Apogee MC-100 User manual

Installing New Coeicients
on Your MC-100

2. Click the zip le link for whatever coecients you want to
download.
3. Connect the meter to your computer using the microUSB-to-USB
cable (included with your meter).
4. Turn the meter on and press the Data buon. The meter should
now read “USB Link Acve!”
1. On the chlorophyll support page, click on the New Coecients
bookmark.

6. Select the extracted les and copy them.
7. Navigate to and open the MC-100’s le directory. 8. Paste the copied coecient les in to the MC-100’s memory.
5. On your computer, go to the locaon of the downloaded
coecients zip les and extract its contents.

Conrming and Selecting
New Custom Units

1. Press the Eject buon and disconnect the USB cable. 2. From the Home menu, press the Run buon to access the Test
menu.
3. Press the Setup buon to access the MC-100 Test Setup menu. 4. Press the up buon to reach the Custom Measurement menu.

6. Press the right arrow buon to go to the Unit Selecon menu.
7. Scroll through the selecons of units to conrm your new
coecients.
8. Highlight a coecient and press the Accept buon to begin using
the coecient.
5. Press the Edit buon. Make sure the unit’s heading is set to “Yes”.