality:Fine/Normal/Economy
Sharpness:Strong/Normal/Soft
Color:Normal/Black& White/Sepia
Quick Review:Off/2S/5S
Date Stamp:Off/Date/Date/Time
◆Replay
1, Press the button, Mode, switch to replay standby

13
2, Press the button, Up or Down to choose the file or images
3, Press the button, Ok two times to replay
Delete
1, Press the button, Mode, switch to replay standby

14
2, Press the button, Up or Down to choose the file or images
3, Press the button, Ok
4, Press the button, Menu
5, Press the button, Down
6, Press the button, Ok

15
Lock and Unlock
Lock Current
1, Press the button, Up or Down to choose the lock file
2, Press the button, Okonetime

16
3, Press the button Menu
4, Press the button, Up or Down to choose Unlock Current
5, Press the button, OK
If you want to lock all or unlock all, please choose in this menu
too.
Slide Show
1, Press the button, Up or Down to choose any file
2, Press the button, Okonetime

17
3, Press the button Menu
4, Press the button, Down to choose Slide Show
5, Press the button, Okfor reset the times

18
◆HDMI
1,Connect the Camera and TV with HDMI Cable
2, Turn on camera
3, Press the button, Menu on camera

19
4, Other operations are same that as you do on camera
◆Connect with PC
Turn on camera, you will get the following
Press the button, Up or Down to choose
Press the button, Okto confirm, you will get following.