-5-
-6-
-7-
-8-
-9-
Remove the battery box cover.
Press any key to activate the
lock.
The Nixie tube shows “--”. Hold key for 3sec. Then it shows “Ad“.
Please verify Admin FP or
swipe Admin card to enter
the registration status.
It shows “ID” number, press
or key to select ID then
press to confirm.
Place one user finger twice on
the fingerprint sensor or swipe
card on the card area twice
(Please enable card function).
Next ID number will be
displayed after successful
registration.
Press to continue register
user or Press key to exit
registration status.
1 2 3 4
5 6 7 8
Remove the battery box cover.
Press any key to activate the
lock.
The Nixie tube shows “--”. Pressing key. Then it shows “Ad’’.
Please verify Admin FP or
swipe Admin card to enter
the registration status.
The Nixie tube will display
normal user ID: 01. Please
press and key to select
and press to enter the
registration status.
(User ID range is 01-95)
Place one user finger twice on
the fingerprint sensor or swipe
card on the card area twice.
Next ID number will be
displayed after successful
registration.
Press to continue register
user or press key to exit
exit register status.
1 2 3 4
5 6 7 8
OK
OK
C
C
-
-
-
-
-
* Note:
One ID only can register one fingerprint or one card.
Remove the battery box cover.
Press any key to activate the
lock.
The Nixie tube shows “--”.
1 2
5 6
3 4
Place one Admin finger twice
on the fingerprint sensor or
swipe card on the card area
twice.
Next ID number will be
displayed after successful
registration.
Press to continue
register user or press key
to exit register status.
C
When it shows admin ID:
96, press or to select
ID then to confirm.
(range : 96-99)
OK
Hold key for 3sec.
Register First Administrator (The first time uses lock to register administrator.)
Register other Administrators
Register Normal User
Delete User
Delete Administrators
Remove the battery box cover.
Press any key to activate the
lock.
The Nixie tube shows “--”. Pressing key. Then it shows “Ad’’.
Please verify Admin FP or
swipe Admin card to enter
the registration status.
OK
When the Nixie tube flashes,
please press and key to
select “FP”, “AL” or “ID”
number and press .
1 2 3 4
5 6
Remove the battery box cover.
Press any key to activate the
lock.
The Nixie tube shows “--”. Hold key for 3sec. Then it shows “Ad’’.
Please verify Admin FP or
swipe Admin card to enter
the registration status.
When the Nixie tube flashes
please. press and key to
select “FP”. “AL” or “ID”
number. Then press .
1 2 3 4
5 6
OK
OK
OK
OK
Normal Operation Mode
7
OK
If "AL" selected, Press key after six beeps form the lock all of the
administrators will be delete. The lock will auto logout deletion status.
OK C
If "ID" selected, press to delete the appointed administrator. Press
key to exit delete status or press and key to continue select ID
number delete the appointed administrator.
OK
OK
C
If "FP" selected, Press key need to place administrator finger twice
on the sensor or swipe card twice to delete. Press key to continue
delete other administrator or press key to exit delete status.
7
OK
OK
C
If "FP" selected, Press key need to place finger twice on the sensor
or swipe card twice to delete. Press key to continue delete other
users or press key to exit delete status.
OK
If "AL" selected, Press key after six beeps form the lock all of the
normal users will be delete. The lock will auto logout deletion status.
OK C
If "ID" selected, press to delete the appointed user. Press key to
exit delete status or press and key to continue select ID number
delete the appointed user.
