Aovo W11 User manual
W11
Quick Guide
(Please keep and read this manual carefully before using this product)
4
www.aovotoys.com
-01-
Download APP
OPERATION GUIDE
Scan the QR code, corresponding to either App Store™ or Google™ Play
Store and download the “ W - GPS ” application for free.
Required Operating Systems: iOS v8.0 and later / Android v4.3 and later
iOS Android APP on Google play
Tips: Please use a smartphone that can support receiving 2.4G and 5G WiFi
signals.
Pairing
①First, press the drone Power Switch and quickly release. Then, press again
and hold for approximately 2 seconds. The drone will emit a sound and the
battery LED's will brightly illuminate indicating it is now powered up.
Place drone on a flat, level surface with the head facing forward.
②Turn on the switch on the controller by sliding it to the top. Once the
controller emits "beep-beep" sound it confirms that the drone and controller
are now successfully paired.
OFF ON
-02-
Calibrating the Compass
After pairing operation, the LED lights of the drone are sharp-flashing, that
mean is begin compass calibration.
Step 1:
Now, the APP interface displays the above diagram and the Compass calibra-
tion icon in controller screen is flashing. Hold the drone horizontally and
rotate the drone in approximately 3 complete circles. When completed, the
controller emits a “beep” sound and the drone's
Pic 1
Connect to Wi-Fi
① Connect your smart phone to the Wi-Fi network created by the drone.
Check the drone’s status in the ”W - GPS” App.
②Your smartphone will launch a search of the available Wi-Fi networks:
③Select the Wi-Fi network: AOVO-W11-******.
④Wait for several seconds until your smartphone connects to the drone's Wi -Fi
network.
This connection is generally represented by the Wi-Fi logo appearing on
your smartphone’s screen.
⑤Launch the W - GPS application.
> The connection between your smartphone and the drone will be
established automatically.
AOVO-W11-******
-03-
HEAD
Gyroscope calibration
Slide right to confirm
Now, the APP interface displays the diagram (Pic 3). Place the drone on the
level surface and . The LED lights of the drone will flash
rapidly for about 3 seconds. When completed, the front and rear lights turn
solid. Or press the Gyroscope calibration switch “ ” on the remote control.
The LED lights of the drone will flash rapidly for about 3 seconds. When
completed, the front and rear lights turn solid.
Pic 2
Pic 3
Slide right to confirm
Please confirm whether horizontal
calibration is carried out
Cancel
Step 2:
Now, the APP interface displays the diagram. Hold the drone vertically and
rotate the drone in 3 complete circles. When completed, the controller
emits a “beep” sound and the drone's LED lights become solid and the
Compass calibration icon in controller screen is solid on.
Attention:
·The Gimbal is detecting 10 seconds after compass calibration, please do
not touch the Gimbal directly, otherwise the Gimbal may damaged.
·
When it indicates “Equipment connected (GPS Model)” in the APP
interface, means that the drone receives the GPS signal.
Now, the rear LED's
of the drone will flash twice per second.
·Every time the drone is powered on the compass calibration should be
performed.
-04-
Unlocking/Locking the Motor
Pic 4
Please unlock the motor before take-off.
Press the button “ ” , the motors rotate.(Pic 4)
①Unlocking the motor
Please unlock the motor while it indicates “Equipment connected (GPS Model)”
in the APP interface.
②If you do not perform any operation approximately 10 seconds after unlocking
the drone, the motors will stop rotating.
③ Press the button “ ” again, the motor will stop rotating and the drone will be
locked.
①②
One Key Takeoff/Landing
①After unlocking the drone, press the “ ” button on the controller
and the drone will automatically take off and hover at 1.5m altitude. Or
press the “ ” in the APP interface, then “ ”after
unlocking the motors.
②When drone is flying, press the “ ” button on the controller, the
drone will fly back to the Home Point and automatically land on the
ground.
Landing
Take-off
Tips:
Before flying, make sure the GPS Mode is turned on in case the drone gets
lost!
Slide right to confirm
-05-
CONTACT US
Please do not hesitate to contact us if you need further support.
Table of contents
Other Aovo Quadcopter manuals
