Antec Basiq BP550 PLUS User manual

Basiq
BP550 PLUS
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
পᡅ䂀ᯢ᳌
Ё᭛Փ⫼᠟ݞ

1
User’s Manual
Antec Basiq User’s Manual
ATX12V version 2.2 power supply
Model BP550 PLUS
Antec Basiq series power supplies are built to be compatible with the ATX12V version
2.2 specification. They include triple 12V output circuitry that delivers safer and
more reliable output to your system’s components, as well as higher energy
efficiency, which reduces power consumption by up to 25%, saving you money
on your electricity bill. In addition we’ve included a variety of protective circuitry:
OPP (Over Power Protection), OVP (Over Voltage Protection), and SCP (Short
Circuit Protection).
BP550 PLUS includes Universal Input with Active Power Factor Correction (PFC).
Universal Input allows you to connect your Antec Basic power supply to any AC
power outlet between 100~240V without having to worry about setting a voltage
switch. Active PFC improves the power factor value to the power supply by altering
the input current wave shape, helping the power plant provide power to users
more efficiently.
Power Switch:
This power supply comes with a main power switch. Make sure you turn the
switch to the ON ( I ) position before you boot up your computer for the first time.
In normal operation there is no need to turn the switch to the OFF (O) position
since the power supply is equipped with a soft on/off feature which turns your
computer on and off through the soft switch on your computer case. You may
need to turn the switch to the OFF position occasionally should your computer
crash and you cannot shut it down through use of the soft switch.
Installation:
1. Turn off the hard power switch on your old power supply if any.
2. Open your computer case. Follow the directions provided in your case manual.
3. Disconnect all power connectors from the motherboard and from the peripheral
devices such as case fans, hard drives, optical drives, floppy drives, etc.
4. Disconnect the power cord from your old power supply.
5. Remove the existing power supply from your computer case and replace it
with your new Antec power supply. (Illustration 1)
1

2
6. Turn the hard switch on the Antec power supply to the OFF (O) position and
connect the AC power cord to the power supply.
7. Connect the 24-pin Main Power Connector.
(Illustration 2) If the motherboard uses a 20-pin
connector, detach the 4-pin attachment on the
24-pin power connector (see pictures 1 and 2).
Note: the detachable 4-pin section cannot be used in
place of a 4-pin +12V connector.
8. Connect the 4-pin (Illustration 3a) or 8-pin (Illustration 3b) 12V connector to
the motherboard as needed.
Picture 1 Picture 2
For 24-pin
motherboards
For 20-pin
motherboards
2
3a
3b

3
9. If your video card requires a PCI-E Connector, then connect the cable from
the main wire bundle to your video card.
10. Attach modular cables from the included cable pack as needed. (Illustration 4)
11. Connect the Drives and Accessories Cable to devices such as hard drives,
optical drives, fans, etc.
12. Connect the SATA cable if you are using a Serial ATA hard drives.
13. If you are running a pair of PCI-E cards or a single PCI-E Card that
requires two power connectors, then you will need to use the modular PCI-E
cable. Connect the cable to the red socket on the power supply. Then
connect the PCI Express power connector to your PCI Express graphic card
as needed.
14. Close your computer case.
Advanced cable management system
The Basiq BP550 Plus PSU features Antec’s advanced cable management system,
which allows you to use only the power cables that you need, thereby reducing
clutter and improving airflow inside your case. Cables and connectors are
described in Table 1.
4

4
Cable
Quantity
Power
Connectors
Part Name Description
Power supply
24-pin (with 4
detachable pins)
motherboard
connector, 8-pin
+12V
connector, 4-pin
+12V
connector, 8-pin
(with 2
detachable pins)
PCI-E connector

Drives and
Accesso cable
Includes three Molex
connectors and one
floppy connector
SATA cable
Includes three
Serial ATA
connectors
Secondary PCI-E Includes one PCI
Express connector
Table 1
x3
x1
x3
x1

Antec, Inc.
47900 Fremont Blvd.
Fremont, CA 94538
USA
tel: [phone]
fax: [phone]
Antec Europe B.V.
Stuttgartstraat 12
3047 AS Rotterdam
The Netherlands
tel: [phone]
fax: [phone]
Customer Support:
US & Canada
1-800-22ANTEC
[email protected]
Europe
[phone]
[email protected]
www.antec.com
© Copyright 2007 Antec, Inc. All rights reserved.
All trademarks are the property of their respective owners.
Reproduction in whole or in part without written permission is prohibited.
Printed in China.