Antari HZ-1000 User manual

1
HZ-1000
Hazer Machine User Manual
English
©2018 Antari Lighting and Effects Ltd.

3
User Manual
Safety Information
Please read the following safety information carefully before operating the
machine. Information includes important safety information about installation,
usage, and maintenance. Pay attention to all warning labels and instructions in
this manual and printed on the machine.
If you have questions about how to operate the machine safely, please contact your local
Antari dealer for help.
․Keep this device dry.
․Always connect to a grounded circuit to avoid risk of electrocution.
․Before connecting the machine to power, always check the voltage indicated on the
machine matches your local AC voltage. Do not use the machine if AC power voltage
does not match.
․Disconnect the machine from AC power before servicing and when not in use.
․This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled,
disconnect AC power and clean with a damp cloth. If fluid is spilled onto electronic parts,
immediately unplug the machine and contact your local Antari dealer for advice.
․No user serviceable and modifiable parts inside. Never try to repair this product, an
unauthorized technician may lead the machine to damage or malfunction.
․For adult use only. Never leave the machine running unattended.
․Install in a well ventilated area. Provide at least 50 cm space around the machine.
․Never add flammable liquid of any kind to the machine.
․Make sure there are no flammable materials close to the machine while operating.
․Only use Antari fluid. Other fluid may lead to malfunction.
․If the machine fails to work, unplug the machine and stop operation immediately.
Contact your local Antari dealer for advice.

4
․Before transporting the machine, make sure the fluid tank is completely drained.
․Smoke fluid may present health risks if swallowed. Do not drink haze fluid. Store it
securely. In case of eye contact or if fluid is swallowed immediately look for medical
advice.
Unpacking and Inspection
Immediately upon receiving the machine, carefully unpack the carton, check all content to
ensure that all parts are present and have been received in good condition. If any parts
appear damaged or mishandled from shipping, notify the shipper immediately and retain the
packing material for inspection.
What is included: 1 x HZ-1000 Hazer
1 x Power Cord
1 x User Manual
Product Dimension
690 mm
510 mm
610 mm

5
Product Overview
Setting Up
Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm
of open space around the machine.
Step 2: Fill the fluid tank with Antari approved fluid.
WDMX Wireless Solution
(Optional)
TFT Color Touch Panel
Breaker
Main Power Switch
XLR 3-Pin & 5-Pin
in/out DMX
Connectors
Neutrik Powercon True1
Sensor
Fluid Tank
Adjustable Air Diverter
Fluid Level Indicator
Fog Output Nozzle

6
Step 3: Connect the machine to a suitably rated power supply. To determine the power
requirement for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly
grounded to avoid risk of electrocution.
Step 4:
To start making haze, press “VOLUME” on screen then select output level “LOW” or “HIGH”.
To stop making haze press “OFF”
Step 5: To turn off the machine, put the power switch to the OFF position.
Operation
Control Panel Operation
The machine can adjust settings and be controlled through the touch screen panel.
Main Menu
Level 1
Level 2
TIMER
LOW/HIGH/OFF
VOLUME
LOW/HIGH/OFF
DMX 512
001-511

7
SETTING
00 min 01 secs
59 mins 59 secs
00 min 01 secs
59 mins 59 secs
LOW/HIGH
LOW/HIGH
20-100%
001-511
Power On/Off
Reset On/Off
On/Off
On/Off
DMX Connector Pin Assignment
The machine provides 3 or 5 pin XLR connectors for DMX connection. The diagram below
indicates pin assignment information.

8
Pin
Function
1
Ground
2
Data-
3
Data+
4
Not used
5
Not used
DMX Operation
Making the DMX Connection –Connect machine to a DMX controller or to one of the
machines in the DMX chain. The machine uses 3-pin and 5-pin XLR connectors for DMX
connection, the connector is located on the rear of the machine.
DMX Channel Function
Channel 1
DMX Value Range
Function
Haze Output Level
0 –5
Haze Off
6 –127
Haze Output Low
128-255
Haze Output High
Channel 2
DMX Value Range
Function
Fan Output Level
0 –5
Fan 20%
6 –255
Fan 21 –100%
Fluid
Only use Antari HZL oil-based liquid for the HZ-1000 Hazer. The machine is tested and
calibrated with this liquid to get the best output performance. Warranty will be voided if any
other type of liquid is used, improper use of liquid may lead to machine failure and
malfunction.

9
Service and Maintenance
․Do not allow the machine to become contaminated.
․Remove dust from air vents with air compressor, vacuum or a soft brush.
․Only use a damp cloth to clean the casing.
․It is recommended to run the machine on a monthly basis in order to achieve best
performance and output condition.
․Excessive dust, liquid and dirt built up will degrade performance and cause overheating.
Breaker Reset
Disconnect AC power before replacing fuse. Only replace fuse with same type
and rating.
Step 1: Disconnect power cord from supply.
Step 2: Flip breaker to ON position.
Step 3: Turn machine back on to test
Breaker
120V = 12A 250V
240V = 7A 250V
Status Messages
Message
Status
Sensor Error
Flight case cover is closed and not able to generate haze
Temp 1 Error
Compressor 1 is overheating

10
Temp 2 Error
Compressor 2 is overheating
Temp 3 Error
Machine internal temperature is overheating
Technical Specifications
Input voltage AC 100-120V, 50 / 60Hz 9.6A
AC 220-240V, 50 / 60Hz 4.8A
Rated power 1150W
Fluid consumption 2.2 ml/min
Fluid tank capacity 6.4 l (1.69 gal)
Compatible fluid Antari HZL Haze Fluid
Operating time 40 hrs max. output
Ambient temp. range 0 °C - 40 °C (32 °F-104 °F)
Output 7500 cu.ft./min. (212 m³/min.)
Control DMX 512, Timer, Manual,
Wireless DMX (Optional)
DMX channels 2 channels
Connection Neutrik Powercon True1 (Power)
XLR 3-pin and 5-pin (DMX)
Optional accessories W-DMX-PCBR Wireless DMX 512
Dimension L 690 x W 510 x H 610 mm
(L 27.16 x W 20.07 x H 24.01 inch)
Weight 74.6 kg (164.46 lbs)

12
C08HZ1001