-20~+70°C
3A/12VDC
3A/120VAC
NC/COM/NO
Red/Green
(with color switch)
LED Indicator Light
PBT-1100/1150 Push Button
◆ Specifications
◆ Wiring Diagram
Operation Instructions
Operating Voltage
Current Draw
Model
Output Contacts
Contact Rating
Temperature
The PBT-1150 includes one pair of NO and
NC output contacts, which can directly
connect to a locking device or connect in
parallel or series with access control systems.
86mm
86mm
38mm
Note:
1. Make sure that the power input and relay
rating output (3A 120VAC/3A 12VDC) are correct.
2. Make sure that the “+” and “-” wires are
connected correctly.
3. The door strike or relay must have a varistor
or a diode across the door strike terminals to
suppress the back EMF of the strike. Failure to
do so will damage the relay contacts and
electronic components, or even burn the
controller.
-
-
-
N.C.
COM
N.O.
-
-
-
P. B .
P. B .
-
-
-
-
-
-
N.C. COM N.O.
+
-
Electromagnetic Lock
(fail-safe)
Electric Strike
(fail-secure)
Digital Keypad
(OUTSIDE)
(INSIDE)
Relay
Power
Supply
PBT-1100 PBT-1150
12/24 VDC/AC
30~40mA/12VDC
40~60mA/24VDC
PBT-1150
Copyright © All rights reserved. P-MU-PBT1100 Published 2020.10.21
