Antari S-600 Yeti User manual

S-600 Yeti
Snow Machine
User Manual
- English
-中文
© 2023 Antari Lighting and Effects Ltd.

1. Introduction ................................................................................................................................................. 1
2. Safety Information....................................................................................................................................... 1
3. Package Contents & Inspection................................................................................................................... 2
4. Machine Details........................................................................................................................................... 3
5. Technical Label Information........................................................................................................................ 3
6. Snow Fluid................................................................................................................................................... 3
7. Setting and Manual Operation..................................................................................................................... 4
8. Control Settings ........................................................................................................................................... 4
9. Machine Status Description......................................................................................................................... 6
10. DMX Connection ........................................................................................................................................ 6
11. RDM Function............................................................................................................................................. 7
12. WTR-20 Wireless Remote (Standard)......................................................................................................... 7
13. TIMO-WTR-90 W-DMX Add-on Module (Optional) ................................................................................ 8
14. SC-4 Cable Remote (Optional).................................................................................................................... 9
15. S-600-BH 5 Liter Bottle Holder without Bottle (Optional)......................................................................... 9
16. S-600-TKC 20L Tank Cap Assembly w/5M Fluid Tube (Optional)............................................................ 9
17. Service and Maintenance........................................................................................................................... 10
18. Technical Specifications .............................................................................................................................11
19. Warranty Disclaimer...................................................................................................................................11
20. Machine Dimension....................................................................................................................................11
1. 前言........................................................................................................................................................... 12
2. 安全注意事項........................................................................................................................................... 12
3. 包裝內容與檢查....................................................................................................................................... 13
4. 機器訊息................................................................................................................................................... 14
5. 技術標籤資訊........................................................................................................................................... 14
6. 雪花水....................................................................................................................................................... 14
7. 設定與手動操作說明............................................................................................................................... 15
8. 控制設定................................................................................................................................................... 15
9. 機器狀態說明........................................................................................................................................... 17
10. DMX 說明................................................................................................................................................. 17
11. RDM 功能................................................................................................................................................. 18
12. WTR-20 無線控制器(標配)..................................................................................................................... 19
13. TIMO-WTR-90 無線 DMX 擴充模組(選配)........................................................................................... 19
14. SC-4 有線控制器(選配)........................................................................................................................... 20
15. S-600-BH 5 公升油桶座不含油桶(選配)................................................................................................ 20
16. S-600-TKC 20 公升油桶蓋組含 5米油管(選配).................................................................................... 21
17. 維護和保養............................................................................................................................................... 21
18. 技術規格................................................................................................................................................... 22
19. 保固聲明................................................................................................................................................... 22
20. 機器尺寸圖............................................................................................................................................... 22
Appendix I – Grounding Instruction.................................................................................................................. 23

1
User Manual
1. Introduction
Please read all the user manual before operating the machine, and place the manual where the user can refer to it at
all time. The manual includes how to install and operate the machine under safe condition and explain all the labels
printed on the machine. If you encounter any problem, contact your local Antari dealer for assistant immediately.
2. Safety Information
DANGER
If the danger is not avoided, it will cause death or serious injury
WARNING
If the warning is not heeded, it can cause death or serious injury.
CAUTION
If the precaution is not taken, it may cause minor or moderate injury.
Must connect the machine to the correct rated voltage or it might lead to an electrical shock or a burn and may
cause serious consequences.
Must connect the machine to a protected circuit and ensure it is properly grounded to avoid the risk of
electrocution. For grounding instruction, please refer to Appendix I on page 23.
Do not operate the machine with a bundled power cord, it could lead to a fire hazard.
When operating the machine, do not point at people, animals, or fire.
WARNING
Please operate the machine on a flat, level hard and well ventilated surface area, reserve at least 50cm space
around the machine and make sure there is no flammable gas or material nearby.
Do not disassemble, repair or modify the machine, it may cause damages, malfunction, risk of electrical shock
or result in fire.
The machine can only be operated by adults or professionals, is not intended for use by person with reduced
physical sensory, mental capabilities, or lack of experience and knowledge including children.
Do not leave the machine running unattended, make sure all powers are off when leaving.
Children should be supervised to ensure that they do not play with the machine.
Do not use the machine upside down or tilt it, it might cause damages or malfunction.
Please store the fluid inside in a well ventilated area without direct sunlight and keep out of reach of children.
In case of eye contact or accidentally swallow the fluid, please seek medical attention immediately.
CAUTION
Keep the machine dry at all time. The machine is not waterproof, do not expose the machine to water, rain, or
moisture environment.
Please make sure the power outlet is not damaged or loose before plug in the power cord.
If the power cord is damaged, it must be replaced by Antari or its local dealers, otherwise the warranty will be
void.
Before operating the machine, please sure the fluid is filled in the fluid tank to avoid the pump in idling state
which could lead to overheat or malfunction.
Before transporting the machine, please make sure the fluid is drained and tank is empty. (Recommend using
DANGER

2
original package)
The machine is for indoor use only.
Do not operate the machine in any area with unstable voltage.
If you experience strange sound or malfunction, turn off the power and unplug the power cord immediately
and contact your local Antari dealer for assistant.
Do not contact any moving part.
Only use accessories recommended or sold by Antari.
Please make sure the power is off when not using the machine and unplug the power cord if not intend to use
for a long period of time.
To disconnect, turn all controls to the off position, then remove plug from outlet.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Unplug from outlet before servicing or cleaning.
Do not operate the machine with a damaged cord or plug, or after the machine malfunctions or is dropped or
damaged in any manner. Return machine to the nearest authorized service facility for examination, repair, or
electrical or mechanical adjustment.
To ensure the lifespan of the machine, please only use the fluid manufactured by Antari, do not use other fluid
or additive, otherwise it may cause malfunction.
Before operating the machine, please read all warning labels on the machine, description as below:
Rear Cover Printing
WARNING!
DISCONNECT POWER BEFORE CHANGING FUSE.
USE ONLY WITH ADULT SUPERVISION.
DO NOT OPERATE WITHOUT LIQUID.
FOR INDOOR USE ONLY. KEEP DRY.
NO USER SERVICEABLE PARTS INSIDE.
3. Package Contents & Inspection
Immediately upon receiving the machine, carefully unpack the carton, check the content to ensure it is the correct
model and all parts are included. If any part appears to be damaged or missing during transportation, please contact
your local dealer and return in original package for inspection.
3.1 Package Contents
1 x S-600 Yeti Snow Machine
1 x WTR-20 Wireless Remote
1 x Neutrik powerCON Power Cable
1 x 5M Fluid Tube with Filter
1 x Hanging Bracket
1 x User Manual or Scan QR Code on the Machine
3.2 Optional Accessories
Item Code
Description
SC-4
Cable Remote
TIMO-WTR-90
W-DMX Add-on Module
S-600-BH
5-Liter Bottle Holder w/o Bottle
S-600-TKC
20 Liters Tank Cap Assembly w/5M Fluid Tube

3
4. Machine Details
01. Nozzle
06. Digital Control Interface
02. Fluid Tube Connector
07. XLR 4-Pin Connector (Remote)
03. 2 in 1 Power Switch
08. W-2 Wireless Receiver
04. Neutrik powerCON Connector (Power)
09. T-Shape Handle
05. XLR 5-Ping Connector (DMX)
10. Handle
5. Technical Label Information
Please read the technical label information on the back of the machine before operating it.
1. Model Name
5. Breaker/Fuse
2. Input Voltage
6. QR CODE for User Manual
3. Frequency
7. Serial No.
4. Rated Power
6. Snow Fluid
CAUTION
Always turn off the power before filling the fluid tank. Do not add flammable
liquid to the fluid tank. If fluid gets inside the machine, please contact your local
Antari dealer for assistant.
Only the snow fluid manufactured by Antari can be used, do not mix or dilute the snow fluid.
The machine is tested and calibrated with the specific snow fluid to get the best performance.
Please empty the fluid in the tank before switching to another fluid to avoid mixing.
The warranty on your snow machine will be void if you use snow fluid not manufactured by Antari.

4
7. Setting and Manual Operation
WARNING
Machine falling off might cause serious injury, please make sure it is secure
and firm on the overhead.
Step 1. Place the machine on a flat, level hard and well ventilated surface area and reserve at least 50cm open
space around the machine, and make sure there is no flammable gas or material nearby;
Step 2. Fill the fluid tank with Antari approved snow fluid;
Step 3. Connect the 5M fluid tube to machine and put the filter into the fluid tank; (Please see graph below)
Step 4. Plug the machine to the power outlet. Please read the technical label on the back of the machine and make
sure the power outlet has the correct rated voltage for the machine;
Step 5. Turn on the power, press [TIMER] button to start snowing and press [STOP] to stop snowing;
Step 6. Or turn on the power, press [VOLUME] button to start snowing and press [STOP] to stop snowing;
Step 7. To turn off the power, please make sure the machine is not operating. If you will not use the machine a
long period of time, please unplug the power cord.
***The motor of S-600 continues running for about 5 seconds after pressing [STOP] button, please turn off the
power after the motor stop running.
Connecting Fluid Tube Instruction:
8. Control Settings
S-600 Yeti Snow Machine can be operated in the following modes. The machine can only accept 1 type of signal at
a time.
Manual
Timer
DMX512
W-DMX
Wireless
Cable Remote
8.1 Control Panel Description

5
S-600 Yeti Snow Machine can be operated with the onboard digital control interface.
Button
Operating Method
Function
Press
To enter and scroll through setting menu
Press
Increase value/Up (In the Menu)
Press
Decrease value/Down (In the Menu)
Press
Press to active timer function (Ready Status)
Press
Press to active volume function (Ready Status)
Press
Stop/Confirm/Return
8.2 Menu Options Description
Menu
Description
Interval xxx min.
Set Interval Time from 1 - 240 minutes
Duration xxx Sec
Set Duration Time from 5 - 999 seconds
Volume Out xxx%
Set Output Volume from 0 - 100%
Blower xxx%
Set blower output from 0 to 100% to adjust snowflake size. The smaller
output, the bigger snowflake.
Fan Speed xxx%
Set fan speed from 0 to 100%
DMX512 Add: xxx
DMX-512 Address: 001-510
Wireless On/Off
Turn ON/OFF Wireless Function
Run Last Set On/Off
Turn ON/OFF Memory Mode (Turn ON, the machine will remember
last setting)
Link Mode Wired/Wireless
Link Mode：Wired / Wireless
W-DMX Unlink?
Wireless DMX Linking：Linking cancelled
W-DMX
---
Wireless DMX status
W-DMX ok
W-DMX Transmitter assigned, DMX signal
received.
No DMX
W-DMX transmitter assigned, No DMX signal
TX Lost
W-DMX link lost or linking to transmitter
Unassign
W-DMX Transmitter not assigned
UID 1ED8 06020001
Product UID Code
Run Time 0000000H
Accumulated Snowing time：0 - 9999999 hour
W. Remote Pair/Upair
Wireless Transmitter：Pair / Unpaired
KeySound Set On/Off
Keypad Sound：On / Off
Backlite AlwaysOn/AutoOff
Screen Backlite: Always On /Auto Off
Default Proceed?
Reset to factory settings

6
9. Machine Status Description
Screen
Description
S-600 v1.0
Software Version
AC Input AC-XXX
Input Voltage
Ready To Snow
Machine is ready to make snow.
Remote Out xxx%
SC-4 wired remote operating (only shows when SC-4 is connected)
Volume Out xxx%
Running at volume mode
Interval xxx min
Running at timer mode, Interval time
Duration xxx sec
Running at timer mode, Duration time
DMX-512 Add: xxx
Current DMX 512 channel
Priming 100%
Activate pump at maximum output
Wrong Voltage!
Wrong input voltage
AC Power Failure
AC Power Failure
10. DMX Connection
10.1 DMX Connector Pin Assignment
The machine has a 5-Pin for DMX connection. The diagram below indicates pin assignment information.
Pin
Function
1
Ground
2
Data-
3
Data+
4
N/A
5
N/A
The cap on the DMX IN port is a protection cover.
Please remove it with your finger before operation.
10.2 DMX Setting
Channel 1
DMX Value Range
Function
Snow Output Volume
0 – 5
Snow off
6 – 255
Snow Output 0 – 100%
Channel 2
DMX Value Range
Function
Blower Output
0 – 5
Blower off
6 – 255
Blower Output 0 – 100%
Channel 3
DMX Value Range
Function
Fan Output
0 – 5
Fan off
6 – 255
Fan Output 0 – 100%

7
11. RDM Function
The S-600 Yeti Snow Machine is RDM enabled, allowing control system to configure, monitor and manage. See
below table for supported RDM parameters.
GET Allowed
SET Allowed
Category
RDM Parameter ID’s (Slot 21-22)
Value
Required
Network
Management
DISC_UNIQUE_BRANCH
0x0001
O
DISC_MUTE
0x0002
O
DISC_UN_MUTE
0x0003
O
O
RDM Information
QUEUED_MESSAGE
0x0020
O
SUPPORTED_PARAMETERS
0x0050
O
O
PARAMETER_DESCRIPTION
0x0051
O
O
Product Information
DEVICE_INFO
0x0060
O
O
PRODUCT_DETAIL_ID_LIST
0x0070
O
DEVICE_MODEL_DESCRIPTION
0x0080
O
MANUFACTURER_LABEL
0x0081
O
O
DEVICE_LABEL
0x0082
O
SOFTWARE_VERSION_LABEL
0x00C0
O
O
O
DMX512 Setup
DMX_PERSONALITY
0x00E0
O
DMX_PERSONALITY_DESCRIPTION
0x00E1
O
O
DMX_START_ADDRESS
0x00F0
O
O
SLOT_INFO
(0x0120)
O
SLOT_DESCRIPTION
(0x0121)
O
DEFAULT_SLOT_VALUE
(0x0122)
O
Sensors
SENSOR_DEFINITION
0x0200
O
O
SENSOR_VALUE
0x0201
O
DEVICE_HOURS
0x0400
O
O
O
Control
IDENTIFY_DEVICE
0x1000
O
12. WTR-20 Wireless Remote (Standard)
WTR-20 Wireless Remote is a standard accessory for S-600 Yeti Snow Machine, it included a W-2 wireless
transmitter and a W-2 wireless receiver (Already on the machine) and it’s ready to use. If you encounter any
problem, please contact your local Antari dealer for assistant.

8
12.1 W-2 Wireless Transmitter & Receiver
Battery：27A 12V
Effective Range：The effective range is approximately 50m,
depends on actual condition, it may vary.
W-2 wireless transmitter has 4 buttons, each function as follow:
W-2 Wireless Transmitter
Button
Function
[A]
Press Once: Start
Press & Hold for 2 secs: Turn
off power
[B]
Adjust Snow Output
Range: 0/20/40/60/80/100%
[C]
Adjust Motor Output
Range: 0/20/40/60/80/100%
[D]
Adjust Fan Output
Range: 0/20/40/60/80/100%
W-2 Wireless Receiver
(On the Machine)
12.2 Pair & Unpair
Each receiver can pair up to 5 transmitters, please follow the steps below to pair or unpair;
Step 1. Press [MENU] button and select [Setting], find Screw the menu until [W.Remote] shows on display;
Step 2. Press [UP] button to select [Pair] then press [STOP] button, and press any button on W-2 transmitter to
pair it;
Step 3. Please repeat Step 2 to pair multiple transmitters;
Step 4. To unpair, repeat Step 1 and press [DOWN].
13. TIMO-WTR-90 W-DMX Add-on Module (Optional)
TIMO-WTR-90 W-DMX Add-on Module is an optional accessory for S-600 Yeti Machines. This is for wireless
ready machine wanting to add W-DMX function. Please see installation manual for details. If you encounter any
problem, please contact your local Antari dealer for assistant. The Wireless DMX Control supports both CRMX
and W-DMX protocols

9
14. SC-4 Cable Remote (Optional)
SC-4 Cable Remote is an optional accessory for S-600 Yeti Snow Machine, please see instruction below;
Button/Knob
Function
SNOW VOLUME [KNOB]
Adjust Snow Output
BLOWER SPEED [KNOB]
Adjust Motor Output
FAN SPEED [KNOB]
Adjust Fan Output
TIMER [YELLOW BUTTON]
Active Timer Mode
POWER [RED BUTTON]
Power On/Off
MANUAL [GREEN BUTTON]
Max. Snow/Motor/Fan Output
Note:
** You must turn on the power of the remote in order to use it.
** MANUAL [GREEN BUTTON] is meant for priming use, when use the machine for the first time, using a new
tank of fluid or refill the fluid may not pump properly due to airlock in the tube, you can use this function to
activate pump and fan at maximum output and force the air out the tube.
** If you encounter any problem, please contact your local Antari dealer for assistant.
15. S-600-BH 5 Liter Bottle Holder without Bottle (Optional)
S-600-BH 5 Liter Bottle Holder is an optional accessory for S-600 Yeti Snow Machine, please see installation
procedure below;
Step 1. Release the T Shaped Handle on S-600;
Step 2. Install the 5 Liter bottle holder;
Step 3. Screw the T Shaped Handle back to tightly.
16. S-600-TKC 20L Tank Cap Assembly w/5M Fluid Tube (Optional)
S-600-TKC 20L Tank Cap Assembly w/5M Fluid Tube is an optional accessory for S-600 Yeti Snow Machine, please see

10
installation procedure below;
17. Service and Maintenance
DANGER
Disconnect the power cord before starting maintenance operation!
Always keep the machine clean and dry.
Can use an air compressor, a vacuum or a soft brush to remove the dust on the machine.
Can use a slightly damp cloth to clean the casing.
Before store or after each use of the machine, pump pure water through the system for at least 1-2 minutes,
this will help clean the snow fluid residue and extend the lifespan on the pump and the machine.
It is recommended to run the machine at least once a month in order to maintain its best performance and
output condition.
Excessive dust and build up liquid residue will reduce the performance and cause overheat.

11
18. Technical Specifications
S-600
Rated Voltage
US Model: AC 100-120V, 50/60Hz 10.0A
EU Model: AC 220-240V, 50/60Hz 5.0A
Rated Power
1200W
Fluid Consumption
400 ml/min (100% output)
Fluid Tank Capacity
N/A
Compatible Fluid
Antari SL-N Snow & Foam Fluid (New Formula)、Antari SL-AN Premium Snow
Fluid (New Formula)、Antari SL-H Super Dry Snow Fluid、Antari SL-C Anti-
Freezing Snow Fluid、Antari SL-UV UV Snow Fluid
Ambient Temp. Range
5°C – 40°C (41°F – 104°F)
Control Methods
Manual、Timer、DMX512、Wireless、W-DMX (Optional)、Cable Remote
(Optional)
Interface
XLR 5-Pin Connector (DMX) 、XLR 4-Pin Connector (Remote) 、Neutrik
powerCON (Power)
DMX Channels
3 Channel
Included Accessories
WTR-20 Wireless Remote、5M Fluid Tube with Filter、Hanging Bracket
Optional Accessories
TIMO-WTR-90 W-DMX Add-on Module、SC-4 Cable Remote、S-600-BH Bottle
Holder (w/o bottle)、S-600-TKC 20 Liter Tank Cap assembly w/5M Fluid Tube
Dimension
L 462 W 596 H 630 mm (L 18.19 W 23.47 H 24.81 inch)
Weight
24.0 kg (52.90 lbs.)
19. Warranty Disclaimer
We guarantee the merchandise manufactured by us to be free from defect in material and workmanship for a period
of one year. Our obligation and liability under this warranty shall be restricted to repair or replacement at our
factory or local authorized dealer. We assume no liability of the products that are improperly used or used for any
purpose other than that for which they are specially designed. This warranty shall not apply to any merchandise
which has been repaired, altered or assembled outside our factory in any way so as in our judgment to affect its
performance, nor which has been subjected to misuse, negligence, or accident nor to any merchandise operated
contrary to our printed instructions. We will not allow or be liable of any loss or any damages of any kind in
connection with the use, sale, or repair of any merchandise purchased from us.
20. Machine Dimension

12
中文使用說明書
1. 前言
在操作本機器之前，請務必仔細詳閱本說明書然後請將本說明書放置在機器使用者可隨時查閱之處存放。
此說明書包含如何安全的安裝及操作本機器以及說明所有在機器上的標示。如果您有任何操作上的問題，
請立即聯繫當地的 Antari 經銷商尋求協助。
2. 安全注意事項
危險
若不確實避免這些指示，可能導致嚴重人身傷害甚至死亡。
警告
若不確實遵循這些指示，可能導致嚴重人身傷害甚至死亡。
注意
若不確實注意這些指示，可能導致人身傷害甚至死亡，嚴重程度視情況而定。
危險
請務必使用正確電壓。如果使用錯誤電壓，可能會遭受危險的電擊燒傷或更嚴重的後果。
請務必將機器連結到有保護的電路，並確保有正確的接地，以避免觸電的危險。關於接地方式請參考
第23 頁附錄 I。
請勿在捆綁電源線的情況下使用，可能會發熱導致火災。
操作機器時請 勿 將 機 器 對 著 人 體 、動物或火 焰使用。
警告
請於堅固、平坦、穩定且通風良好的表面上使用機器。請勿遮蓋機器散熱部份，機器周邊至少應保留
50 公分的空間並確認附近沒有易燃性物質或可揮發性氣體。
請勿隨意拆卸、修理或改造機器，這可能會導致機器故障、損壞、觸電危險或造成火災。
本機器僅限有行為能力之成人或專業人員操作，不預期提供生理、感知、心智能力、經驗或知識不足
者之使用者(包含孩童)使用本機器。
請勿在無人看管時讓機器運作，並 於 外 出 離 去 時 確 實關閉 電 源 。
孩童應受監督，以確保孩童不能操作或嬉戲玩本機器。
請勿將機器放倒或傾斜使用，可能導致機器動作不正常或損壞。
請將液體存放在室內孩童無法取得之處，保持通風及避免陽光直射。如果有觸碰眼睛或誤食機器，請
立即尋求醫生的協助。
注意
本機器無防水設計，請隨時保持機器乾燥，嚴禁將其潑水、浸水、淋雨或放在潮溼的環境。
在插 入 電 源 插 座前 ，請確認電 源 插 座無損壞或鬆動。
若電源線損壞，必須使用原廠電源線或組件進行更換，否則將導致保固無效。
請在使用機器之前，先填裝好雪花水，避免機器幫浦空轉過熱造成損害。機器在搬運前或使用完畢
後，請清空油桶。

13
在運輸本機器前，請確認機器的油桶已清空並且包裝完整。(建議使用原廠包裝)
本產品僅限室內使用。
請勿在電壓不穩定的地區使用本機器。
如果機器出現異常聲音或有任何不正常現象時，請立即停止工作，將電源關閉及拔下機器電源線，並
請聯繫當地的 Antari 經銷商尋求協助。
請勿觸碰機器內部運轉零件。
只能使用原廠建議或販售之配件。
請確認機器不在使用的狀態下電源已關。如果長時間不使用機器，請拔掉電源線。
關閉機器時，將控制開關轉到關閉的位置，然後再將插頭從插座拔除。
拔除電源線時，請抓住插頭不是電線。
在保養及清潔前，請把電源線從插座拔除。
在電線或插座有損毀、機器故障或有掉落或損壞的情形發生時，請勿操作機器。請將機器送回最近的
維修站，做檢查、維修及電源或機械的調整。
為確保機器的使用壽命，請使用 Antari 原廠製造之雪花水，勿使用其它非 Antari 原廠製造雪花水或添
加劑，否則可能會導致故障。
在使用本機之前，請詳細閱讀機器上的警語標示，說明如下：
後蓋印刷
WARNING! 警告!
DISCONNECT POWER BEFORE CHANGING FUSE. 更換保險絲前請務必斷開電源
USE ONLY WITH ADULT SUPERVISION. 僅在成人監督下使用
DO NOT OPERATE WITHOUT LIQUID. 請勿在沒有液體的情況操作本機台
FOR INDOOR USE ONLY. KEEP DRY. 僅限室內使用 請保持乾燥
NO USER SERVICEABLE PARTS INSIDE. 內部無使用者可維修之零配件
3. 包裝內容與檢查
在收到機器後，請立即小心地打開包裝紙箱，檢查所有內容，確認您所購買的機型及配件。如果有任何部
件因運輸過程出現損壞或缺少，請立即連絡經銷商，並以原包裝退回檢查。
3.1 包裝內容
1 x S-600 Yeti 雪花機
1 x WTR-20 無線控制器
1 x Neutrik powerCON 電源線
1 x 5 米長油管含濾嘴
1 x 吊架
1 x 說明書或掃描機身 QR CODE
3.2 選配說明
品項
描述
SC-4
有線控制器
TIMO-WTR-90
無線 DMX 擴充模組
S-600-BH
5公升油桶座不含油桶
S-600-TKC
20 公升油桶蓋組含 5米油管

14
4. 機器訊息
01. 噴雪口
06. 數位控制面板
02. 油管連接頭
07. XLR 4-Pin 連接頭(控制器)
03. 2 合1電源開關
08. W-2 無線接收器
04. Neutrik powerCON 連接頭(主電源)
09. T 型手把
05. XLR 5-Pin 連接頭(DMX)
10. 把手
5. 技術標籤資訊
使用本機器前，請詳閱技術標籤上的訊息
1. 機器型號
5. 斷路器/保險絲
2. 工作電壓
6. 說明書 QR CODE
3. 頻率
7. 機器流水序號
4. 瓦特數
6. 雪花水
危險
將液體加入機器之前，請務必先拔除電源線。請勿添加易燃液體。如果發現液體
流入機器內部，請洽 Antari 原廠或其經銷商尋求協助。
僅能使用 Antari 原廠製造之雪花水，不可混用或稀釋。
本機器是使用專屬的雪花水做測試與校正來取得最佳的效能。
如需更換另一種液體，請在使用前，先將油桶中的液體清空，以避免混合。
如果使用非原廠製造之雪花水而導致雪花機損壞將不在保固範圍內。

15
7. 設定與手動操作說明
警告
機台掉落可能會造成嚴重傷害，請確保本機台安裝牢固且不會掉落。
步驟1. 將機器平放在堅固、平坦、穩定且通風良好的表面上，機器周圍至少應保留 50 公分的空間並確
認附近沒有易燃性物質或可揮發性氣體;
步驟2. 使用 ANTARI 原廠雪花水;
步驟3. 請將隨附的 5米油管接到機器上的油管接口，並將濾嘴端放入採購的雪花水桶中(請注意不要折
到油管);
步驟4. 將機器連接電源，連接之前，確認機器背後技術標籤上所標示要求功率，是否與電源插座相符;
步驟5. 開啟電源，按下[TIMER]鍵開始噴雪，按下[STOP]鍵停止噴雪;
步驟6. 或按下[VOLUME]鍵開始噴雪，按下[STOP]鍵停止噴雪;
步驟7. 需關閉本機時，請確認機器已停止運轉，再將電源開關關閉即可，長時間不使用時請移除電源
線。
***當雪花機停止輸出時，馬達會在運行 5秒才會停止，待馬達停止後，才能關閉機器。
連接油管方式:
8. 控制設定
S-600 Yeti 雪花機可以使用下列操作模式，機器每次接受一種訊號
手動控制
定時控制
DMX512
無線 DMX
無線控制
有線控制
8.1 控制面板說明

16
S-600 Yeti 雪花機可以使用機器上的數位控制面板來操作。
按鈕
操作方式
功能
按
進入選單畫面及瀏覽
按
增加數值 / 上 (在選單中)
按
減少數值 / 下 (在選單中)
按
啟動”TIMER”模式(Ready 狀態)
按
啟動”VOLUME”模式(Ready 狀態)
按
停止/確認/返回
8.2 選單說明
選單
說明
Interval xx min
設定時間間隔 1 - 240 分鐘。
Duration xxx min
設定雪花輸出時間 1 - 999 秒。
Volume Out xxx%
設定雪花輸出量 0 - 100%。
Blower xxx%
設定雪花機馬達轉速：0至100%。
可調整落雪顆粒大小。0% 顆粒最大；100% 顆粒最小。
FanSpeed xxx%
設定大風扇輸出量：0至100%。
DMX512 Add: xxx
DMX-512 位址: 001-510(本機佔用 3頻道)。
Wireless On/Off
開啟/關閉 無線功能
Run Last Set On/Off
開啟/關閉 記憶模式(選擇 ON 機器會記錄最後一次設定)
LinkMode Wired/Wireless
連接模式：Wired 有線 / Wireless 無線
W-DMX Unlink?
無線 DMX 配對：取消連接
W-DMX
---
無線 DMX 訊號狀態
W-DMX ok
無線 DMX 發射器已對頻，接收到 DMX 訊號
No DMX
無線 DMX 發射器已對頻，但沒有 DMX 訊號
TX Lost
無線 DMX 發射器連接遺失/正在與發射器連接
Unassign
沒有對頻任何無線 DMX 發射器
UID 1ED8 06020001
產品 UID 碼
Run Time 0000000H
雪花機噴雪累計時間：0 - 9999999 小時
W. Remote Pair/Upair
無線遙控：Pair 配對 / Unpair 取消配對
KeySound Set On/Off
按鍵音：On 開啟 / Off 關閉
Backlite AlwaysOn/AutoOff
LCD 背光：Auto Off 自動關閉 / AlwaysOn 常亮
Default Proceed?
恢復原廠設置

17
9. 機器狀態說明
面板畫面
說明
S-600 v1.0
機種版本
AC Input AC-XXX
使用電壓
Ready To Snow
噴雪就緒
Remote Out xxx%
線控器執行中(插上線控器 SC-4 時才會顯示此頁面)
Volume Out xxx%
手動噴雪執行中
Interval xxx min
定時噴雪執行_間隔時間
Duration xxx sec
定時噴雪執行_噴雪時間
DMX-512 Add: xxx
顯示目前通道位址
Priming 100%
強制抽油執行中
Wrong Voltage!
電源電壓輸入錯誤
AC Power Failure
AC 電源失常
10. DMX 說明
10.1 DMX 說明
本機可提供一個 XLR 5-PIN 的DMX 連接頭選擇。下為 PIN 的接點說明：
Pin
功能
1
Ground
2
Data-
3
Data+
4
N/A
5
N/A
DMX IN 連接頭上的蓋子是一個保護蓋，操作前，
請用手指撥開即可輕鬆地將其取下。
10.2 DMX 通道功能設定
通道 1
DMX 數值範圍
功能
雪花輸出量
0 – 5
關閉
6 – 255
開啟，輸出 1 – 100%
通道 2
DMX 數值範圍
功能
雪花馬達轉速
0 – 5
關閉
6 – 255
開啟，輸出 1 – 100%
通道 3
DMX 數值範圍
功能
風扇速度
0 – 5
關閉
6 – 255
開啟，輸出 1 – 100%

18
11. RDM 功能
S-600 Yeti 配有 RDM 功能，讓使用者可以經由 DMX 網路使用 RDM 功能進行機台的設定、監控、管理。
RDM 支援參數表如下
GET Allowed
SET Allowed
Category
類別
RDM Parameter ID’s (Slot 21-22)
Value
Required
Network
Management
網路管理
DISC_UNIQUE_BRANCH
0x0001
O
DISC_MUTE
0x0002
O
DISC_UN_MUTE
0x0003
O
O
RDM Information
RDM 資訊
QUEUED_MESSAGE
0x0020
O
SUPPORTED_PARAMETERS
0x0050
O
O
PARAMETER_DESCRIPTION
0x0051
O
O
Product Information
產品資訊
DEVICE_INFO
0x0060
O
O
PRODUCT_DETAIL_ID_LIST
0x0070
O
DEVICE_MODEL_DESCRIPTION
0x0080
O
MANUFACTURER_LABEL
0x0081
O
O
DEVICE_LABEL
0x0082
O
SOFTWARE_VERSION_LABEL
0x00C0
O
O
O
DMX512 Setup
DMX512 設定
DMX_PERSONALITY
0x00E0
O
DMX_PERSONALITY_DESCRIPTION
0x00E1
O
O
DMX_START_ADDRESS
0x00F0
O
O
SLOT_INFO
(0x0120)
O
SLOT_DESCRIPTION
(0x0121)
O
DEFAULT_SLOT_VALUE
(0x0122)
O
Sensors
感應器
SENSOR_DEFINITION
0x0200
O
O
SENSOR_VALUE
0x0201