Operation
Read Message
1. A flashing symbol indicates you
have a message has not been read.
(The symbol of mail drop shows on
screen by flashing).
2. Press or , to preview the
message.
3. Press , to display your message.
Press again, to view
If you have set " Auto Scroll " , your pager
will scroll through your message
screen by screen automatically
Locking Message
1. Press or , to move the cursor
to the desired flashing symbol .
2. Press , press or to select
the desired message to lock.
3. Press , to lock the message.
4. The symbol is displayed , indicating
the status of the message in memory.
Delete Message
1. Press or , to move the cursor
to select the message you desire.
Press to read the message.
2. Press , press or , to
delete the message.
Delete All Message
1. Press or , press ,
to delete all unlocked and read
messages.
Move Message To Memo
1. Press or , to move the
cursor to the desired storing
message. Press to read the
message.
2. Press
to move to memo.
Reading Full Message
1. Press or , to move the
flashing icon to the symbol. Press
, to read message.
2. When the symbol is shown in the
top left-hand corner of the display ,
indicates the message status as a full
message.
Set Alert
1. Press and or to " SET
ALERT " Mode .
2. Press , to enable "SET ALERT".
3. Press or , to move the cursor
to the desired alarm mode. (BEEP
/FLASH ONLY /VIBRATE AND BEEP
/ VIBRATION )
4. Press setting the alert is
completed.
Set Alarm
1. Press and , to" SET ALARM "
mode .
2. Press or to alarm 1-5.
3. Press to , then press or
to on/off the alarm.
5. Press to , then press or
to set the time.
Auto Sleep Set
1. Press and to " Auto Sleep Set "
Mode.
2. Press or , to trun on/off
the auto sleep set.
3. Press to , or set
the start time. Press to
, or set the end time. The
screen returns to stand - by status.
4. is displayed when the Auto Sleep
mode is set.
5. The enable symbol indicates your
pager is under auto sleep mode.
Set Scroll
1. Press and to " SET SCROLL "
mode .
2. Press or to set the scroll
speed.
3. Press to activate the function.
5. When the auto scroll is set, the
symbol is displayed on screen.
Zoom In / Out
1. Press and , then press
or to select "ZOOM IN."
2. The letters on screen enlarge and
become 3 lines to read.
3. Or press or to move the
cursor again to "ZOOM OUT,"
and press to complete.
4. The letters on screen change to 4 lines
to read.
